53 modeli
This 3D model represents the Green Fluorescent Protein (GFP). GFP is widely used as a fluorescent marker in biological and biochemical research. This model is intended for educational, decoration, and molecular visualization purposes.…
Studenti vytvoří komory pro funkční modely spektrofotometru a fluorimetru, které je možné ve spojení se senzory chytrých telefonů využít k měření intenzity zabarvení a fluorescence kapalných vzorků.
This is a tube rack for holding Qubit tubes, meant to increase your pipetting efficiency by 4x. Each section is spaced so that you can use an 8-tip multichannel pipette to add reagent and samples 4 at a time, making your life 4x easier…
This is a little add-on for your halloween pumpkin tealight or any other tealight. Since I had fluorescent glow in the dark filament lying around, I came up with the idea of creating an insert with the glowing filament instead of using a…
Desk lights are fine and convenient, but overhead lighting is better, both for reducing eyestrain and to reduce shadowing (imo). This is a pair of LED light mounts that fit over the end of any 16mm thick shelf (as pictured). In this…
aquarium fluorescent lamp holder - akvárko držák zářivky
A hollow model of the nematode, C. elegans. Entry for the “Worm Art Show” at the 2023 International Worm Meeting in Glasgow, Scotland! •This model does require some glueing. It will likely need supports on the inside in various places.…
This is a solution for making stands for a fluorescent rock display case. Most fluorescent rock displays use shelves stepped like a staircase. This design uses PVC pipe as risers for individual rocks so you can individually adjust their…
Some kitchens, like mine, have a fluorescent tube hanging under the kitchen cupboards. In my case the end cap had broken off. This endcap snaps in place and essentially bends the electrical contacts so they are in contact with the tube.…
This was migrated from my Thingiverse profile and is from 2015. A contraption which fits around a standard 1x1 cm (internal) pathlength UV/vis or fluorimeter cuvette. Four LEDs fit around the sides allowing the sample to be irradiated…
I increased the diameter of the gripper
Fantasmita impreso en filamento que brilla en la oscuridad
This is a mod of a lanlan brand master skewb. In order to make this you will need to get one of them. You will also need some superglue to attach the pieces. If oriented correctly none of the pieces should need supports. If you would like…
I needed something to attach a fluorescent tube to the wall because it was just standing on the ground against the wall for years taking up space. I designed these two holders for it finally. Screw holes are 4mm the holes for the tube…
Mount for ZWO EAF (electronic auto focuser) onto WIlliam Optics Fluorostar 91
I made this simple stand for fluorescent light tubes for my desk, since it was blinding sitting on the bottom. It is made of PLA on 0,3mm layer height, with hollow insides and lightning support, but I would highly suggest making the base…
Printed in Colorfabb Glowfill PLA.
This one was inspired by the crystal form of Fluorite.
⚠ DISCLAIMER ⚠ Let me begin by saying that you need to be extremely careful when installing and using this junction box. It is made from material not deemed electrically safe, and you are working with high voltage that could be lethal.…
Multiple iterations to get the size and fit correct. This will also accept Hg lamp filters. This part is subject to extreme heat and will not be able to be used with most thermoplastics. The holes on the lamp side are for fitting threaded…
Compact glow‑in‑the‑dark EDC keychain tag for quickly spotting your keys at night multiple variants. Version 1 with a subtle textured surface created using bumpmesh . Designed for clean edges, even glow, and reliable everyday use.…
3D printable fluorescence photobox based on the research “Lighting Up for Learning─Fluorescence Analysis of Microplastic Particles by Secondary School Students Using Nile Red” from the Journal of Chemical Education - ACS Publications.…
Designed in the size of a standard microscopy slide. Side channel in each vat was designed for air bubble removal and dye solution top up. For use with 17x17 mm cover glass. Recommended printing material: Black PETG.
A bracket made for my local library to replace a broken one. It fits two fluorescent bulb sockets and one starter socket and has appropriate mounting point for the lamp housing.
