Wyniki wyszukiwania: g15

SSD M.2 Hard Drive Mounting Support Bracket for Dell G15 5510 5511 5515

M.2 SSD mounting plate for DELL laptops.

DC adapter plug power cord support for Dell G15 laptop

After a short time using the Dell G15 laptop, I noticed the power adapter plug was getting to be rather wobbly in the port and would frequently be pulled loose by accident. This support clip attaches to the back of the laptop over the…

Dell Laptop Stand 30° Angle - Dell G15 or others

Laptop stand with 30° angle to make it better for neck ergonomic. Designed for Dell G15 laptop but able to use but it can be used on many other models. Very versatile. Design made on OnShape. Feel free to check it and modify it:…

Dell G15 SSD 2280 Mounting Bracket

Design Log: I changed the thickness of the piece. Did a thicker base for vertical printing. Minor adjustments for better aesthetic. I printed with PETG (Grey Overture) in a vertical position with supports.

Logitech G15 V2 Keyboard Clip

Right and Left Clip for Logitech G15 Keyboard V2

Ibanez RG1570 Prestige (2007) back-plate

Back-plate for a 2007 Ibanez RG1570 Prestige. Might work on other RGs and/or other years. Not sure. Designed at 138.85mm x 85.7mm dimensions. My original back-plate has been falling apart over the years, mostly breaking around the screw…

Strainer for roof gutter RG150

Part is printed with PETG and do not need supports.

Logitech G15 Standfuß

Ist ein Ersatzteil Der ausklappbare Fuß der Tastatur

ROG ZEPHYRUS G15 M16 LAPTOP RISER

EN: LAPTOP RISER FOR ROG ZEPHYRUS G15 M16.TEST IN PROGRESS.A cool laptop riser for ROG ZEPHYRUS G15/M16 THE 2021 or later SKUs. Print it to get better thermal performance,better input experience now! 中文： 为ROG 幻 15，幻…

G15 Keyboard standing legs

this is my first project. i drew and edited this myself. I hope it helps you as much as it helps me. The print file is the leg for the left side, you have to insert it twice into the slicer and mirror one of them

Laptop stand for Asus zephyrus G15

Same as the version for G14 but compatible with G15 (or possibly any laptop with the similar proportions). I decided to print the stand 20mm thick for more robustness so i added modified version of the connector. Since making the stand…

Mig15 model

My attempt at making a MIG15 model for 3D printing.

dust cap linear rail hg15

caps to go over the screws on a hg15 linear rail to hopefully keep dust out of the bearings

DELL G15 laptop stand

0.28 mm layer height. 20% infill. No supports required. PLA or PETG.

Asus Zephyrus G15 2021 Power Brick Under Desk Mount

Screws are used to mount it under a desk. Cables connected on both sides slide in easily. Neatens up my desk a little, and is easy to pop out for travel. Suitable for Asus 200w AC Adaptor Part ADP-200JB D The dimensions of the power brick…

Dell-g15

Laptop camera cover

Dell G15 stand

Dell G15 laptop stand.

G15 foot

KeyBoard Food

Space-Saving CG1500 Lid Power Supply Mount

I tried out this great design from Ernie34 at https://www.thingiverse.com/thing:2656493 and found that I didn't have quite enough room for my electronics in the other side of the enclosure (The Kulp K8-B is fairly tall). This design had…

Dell G15 laptop stand

A quite simple but very helpful 3D model for those who want to place their laptops vertically and stably. The model is designed for the Dell G15 but may fit many others and is easy to modify (just one sketch in FreeCAD). I hope my model…

Shelf for UPS CyberPower BRG1500AVRLCD (with Fusion 360 export)

I wanted a shelf to put atop my CyberPower BRG1500AVRLCD UPS so drew one up in Fusion 360 and printed it out. Print parts in the orientation provided - you will one to print two or three of the legs stl. I suggest you use supports on the…

Flacon Smart Receiver Mount for CG1500

I use 4 M3x8mm bolts for the Falcan Smart Receiver and 5 #6 1/2 screws for the CG1500. The mount can be placed either left, right or centrally at the bottom of the CG1500, you could install 2 of them in the left and right positions if you…

Advatek PixLite 4 MkII CG1500 Mount

This is a simple mount for a Advatek Lighting PixLite MK2 board for a CableGuard CG1500. To connect the PCB to the mounting plate you will need 4 machine screws and nuts. The holes on the mounting plate are 3.5mm in diameter, slightly…

laptop riser for rog g15

it lifts the back end up for smother air flow

Klarus G15 flashlight diffusor

A slim diffusor for the Klarus G15 flashlight. Use a transparent PLA. I also tried with black PLA on the bottom part, I thought it looks better, but does not affect the functionality. .20 layer height and supports is recommended, rounded…

Bergmann MG15 barrel for nerf lug

should work with any nerf blaster with an n-strike barrel lug, but since this is a purely cosmetic attachment, will only hurt performance. Instructions: (reamended) print section 1 as one piece, and section 2 as one piece, and then glue…

HSK-E 40 PG10 PG15 Gridfinity Storage solution

Klarus G15 button protection

A simple clip-on protection for the Klarus G15 flashlight to prevent pressing the button when the flashlight is in a pocket or a bag.

