Liczymy pasujące modele…
Here you have another large 80cm filament print of a robot. This one is based on the Cylon character “Centurion” from the Battlestar Galactica movies and series aired in the 70ies & 80ies of the last century. The original 3D model was…
Don't you hate the way most coasters don't catch the condensation coming off your ice-cold drink? Well, this coaster is just what you need! A beautiful coaster that will protect your coffee-table or desk while you watch Battlestar…
I couldn't find a Battlestar Galactica model from the new series on Printables, so I thought I would bring them to you from Thingiverse. I printed this great model from EDY209 on Thingiverse a while back. I also used the fixed parts by…
I couldn't believe that I couldn't find a Cylon Raider from the original series (TOS) on Printables, so I had to add this one from newtrix on Thingiverse. His is a remix of Astrofossil's design also on Thingiverse. Newtrix split the…
Battlestar Galactica Colonial Raptor. I couldn't find any models out there, so I took one from the game Diaspora. I extracted the model from the game, chose the highest detail mesh, converted it to stl and fixed the surface problems in…
As a special request to Straeker. I did all that I could as far as my abilities go. I've split it up in such away that there should be no need for supports although there is a couple of pieces that will need a little. I saved all the…
I loved Battlestar Galactica as a kid and I found this cool model over at the STL Finder https://www.stlfinder.com/model/1970s-battlestar-galactica-cylon-centurian-helmet/5612916 I've modified it a little to best represent how I thought…
Cylon Raider : Battlestar Galactica 2004 Series bio-mechanical life form . While it resembles a sleek, "Cylon-head" shaped spacecraft, it actually possesses a biological brain, organs, and even blood, allowing it to "resurrect" into a new…
Al Mon has a beautiful Viper MkI on Printables with 45 files. It is an awesome model. But, not everyone wants to build with that many pieces. I couldn't find a simpler one here, so I uploaded DavidBogearts two piece model from…
Slowly getting back and tidyng up my original files, Cheers Jace
Here's my take on the original series Cylon centurion from Battle star. I't been split with Luban and the eye scanner piece goes from the inside and pushes out The mouth guard just glue in place I made the small holes in the forehead that…
Bring iconic sci-fi history to your workbench with this massive 20.5" x 10.5" (52 cm x 27 cm) replica of the Battlestar Galactica Viper Mark II! Truly an impressive showcase piece, this model captures the aggressive lines, triple-engine…
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
I liked the original model a lot, but I think two layers for the base is a little bit too thin especially when ironing (can see through the base with two layers). So I added a third layer at the base. Print instructions Print using 0.15mm…
I fixed all of the errors I could and merged the Front 2 parts, Mid 2 parts and the Rear 2 parts. I am still working on the Flight Pods, but I can confirm these 3 parts print just fine SLA. Not sure of the scale until I get the whole…
Three cubits modelled from close ups, ideal for resin printing.
Best Viper model out there. I just added some plugs to make the engines and wings easier to assemble and sturdier. The main fuselage was clipped to fit on a Flashforge Adventure 5. I also played with the Viper base from:…
A Cylon helment/head from Battlestar Galactica. Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've…
I have always loved the look of the Valkyrie, and Davids model is fantastic. I took my purchased CGTrader greeble sla's and did a re-skin (not studio accurate) of the model and increased the scale for my Anycubic Mono. I made 2 versions,…
Great source files at Thingiverse by EDY209 and David Bogearts for a great ship of the past. However, some of the parts had holes or gaps that negatively affected the print. I did what I could to fix those files so they print better. The…
This is an expansion pack for my BattleFleet (Star Wars vs Star Trek) game: http://www.thingiverse.com/thing:2052630 The set consists of ships from the 2003 Battlestar Galactica Reboot. BaseStar Cylon Raider Viper Battlestar Galactica…
A Viper sign from Battlestar Galactica
Design Concept The Battlestar Galactic Mini Model is inspired by science fiction battle starships, capturing the essence of a classic vessel in a compact size. Purpose This model serves as a collectible item for fans of space opera series…
Model of BSG Blackbird created in Tinkercad and Fusion 360
From "Galactica 1980" also seen in Buck Rogers in the 25th Century Season 2
I made this stand for DavidBogaerts model from Thingiverse. His original file is X=63.51mm, Y=119.03mm, Z=45.17mm. I scaled it up 140%. I chose that size because I had a Cylon Raider model that I scaled up to 387%. I estimated the…
I made these parts to make the print better. Original model on Thingiverse: https://www.thingiverse.com/thing:2432066 The dome replacement was necessary because the original didn't seem to be fully connected on at least one half of the…
Multicolor Battelstar Galactica Officer Badge. Haven't printed it yet cause I don't have the right colors on hand. Maybe someone can help me out by positing a make. Check out my other badges. And have fun printing.