This is a replacement part for the latches used on fluorescent vaporproof / vaportight fixtures. The swim club that I belong to uses these fixtures in the locker rooms, and this is the part which seems to break most readily. Replacement…
Adjust the measurements and resize or warp this thing as you like in the slicer of your choice. It's basically just a ring, but modeling it in PrusaSlicer alone was too much of a hassle for me. Anyways, I've included the model file for…
A molecular ball-and-stick model of the fluorescein molecule, created using its crystal structure, Blender, and the molecular nodes plugin (by Brady Johnston). For printing this model in PLA with 0.4 mm nozzle, I recommend the following…
I must change the fluorescent tube inside the bath mirror cabinet and it was very hard to rotate the tube to remove and install the new one. With this small developed part it was very easy to rotate the tube. Printed with TPU, 0,3mm LH,…
modello semplice di portachiavi…composto da 2 colori nero pla per la base e pla fluo per il lato e la scritta
This is the experimental determined iso electron-density surface at 0.1 and 0.5 electrons per cubic Angstroms of a fluorinated Fullerene C60F18 see: "Bond Orders and Atomic Properties of the Highly Deformed Halogenated Fullerenes C60F18…
A display for a complete set of rare earth oxides and fluorides, including Scandium and Yttrium. Holes sized to hole 1 dram sample bottles (15 x 45 mm). This was designed specifically for my workplace. However, maybe some useful for other…
Use carbon fiber composite filament such as XT-CF20.
Clip for fluorescent tube after the metal clips were quite expensive. Donations through Paypal
This is ch. perfluorooctanesulfonic acid , the seventh and final work in the series Toxic Poetry — a set of sculptures based on molecules that are as beautiful as they are carcinogenic. These sculptures are based on ball-and-stick…
Simple adjustable dimension bracket to secure fluorescent lamp to terrarium lid. Uses M3 screws.
This is a Fluorescent light bar mount for ceiling mount or for standoff mounting to ceiling. I could not find a suitable mount anywhere just to print, so I designed my own. I recommend PETG as it works better in higher temperatures and I…
Needed a way to hold up a card or recipe page in the kitchen - realized that my fluorescent lights are capable of holding a light object, so here it is! The clamp bit has a 1/16" piece of rubber (from an old mousepad) glued in the space,…
this is my first model, so be kind :) this model is intended to slide over the light fixture for a fluorescent lamp (e.g. https://www.bunnings.com.au/nelson-t5-fluorescent-2-x-18w-cool-white-slimline-fluorescent-fixture_p4344802 but much…
Hi, this is fixing clip for Massive 21w fluorecent lamp. Print Settings Printer: CTC Rafts: No **Supports:** No Resolution: 0,1 **Infill:** 100% Category: Replacement Parts
A set of parts that can be used to convert and rewire fluorescent ring lamps to LED. These specific parts are sized for converting a ~1960's Gruber magnifying lamp—which uses a Philips TL-E fluorescent bulb—to an LED lamp, using Integral…
Repurposing old Aquarium equipment, because these bulbs are kind of outdated I couldn't find a ballasting unit that shades from either side in my area I made this canopy to fit 8mm Aluminum Rods that are secured by an M5, and an M4 bolt…
Clip que se suele perder o romper para cerrar pantalla estanca
2-Bromo-5-fluorobenzamide (C7H5BrFNO, CAS 1006-34-4) — a free educational 3D molecular model for teachers and students, by MolGod.org. Element symbols are cut into each atom sphere: a self-labelled teaching aid. Let the group sketch what…
An affordable, open-source LED Fluorometer for chemistry labs. Designed in collaboration with the Chemistry Department at Penn State. The plan was to provide a low-cost, hands-on DIY educational instrument replacing commercial equipment…
Printed with PETG, could propably work with other filaments. It works well, but it's a little flimsy because it has to be thin to fit
Perfluorooctanesulfonic acid (C8HF17O3S, CAS 1763-23-1) — a free educational 3D molecular model for teachers and students, by MolGod.org. Instead of colour coding, every sphere carries its engraved element symbol. An acyclic molecule to…
Loosely based off the Siemens ARTIS Pheno, this is a scale model that can extend back and forth. I was informed that the "C" part is actually supposed to swivel on multiple axes, but we'll see if I get around to making another version…
4-Fluoro-1,3-dihydroxybenzene (C6H5FO2, CAS 103068-41-3) — a free educational 3D molecular model for teachers and students, by MolGod.org. Each atom is labelled with its own engraved element symbol: no colour chart needed. A one-colour…
Simple adjustable dimension bracket to secure fluorescent lamp to terrarium lid. Uses M3 screws.
Repurposing old Aquarium equipment, because these bulbs are kind of outdated I couldn't find a ballasting unit that shades from either side in my area I made this canopy to fit 8mm Aluminum Rods that are secured by an M5, and an M4 bolt…
A multi-material utilizing model to make Fai D. Fluorite's staff from CLAMP's Tsubasa: Reservoir Chronicle series. CenterCrystal x 1 StaffCenter1 x 1 StaffCenter2 x 1 StaffWingA x 4 (mirror 2) StaffWingB x 4 (mirror 2) StaffWingC x 4…