Meg Head Can (fits Meg15 and Tiburon)

Durable canister to protect Meg15 closed circuit rebreather head while in transit. Also provides easy calibration. This model is not intended to hold any over-pressure whatsoever. It is designed specifically to leak and maintain ambient…

Adapter plug power cord support for Dell G15 5530 laptop

Looks like my laptop is newer than the one in the original model, and yet the same problem persists. I couldn't get the laptop power adapter to stay in place in the back of my Dell G15 5530 so I went wandering the internet to find a…

G15 Keyboard Flipout Feet

This is my first design and print of a practical application. (2017) NOTE: The Parts are universal for right or left and can just be flipped over after printing. Printer Wanhao I3 Plus Designed in: Fusion 360 (included file here) Sliced…

Makra KEG150 Chip container with extraction connection

Printed in ASA with 4 wall lines and support

ROG STRIX G15 Keyboard standoff

ROG STRIX G15 Laptop support is built into the model just twist it off or clip it off with flush cutters I don't know if this works for any other laptops, might fit any other laptop that is 18.2 mm wide on the base I use a standard size…

FPP BBB16v2 CG1500 Mounts

FPP PB16 mounts for the CG1500. Use #6 ½" sheet metal screws. Attach the brackets with 1/2" screws to the CG1500. Two Screws at the bottom and 1 or 2 at the top. Then attach the BBB16v2 with 3 or 4 1/2" screws.

Sandevice E682 CG1500 Mounts

Sandevice E682 mounts for the CG1500. Print 2 and use #6 1/2" and #6 3/4" sheet metal screws. Use the 3/4" screws for the top holes and screw through the Controller and mount, into the case standoffs. Use 1/2" screws for all the other…

RG15 Airfoil Wing Wall Mount Cradle

Designed around the SoarKraft Pika with 1.2M RG15 wing, these mounts were created to secure the model to the wall, freeing up precious space in the workshop! The brackets are designed around the RG15 airfoil, ensuring the wing is securely…

Blinkleuchte DDR Ruhla E15 G15008

am besten mit Transparenten Material drucken

AtomRC Seal G1500 Wing Twin Motor conversion

This is twin motor conversion of AtomRC Seal G1500 More power, easier takeoff and more efficiency! There you can find an aerodynamic placeholder for the old motor mount, motor frame, motor plate and a decorative cover for the ESC. There…

Logitech G15 Leg

Needed a leg that was a little bit longer to better prop up the keyboard for gaming. So I made these legs. They are 33mm long and give the keyboard a better angle

Dell G15 Nvme Adapter

Fits our Dell G15 5511. This may fit other Dell Laptops as well. Category: Computer

Blinkleuchte DDR Ruhla E15 G15008

am besten mit Transparenten Material drucken

Meg Head Can (fits Meg15 and Tiburon)

Durable canister to protect Meg15 closed circuit rebreather head while in transit. Also provides easy calibration. This model is not intended to hold any over-pressure whatsoever. It is designed specifically to leak and maintain ambient…

Flacon Smart Receiver Mount for CG1500

I use 4 M3x8mm bolts for the Falcan Smart Receiver and 5 #6 1/2 screws for the CG1500. The mount can be placed either left, right or centrally at the bottom of the CG1500, you could install 2 of them in the left and right positions if you…

SG15 U-groove wheel (625 bearings)

A lot of new budget 3D-printers are using SG15 metal wheel bearings instead of POM wheels, as they can run along 6mm rods nestled inside the grooves of a 2020 extrusion, meaning printer manufacturers can retrofit designs based around POM…

Sdg15

Great

Meanwell CG1500 Door Mount

Meanwell mount for CG1500 Door. Print two per case. Use M4 machine screws to attach the mount to the power supply and #6 1/2" sheet metal screws to attach the mount to the CG1500. Category: Electronics

FPP PB16 CG1500 Mounts

FPP PB16 mounts for the CG1500. Print 2 and use #6 1/2" and #6 3/4" sheet metal screws. Use the 3/4" screws for the top holes and screw through the Controller and mount, into the case standoffs. Use 1/2" screws for all the other holes.…

Dump Falcon Receiver CG1500 Mount

Dump Falcon Receiver CG1500 Mount. Use #6 1/2" and #6 3/4" sheet metal screws. Category: DIY

Dual Meanwell mount for CG1500 enclosure

This is a mount for 2 powersupplies inside a CG1500 enclosure. Can be printed on a Prusa Mini. Also working and will upload a cover bracket so you can mount electronics above the supplies as well. Suggest printing in PETG for stability…

Raspberry Pi Mounting Plate to CG1500

I build many outdoor enclosures for Christmas LED light shows that use a Raspberry Pi to run the show. This is a simple little mount allowing the use of any of the mounting points inside of a standard CG1500 box to mount the Raspberry Pi.…

K8-B CG1500 Mounting Plate

This is a mounting plate for the Kulp Lights K8-B with hole spacing in the plate, designed to mount into a CableGuard CG1500 enclosure. There are 4 variations of the file depending on what you need: Internal_Holes: Mounting holes are…