Liczymy pasujące modele…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
🇬🇧 – English – A collection of 23 snowflakes with hanging loops for decoration purposes, 7-9 centimeters big. The same snowflakes with hanging loops are here . 🇨🇿 – Czech – Sněhová vločka 23x jinak s očky na zavěšení, 7-9 centimetrů…
🇬🇧 – English – A collection of 34 snowflakes for decoration purposes, a bit thin ones. They are all around 5 cm big. A thicker snowflakes of the same size are here . Smaller models, around 2.5 cm in size, are here . And here with hanging…
🇬🇧 – English – A collection of 34 snowflakes for decoration purposes, a bit thick ones. They are all around 5 cm big. Thinner snowflakes of the same size are here . Smaller models, around 2.5 cm in size, are here . And here with hanging…
🇬🇧 – English – A collection of 25 small snowflakes for decoration purposes. A version with hanging loops is here . Bigger models, around 5 cm, are here and here . 🇨🇿 – Czech – Sněhová vločka 25x jinak. Verze s háčky na zavešení zde .…
This time, I’ve prepared a tree kit. Each tier is based on the design of my previous snowflake model , so it is again compatible with yout brick system or similar building systems. I managed to calibrate my own printer better, and now the…
Your favorite fractal sculpture! now halved, with a long flat base so it can be a bookend! Please consider supporting my hobby. You will make my day! (excuse my sloppy Photoshop, I haven't been able to print it yet) This was generated to…
🇬🇧 – English – A collection of 34 snowflakes for decoration purposes, with a silhouette design. The same snowflakes with hanging loops are here . 🇨🇿 – Czech – Sněhová vločka 34x jinak stylem “obrysová”. Stejné sněhové vločky s očkama na…
tree decoration skull snowflake
This cookie cutter is based on the fact that two different Koch snowflakes can tile the plane. This idea was suggested by @Daridam as an alternate use for the Koch Snowflake fidget . You need to print 5 (or 6 depending on your slicer)…
Update: I have added a new 1.5 version of the model (scad, stl, and gcode files). I redesigned the base part and I believe it works better in every way. This ornament prints flat in a snowflake-ish shape, and can be hung up as a…
UPDATE (Nov 2025): Based on user feedback, the tight tolerance cards and parts have been tweaked to add more clearance between parts for easier assembly. UPDATE: Trying to simplify a little bit, so the version of each file with slightly…
Please consider supporting my hobby. You will make my day! Or just print this out and share your make. I appreciate your support! If you are looking for the pyramid, I moved all those models to their own page. You can find it here.…
A collection of 34 snowflakes with hanging loops for decoration purposes, a bit thick ones. They are all around 5 cm big. More 5 cm designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake…
Snowflake Star Wars X-Wing Kit Card This is the perfect companion for the Snowflake TIE Fighter Snowflake Themed Star Wars X Wing Kit Card can be used as a Christmas Tree ornament or as a last minute present. This Kit Card is based on the…
Print twice and slide together.
