Liczymy pasujące modele…
Build your own IoT NeoPixel lamp inspired by EPCOT Spaceship Earth! Use a QT Py ESP32 PICO, NeoPixel BFF Driver and WLED to make amazing lighting effects! Designed by Noe Ruiz for Adafruit Industries Learn Guide…
Here I have recreated Spaceship Earth. It consists of a geodesic sphere consisting of 980 polygons subdivided into 3 triangles each, with the center point pushed outwards slightly, perched atop 3 legs and a center base. I have provided…
Wife needed this as a planter so I hollowed it out.
I modified the Spaceship Earth model to hold an Amazon Echo Dot (2nd gen). Holes were added to let sound out of the bottom mounted speaker and a hole was added to access the USB and audio jacks on the back side. To align the cover with…
Remixed from: https://www.thingiverse.com/thing:3084118 Credit goes to SnickerdoodleFP Hollowed out the above Spaceship Earth model to make a bowl to hold keys, jewelry, etc. Also printed in clear PLA to be able to stick an LED inside to…
Print with the rim of the half facing down, and pins if you want it to stay together. Add supports to the underside of the top of the dome, with a 0.1mm offset for the supports for less sagging on the bridges. Made in Blender, after…
Modified the base half of the original model to remove the center pillar. It wasn't structurally needed and created more points to mount LEDs to, because of that this project uses 162 NeoPixel LED instead of the original 156. The first…
This version of Adafruit's Spaceship Earth accommodates common 6x3mm magnets and adds the proper depth to the tabs so you can press-fit them in with some needle nose pliers. If you prefer not using tools, there's an optional 6.2mm model…
I'm a sucker for nostalgic prints and a big fan of the classic Epcot logos from the original pavilions. On a recent trip I realized they would make fantastic coaster designs. Since I couldn't find them, I made it happen myself. I took…
When Donald, Jose, and Panchito took over the boat ride inside the Mexico Pavilion in 2007, the famed caballeros' faces graced almost every surface of the ride's landscape. That included in the papel picado that dangle above the boats as…
These are quarter-sized tokens representing each of the pavilions at Epcot when it opened in 1982, including the Odyssey and main Epcot Logo. These are small and detailed. I printed with a 0.25 nozzle on a Revo 6 hotend (highly…
Figment is a small, purple, dragon-like creature who serves as the beloved mascot of Epcot's Imagination! pavilion at Walt Disney World. Created specifically for the "Journey Into Imagination" attraction (which debuted in 1983), Figment…
Contemporary Resort Epcot Center Disney World
I printed with these using PETG, without any support but with a mouse ear brim since those were the easiest to remove.
An EPCOT Mickey ear for your trip to Disney. Meant to be interchangeable with most 5 magnet Mickey ear models and headbands.
Looking for a fun way to show appreciation to the wonderful castmembers? We've designed these “Challenge Coins” as a fun way to express our gratitude to our favorite cast members at every park. Featuring the memorable designs of out…
Pinboard inspired by Spaceship Earth at EPCOT For every EPCOT loving Disney pin trader! There are 2 versions of the legs, one for hanging the board on the wall and another for a free standing option. There is a nail hole on the back for…
Bay Lake Resort Epcot Center Disney World
A frame/display for epcot passports. One for just the passport and one where you can also display the festival magicband. Print Settings Rafts: No Supports: No Infill: 20 Category: Decor
This 3D model accurately recreates the classic Epcot Center logo used from the park's 1982 opening until 1994. The design prints at a uniform 8.3mm thickness with raised text. No AMS system needed. For multi-color printing, simply pause…
Bring home a piece of the World Showcase with this fan-art model of the iconic white monster from the Epcot Japan Pavilion! This highly detailed sculpt captures the fierce, hairy "snow demon" or "guardian lion" that sits on a classic blue…
Just another take on the huge number of extrusion indicators out there. I'm a big fan of Spaceship Earth and have always loved Epcot's icons. Like most of the other ones out there, just superglue two 8mm magnets to the back and it pops…
Bring your favorite designs to life with this high-quality, layered keychain! Designed with 3D printing in mind, this model features distinct height levels for each color, making it incredibly easy to achieve a vibrant, multi-colored look…
I created this Christmas Ornament from Epcot's The Land Pavilion logo. It is multicolored and I changed the colors manually. 0.4 Nozzle 0.20 Layer Height I used Elegoo PLA+ Neon Green and VoxelPLA White There are about 5 color changes.
