Liczymy pasujące modele…
I merged together the official g502 plate model and a nice finger rest I saw on here but didn't like it going behind the mouse. I also added a little slot for 5,2mm radius magnets. It's a bit tricky to mount it but it's worth it
Public domain model of a Logitech G502 gaming mouse by heraSK . Originally uploaded to Blend Swap .
I saw some of the other charging docks on here for my mouse. But none of them fit what I was looking for so I decided to make my own. Mad props to Spotech though for posted the wiring for the mouse though and saving me time.…
This is the base I have made as a replacement for the G502 Lightspeed. I had to replace the switches on my G502 so I took the opportunity to replace the base with a lightened one. The new base weighs in at 7g compared to the original 23.…
Remix supports the wired version of the mouse, slides over the strain relief and fits snug. Like with the original can add some mouse feet or as I did 2 layers of electrical tape which works much the same.
I made the 3D printed base for the Logitech G502 X LIGHTSPEED. The charging terminals and the receiver/dongle storage were removed. It fits without the modifitions to the original mouse. Maybe some light touchups will be needed on the 3D…
Modified from an existing design, fits with a 5mm x 3mm circular magnet. Glue needed by the way if you want the magnet to not fall off whenever you take finger rest off, since I made the hole to be 5.5mm wide. If you'd like it to fit with…
stand for the logitech g502 lightspeed and hero. Requires 2 1.1mm neodymium magnets.
Have you ever wanted to be able to make your Logitech G502X Dongle not fall off the table when using the extender? Then this is the print for you. Printer settings: - 0.20 mm layers - 15% Grid infill - Print with supports! I used regular…
Gridfinity storage for Logitech G502 X mouse with the slots to put in the extras, USB dongle, weight and the adapter
The main reason i decided to create something like this is thanks to an issue on a mouse click and due to the old battery that needed to be replaced, so why not creating a super lightweight mod? I also made a lighweight Chassis for the…
Added space for a 6*3mm magnet, print at 1.2 and 15% infill, no glue just push fit All credit to fe|ix for modeling the baseplate all i did was add a hole :)
Magnet diameter is 6mm Print without supports Reducing the flap height might further improve it
I love this modular case design and use it for lots of things. Recently upgraded my mouse and figured I'd make a case for it since I travel daily with it. The inserts are TPU and printed in gyroid infill (5-10%), with 0 top surfaces so…
Charging stand for Logitech G502 Lightspeed, should work with other powerplay compatible mice. I found the USB cable on my G502 a bit awkward, the port is too recessed and it's tricky to remove without pressing buttons. So I designed a…
Just a simple replacement for the mouse skates of the Logitech G502 X.
You need: 4x M3 brass thread inserts 4x M3x10 countersunk screws, holes are deeper and longer screws can also be used Printed mine in XPETG by extrudr. 0,15mm layer height for mount, 0,2mm layer height for clip Remixed one file I found on…
If your Logitech G502 LIGHTSPEED cable disconnects easily after bumps or shocks — especially when the micro USB end has become loose or damaged — this simple, robust part fixes the issue. The protector firmly holds the male micro USB…
Both are good mods, but there are something missing on each, so I mashed both together. My finger is slightly longer; my pinky drags on the surface. I printed this on a textured pei sheet, it works ok on my desk mat, didn't catch any of…
Inspired by the Zeromouse from optimum, it weighs around 30-33 grams fully assembled and comes together in mere minutes, just 25% of the mass of the original G502 Hero. It takes 9 screws from the original body and has 4 clickable…
Inspired by the Zeromouse from optimum, it weighs around 30-33 grams fully assembled and comes together in mere minutes, just 25% of the mass of the original G502 Hero. It takes 9 screws from the original body and has 4 clickable…
Okay… so one day I noticed my G502X Lightspeeds Mouse wheel wasnt turning properly. It felt as if on one side the rubber was hitting something… But what really happened is: The rubber on the scroll wheel began to stretch as it dissolved……
Give your Logitech G502 Lightspeed the charging throne it deserves! 🐼⚡ PandaDock is a custom-designed vertical stand that transforms the IKEA LIVBOJ Wireless Charger into a sleek Qi charging dock for the Logitech G502 Lightspeed. (It will…
Hold your Logitech G502 X on your HSW! You'll need 4 6x2.1mm magnets (same ones used in Gridfinity). There are 2 models. One to hold the mouse up (or down) and one to hold it sideways both of them with and without the G logo. Slicing &…
Wasn't quite satisfied with the original flat version, so I made it curved; then I find the top corner uncomfortable, so I rotated the angles of lever end as well. Made 20 & 25mm versions, you don't want it to be too short since you're…
I merged together the official g502 plate model and a nice finger rest I saw on here but didn't like it going behind the mouse. I also added a little slot for 5,2mm radius magnets. It's a bit tricky to mount it but it's worth it
A bottom cover for the Logitech G502 Hero / Proteus Spectrum with integrated, very large pinky rest. I enlarged the area, because of my large fingers.