I have created simple snowflakes for Christmas Tree decoration. Each snowflake is around 5 cm diameter. Easy print. Check out my entire Christmas decorations collection: https://www.printables.com/@miglo/collections/1855906 If you dowload…
Extruded fractal flake prototype. A predecessor to the fractal flake vase I made some years ago. The basic shape and parametric model is almost the same: A variation of the Koch-curve with hexagons, which changes in rotation and…
This is a collection of simple to print 3D Christmas ornaments , including snowflakes, stars, bells, trees and many more. The set contains over 15 original designs created by me in Blender to ensure clean proportions, sharp details and…
Diametre 9 cm - Epaisseur 2 mm / Diameter 9 cm - Thickness 2 mm Pack N° 1 Pack N° 2 Pack N° 4 Pack N° 5 Pack N° 6 Tout Noel JT3D - All Christmas JT3D
Just in time for the Christmas season, version 3 of the popular Christmas tree is now available. The "branches" of this Christmas tree are made of snowflakes. There are 15 layers of snowflakes of different sizes that are joined together.…
Simple snowflake Christmas bauble to go on the tree. Slots together, no need for glue You can hang it using string or print out the hook It is 6cm tall and can be printed with no supports You can find the display tree on my profile page…
18 Snowflakes with approx. 50 x 50 x 2 mm for Christmas decoration. Put your favorite snow flakes on your window, gifts or decorate your Christmas table. 09.12.2025: Added two more snowflakes See also my original snowflake collection with…
Just a rudimentary, stylized snowflake made to resemble a circuit board for the technology-minded among us to integrate into our winter holiday. Designed to be hung from a tree, with the option to hang it from any of the six points to…
Snowflake Candle Holder CANDLE HOLDER: 87,39x6,91x100,87mm CANDLE COVER1: 68,53x40,1x68,57mm CANDLE COVER2: 67,13x56,95x67,16mm CANDLE COVER3: 69,13x58,65x69,16mm CANDLE RADIUS: 20mm
This little Christmas ornament is perfect for your window or your christmas tree. It's easy and fast to print. Feel free to share your experiences with the community. Design by protechnordic, found on Thingiverse here:…
Celebrate winter with this detailed snowflake collection designed for both display and decorating. The set includes a large wall version, a small wall version, and a dedicated ornament version with a built in ring for hanging. The wall…
A minimal snowflake design shaped around candlelight. Designed for standard tealight and LED candles. Print Settings: Layer height: 0.16-20 mm Infill: 15% Optional: You can print upside down with supports for a textured top surface. Want…
a christmas kitcard of a tie fighter
A collection of 23 snowflakes with hanging loops for decoration purposes, 7-9 centimeters big. The same snowflakes without hanging loops are here . More big designs ↑ Link: 26 Big Snowflakes collection Smaller, 5 cm, designs ↑ Link: 34…
The base mesh is done with the Snowflake Machine: http://www.thingiverse.com/thing:1159436 I optimized the mesh for printing with 0.35mm layer height and fast printig by keeping the ice plates only 2 layers height, this also adds too the…
Some add-on “chill” for your Lego Wreath. With several different snowflake models to choose from, how will your wreath turn out… only time and filament will tell!! I scaled my wreath to 125% Here is a link to the download of the wreath.…
It's a pastry cutter. It's very simple. Height is 5.7 cm, width 6.2 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
For those who have been waiting. Here it is! First set of Snowflakes for Christmas 2025! ❄ Set of 12 Unique Snowflakes – Ready for 3D Printing! ❄ Create a magical winter atmosphere with this collection of elegant, detailed snowflakes…
Spinning snowflake and star When printed at full scale, the two inner stars are able to rotate freely. At about 70% scale (depending of course on the printer) the tolerances become such that the inner stars can rotate but need a tiny bit…
A collection of 25 small snowflakes for decoration purposes. A version without hooks is here Mini snowflake collection More smaller designs ↑ Link: 30 Small snowflake collection Slightly bigger, 5 cm, designs ↑ Link: 34 Snowflake…
Just a simple snowflake for downloading and modifying and decorations.
I have created second set of 12 simple snowflakes for Christmas Tree decoration. Each snowflake is around 6 cm diameter. Easy print. Here you can find my previous set:…
christmas Snowflake size 150x170x5mm Print instructions printed on Prusa MK3 material PLA detail 0,2mm
The cookie cutter is composed of two parts for easier removal from the dough. There are small locks on each part, to ensure perfect fit.
Diametre 9 cm - Epaisseur 2 mm / Diameter 9 cm - Thickness 2 mm Pack N°1 Pack N° 3 Pack N° 4 Pack N° 5 Pack N° 6 Tout Noel JT3D - All Christmas JT3D
A collection of 26 snowflakes with hanging loops for decoration purposes, all about 9 centimeters big. More big designs ↑ Link: big 23 Snowflakes Smaller, 5 cm, designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34 Snowflake…
I have created fourth set of 12 simple snowflakes for Christmas Tree decoration. Each snowflake is around 5 cm diameter. Easy print. Check out my entire Christmas decorations collection:…
Christmas snowflake ornament. Easy print. No supports. Includes .f3d file. Print instructions Category: Decor Summary Christmas snowflake ornament. Easy print. No supports. Includes .f3d file.