I designed these in TinkerCad. Print with PLA; no support or special settings required. I did a filament color change to make the designs pop.
I created a Christmas Ornament based on the Epcot World of Life Pavilion logo. Settings 0.4 nozzle 0.20 layer height 5-6 color changes that can be done manually I used Paramount 3D PLA Hannibal Red and Voxel PLA+ White
This is inspired by the Disney Monorail passing near EPCOT's Spaceship Earth Print with no supports. Created in Blender by Claude Opus 5.5 through Hermes.
I created this Christmas Ornament from Epcot's Spaceship Earth Pavilion logo. It is multicolored and I changed the colors manually. 0.4 Nozzle 0.20 Layer Height I used Paramount 3D PLA McLaren Orange and VoxelPLA White There are about 5…
I created a Christmas Ornament based on the Epcot Retro version of World Showcase Pavilion logo. Settings 0.4 nozzle 0.20 layer height 5-6 color changes that can be done manually I used Elegoo Rapid PLA Yellow and Voxel PLA+ White
I created a Christmas ornament using the WDW EPCOT Imagination Pavilion logo. Print Settings are in the .3MF file but here is a summary: 0.4 nozzle 0.2 layer height 15% infill one color change at the end I used Panchroma Translucent…
I created this Christmas Ornament of WDW EPCOT's The Seas Pavilion logo. The settings are in the 3mf file but here is a summary: .4 Nozzle .20 layer height 15% infill 4-5 manual color changes (if you want less then please feel free to…
I created a Christmas Ornament based on the Epcot Horizons Pavilion logo. Settings 0.4 nozzle 0.20 layer height 5-6 color changes that can be done manually I used Prusament PLA Gentlemen Grey and Voxel PLA+ White
I created a Christmas Ornament based on the Epcot World of Motion Pavilion logo. Settings 0.4 nozzle 0.20 layer height 5-6 color changes that can be done manually I used Village Plastics Blueberry PLA (I don't think they make it any…
I created a Christmas Ornament based on the Epcot Communicore Pavilion logo. Settings 0.4 nozzle 0.20 layer height 5-6 color changes that can be done manually I used Prusament PLA Galaxy Purple and Voxel PLA+ White
I created a Christmas Ornament based on the Epcot Universe of Energy Pavilion logo. Settings 0.4 nozzle 0.20 layer height 5-6 color changes that can be done manually I used Hatchbox PLA Red and Voxel PLA+ White
The original model appears to have been built from laying three layers on top of each other without proper alignment, which results in very visible offsets around the sides of the frame. In response, I redesigned the frame in Tinkercad as…
I created a Christmas Ornament based on the Epcot Horizons Pavilion logo. Settings 0.4 nozzle 0.20 layer height 5-6 color changes that can be done manually I used Prusament PLA Gentlemen Grey and Voxel PLA+ White
I created a Christmas Ornament based on the Epcot World of Motion Pavilion logo. Settings 0.4 nozzle 0.20 layer height 5-6 color changes that can be done manually I used Village Plastics Blueberry PLA (I don't think they make it any…
I created a Christmas Ornament based on the Epcot Communicore Pavilion logo. Settings 0.4 nozzle 0.20 layer height 5-6 color changes that can be done manually I used Prusament PLA Galaxy Purple and Voxel PLA+ White
the logo of EPCOT from disney world, its 4 pieces, you can snap the white parts in the grey parts so you dont need a multicolor printer. You can scale the model if it does not fit your printer, currently needs a 220x220mm bed.
I created a Christmas Ornament based on the Epcot Logo. Settings 0.4 nozzle 0.20 layer height 5-6 color changes that can be done manually I used Prusament PLA My Silverness and Voxel PLA+ White
Simple print for making a custom pair of mouse-ears. Simply print and hot-melt glue on-to a head band. Category: Costume
A simple model that I made in Solidworks for one of my favorite Disney Logos.
Customized version of http://www.thingiverse.com/thing:671884