You will need: QI disk QI coil 1x M2 heat insert 3.2mm x 4mm 1x M2 x 8mm Note: The disk and the stopper are connected with some filament The bottom and the lid are just pressfit Only the lid needs supports on build platte, the rest can be…
Split into objects (Disable auto-drop when prompted) Assemble the puck and place it face down. Assemble the dock and place it face down. Change filament of the wanted parts. Print !
Works with the listed mice to reduce scroll wheel weight. Remove the inner plastic piece from the metal outer of the stock scroll wheel. Remount the inner plastic piece to the printed outer. Hyperscroll should still work, albeit not for…
I created this model because i did not want to have to have a micro USB cable just for charging my mouse, most other stuff i have is USB-C For the dock, you would need the following items: A USB cable (any old type A cable should work) 4…
I currently haven't printed this, however i have printed the version its remixed from Filled in the holes, and moved it so that it can take 2 small screws which should stick to the mouse's built in magnets and will also act as the…
I recommend printing this on glass with hairspray for an extra smooth finish. It is imperative to the proper function of the mouse that the bottom cover is smooth. I've spent a lot of time tweaking the dimensions to get something that…
Models These models are for the G502 Proteus Spectrum (model from 2017). There are many revisions of the G502 mouse that are very similar in design, so there's no guarantee that this model will be compatible with your G502 mouse.…
Esta es una sujeción para el cable que sale del USB del ratón Logitech G502
Thanks to phillip9933 on Reddit for the original design. Here's a link to that one: https://www.prusaprinters.org/prints/69954-logitech-g502-lightspeed-pinky-rest This is my remix of his pinky rest, extended for different grip types and…
This case has two options for storing the mouse. You can store the mouse with the cable wrapped up and contained within the case or you can have the wire outside the case as well. To support my projects and to get commercial use, use the…
So, you are like me and your Logitech G502 Hero and Lightspeed travels everywhere with you and you fear loosing the baseplate? Do not worry, luckily I still have mine and was able to model them, before they get lost. Now you can simply…
It was already a great design but made it a little better. ;) Maybe my hands are just large but my pinky, with the original design, kept dragging on the mouse mat. Made the pink rest larger and the small tabs that slide in the mouse…
Print however you want to, my settings were pla .4mm nozzle with .15 layer height. The circular hole is designed to accept a 6mmx2mm magnet glued in place(there is a magnet in the mouse so really any small piece of metal glued there…
I wasn't super happy with the options available so I just modeled my own. Forewarning, the thumb rest is pretty far forward, It fits my grip nicely. At the very least the skates, PCB and mounting locations are all accurate as a starting…
Simple Logitech G502 mouse pinky rest, no need to replace any original part. Simply attach it to the bottom mouse grooves with any mild adhesive, I used sticky putty, but double sided tape should work fine, the mouse and hand weight will…
This print was created using the Rugged Box (Parametric) design by @Whity (thank you!). Designed for the Logitech G502 Lightspeed Wireless Mouse and to be fitted with the molded cardboard insert from the original box's packaging (see…
Public domain model of a Logitech G502 gaming mouse by heraSK . Originally uploaded to Blend Swap .
I love Gridfinity, and I also love to maximize storage space. I am not generally happy with rectangular bins to store stuff. A cutout shape ensures the right item returns to the right spot in the drawer. In this case, I was able to angle…
Hardware needed: 2x M3 x 12mm pan head screws (they need to be magnetic)…
Minimal supports are required for the section that connects to the usb slot in front of the mouse. Recommended to add mouse feet/skates on the bottom of the rest.
Hi! so i was scared of losing the little switch and the dongle for my new mouse, so here is a box for it !
Hi! so i was scared of losing the little switch and the dongle for my new mouse, so here is a box for it !
BOM Baseus magsafe qi wireless charger x1 5Øx3 magnet x8 5mm spherical magnet x1 logitech third party wireless qi charging coin x1