Change the plastic after a pause or with the help of a plug-in in the slicer.
Print at about 0.2mm layer height PLA recommended, PETG works fine too but the stringing might be more noticable If you experience issues that the hanger-ring is lost during slicing, activate “Detect thin walls” in “Print Settings” -…
EDIT 1: Through gradual testing, I found that on my FDM printer the outer perimeter tends to be slightly smaller. So, I created a version scaled to 1.06 ( and 1.08), which works well for me while maintaining the correct spacing between…
For complete earrings, you need two printed earrings (very easily printable and without support), two earring hooks , and two rings . T-shirt Support me & Buy a T-shirt A snowflake is either a single ice crystal or an aggregation of ice…
I was experimenting with snowflakes in spiralized vase mode and came up with this flexible snowflake fidget. One surprising feature is that the fidget can be inverted to make a different interesting snowflake. It is printed with Prusament…
A frosted flake for every cup. Two manual swaps — no AMS or MMU required. Print Settings: Layer height: 0.08 mm with a base layer of 0.16mm Infill: 100% Color Changes: Start with Blue (Sunlu PLA Blue) At layer #19 (1.60 mm), swap to Light…
I designed a spinning ornament/decoration to be printed in place, no supports or rafts needed. After the print, simply cut away the small tabs (marked in purple) holding the spacers to the stars with a blade, and it should free with a…
❄ Design Concept Bring winter magic to your table with this Snowflake Coaster! ❄ Its delicate snowflake shape and clean geometric design capture the frosty beauty of winter while keeping your surfaces safe. Both practical and decorative,…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Set of 8 cute 3D printed Christmas ornaments — snowflake, star, deer, bird, ball and tree designs. Quick 30-minute prints, perfect for your Christmas tree or holiday gifts. size : 130X90X1mm files : 8 total print time : 30m~40m raft : no…
Hey everyone! 🎄✨ We’re excited to introduce one of our most successful models – a collection of 10 snowflakes with a hanging loop! ❄🥳 This set is perfect for quick and easy decorating, bringing the magic of Christmas into your home. Each…
Print two snowflakes and one holder and slide together. Holds together without glue.
A stencil for christmas coffee How to use it To begin, hold the coffee stencil over the top of the cup of coffee or espresso. Using the small spoon or scoop, sprinkle a thin layer of ground cinnamon or other spices over the open areas of…
Do you want to decorate your christmas tree with beautiful snowflakes then these are perfect for you. If you like it I would appreciate it if you give it a like. when you have printed it make sure you put a photo in "make". do you have…
Designed with Illustrator and Rhino. Reported, but the original model was shared on 2022-12-4. Before this upload! https://www.printables.com/model/332036-snowflake-ornament-merry-christmas
Originally this shape was designed as a lamp shade for a chandelier. It derives from a fractal 2D-shape similar to the Koch-curve (using hexagons instead). The 2D-shape is varied along the extrusion path in rotation, size and…
A collection of 34 snowflakes for decoration purposes, a bit thin ones. They are all around 5 cm big. They are also the same snowflakes without hanging loops here . More 5 cm designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34…
Inspired by fixumdude’s Snowflake Tie Fighter , I downloaded Maxime’s Millennium Falcon model on GrabCAD, modified and redesigned it for better printability and added a snowflake cutout, using a snowflake design from Lia Aramburu . If you…
A collection of 34 snowflakes with hanging loops for decoration purposes, with a silhouette design. The same snowflakes without hanging loops are here . More 5 cm designs ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake collection ↑…
Take the 0,3mm draft layer standard setting. Then you get a nice glitter effect and printing time of 16 minutes. I prefer the transparent PETG. Its also nice to add a color layer in the print ( see Prusa Blog ) . There is a small hole at…
Pendants Snow Flakes for your Xmas Tree
Detailed miniature Grinch Christmas village scene . It's the perfect festive print for decorating your tree, gifting, or adding a touch of winter magic to your home.
18 detailed snowflake ornaments with small top hanger loop for easy hanging on your Christmas tree.
two-piece snowflake - 3D from 3D :-)
Diamètre 9 cm - Epaisseur 2 mm / Diameter 9 cm - Thickness 2 mm Pack N° 2 Pack N° 3 Pack N° 4 Pack N° 5 Pack N° 6 Tout Noel JT3D - All Christmas JT3D
An intricate snowflake ornament. Prints with a built-in hole for wire or string to hang.
change the color of the filament at 5 mm to accentuate the snowflake inlay. check out my other christmas designs: SNOWFLAKE ORNAMENTS MERRY CHRISTMAS FRÖHLICHE WEIHNACHTEN COLLECTION GNOME ORNAMENTS 2 GNOME DEER
Choose side between X-Wing and TIE Fighter in battle for christmas tree! This model is direct response to awesome Fixumdude Snowflake TIE Fighter Kit Card Ornament. X-Wing model is balanced, have same awesome snowflake ornaments and every…
Check the profile to download the full set. Subscribe to not miss out the next one!
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
For complete earrings, you need two printed earrings (very easily printable and without support), two earring hooks , and two rings . T-shirt Support me & Buy a T-shirt A snowflake is either a single ice crystal or an aggregation of ice…
I was having a bit of trouble finding snowflake studs for @MagnumDanger's giant LEGO holiday wreath that were quick and simple to print. I found this cute little snowflake and it worked out well as a stud. Thank you @Vaclav_Sprinters for…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
https://www.buymeacoffee.com/adamca.lab Check the profile to download the full set. Subscribe to not miss out the next one!
A collection of 34 snowflakes with hanging loops for decoration purposes, a bit thick ones. They are all around 5 cm big. More 5 cm designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake…
For 1 snowflake you'll need to print the following: - 1 base part - 1 long part - 4 short pieces Simply slide them together, no gluing is required. .3mf file included with all pieces you need already arranged and ready to print (for 25 x…
Christmas Snowflake, 80mm tall and wide. Simple assebly by sliding two flakes into eachother. If you want to support me or get commercial licenses you can join a patreon membership: https://www.patreon.com/SabreDesign
Set of 4 snowflakes decoration. Can be used as Christmas tree decoration (using models with hole), or decorations for home (using models with or without hole). Printing on 100% has height around 9cm. Recommended print settings: 2-3…
Best looking in clear or glow in the dark material. If you print with Glow in the dark PLA, set first layer nozzle temperature to 220°C, otherwise it has problems with sticking.
This elegant Snowflake Christmas Ornament features a beautifully detailed relief pattern of winter snowflakes. The pure white matte finish gives the ornament a sophisticated, frosty look that complements any holiday theme — from minimal…
The wait is over — the Second Snowflake Set for Christmas 2025 has arrived! ❄ 12 Fresh, Original Snowflakes — Ready for Instant 3D Printing ❄ This new collection brings a clean, modern twist to classic winter ornaments. Each snowflake has…
Add a touch of winter elegance to your jewelry collection with these stunning 3D printed Snowflake Earrings. Crafted with intricate detail, these earrings capture the beauty of snowflakes, making them perfect for the holiday season or as…
Use a food safe filament. I find a thorough flouring of the cutter works better than greasing for easy release, but experiment.
This is the second design in my #flatpackchristmas collection! For this ornament, I went with a snowflake since it doesn't actually snow where I live lol I love Christmas, but ornaments can be really hard to send or store. These flatpack…
Snowflake stencils for the perfect christmas view from the window. Use snow in spray can, apply a thin layer, clean the stencil with water or a dry cloth & repeat for many many snowflakes on your window. No need to use paper stencils…
Set of 5 snowflakes, can be used as coasters, Christmas tree ornaments etc.
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Here's a slightly different version of the Snowflake Fidget Spinner (Classic) , engraved with a delicate line on each branch, both at the top and bottom. This subtle detail adds a touch of sophistication to the design of the spinner,…