Organizer for Battlestar Galactica - Base game and Pegasus to store them in a single box. Some decks are stored merged since we almost always use Pegasus. I printed an additional english rulebook for Pegasus, so maybe you will need a…
Remix of https://www.thingiverse.com/thing:4705401 . Fuselage modified to more closely match the model in the show.
I got a neoprene mat instead of the board, so I had to make some new resource dials. These are the same size as the cardboard, but has room for a 5mm diameter magnet underneath. Layers are 2mm and 3mm. I did a filament change on 2.1mm and…
A placard for all things Dwight Schrute. Bears… Beets… Battlestar Galactica… There are two designs - one with a hole for hanging and one without. I printed in Gold Silk PLA and Brown PLA. The colors are separated by layers for easy…
Night light lithophane for Battlestar Galactica fans.
Las piezas con un “x3” son iguales y hay que imprimirlas el numero de veces indicado
Rough model of the BSG Five-Seven mounted grenade launcher. Fits a standard pistol rail, but designed specifically for http://www.turbosquid.com/FullPreview/Index.cfm/ID/987085 One model has holes for fasteners, one has modelled fasteners.
Update 21.01.2021: Added bigger containers to accomodate for more ships in the same box, taking less overall space in the game box. Print one of each: BSG Containers [ship name].stl BSG Containers [ship name] lid.stl Heavy raiders: 4…
Started making badges for every scifi series I've seen so far. This time it's a badge for Battlestar Galactica If you got any suggestions just write a comment. Have fun printing.
Logo de la republica Galactica, sus medidas son 15 cm de diametro y 8 milimetros de altura, una ves tomado con el laminador se puede variar su tamaño de acuardo a gusto de cada uno. Logo of the Galactic Republic, its measurements are 15…
The old school Battlestar Galactica logo with the “angel” lady on it. It looks great because I put the flowing parts of her dress at different heights to give depth. It is about 9" (224mm) diameter. There is a screw/nail hole in the back…
The image is prepped using the HueForge software Using PrusaSlicer, I performed the color swaps at these layers: Black to layer five at 0.48 mm Grey to layer eleven at 0.96 mm White to layer twenty-six at 2.16 mm
Organizer for Battlestar Galactica - Daybreak and Exodus to store them in a single box. We rarely use Exodus so that goes to the bottom. I printed two additional english rulebooks, so maybe you will need a couple mm thick filler…
The old school Battlestar Galactica logo with the “angel” lady on it. It looks great because I put the flowing parts of her dress at different heights to give depth.It is about 4-½" (112mm) diameter. There is a foot that fits into the…
The image is prepped using the HueForge software Using PrusaSlicer, I performed the color swaps at these layers: Black to layer seven at 0.64 mm Grey to layer eleven at 0.96 mm White to layer twenty-four at 2.00 mm (** I could not get the…
The picture is of the 74mm front seat insert. The other picture also shows the 78mm Rebel insert. I designed this for my 2015 Jeep Wrangler Sahara Unlimited. I know they will fit other models and years, but I don't know which. There are…
Obviously, the FCC forbids the mixing of Dungeons and Dragons with Amateur Radio as the scientists at CERN have determined that such a coalescing of nerddom and geekery has the potential to rip open spacetime itself. Sounds messy. They…
I created it using meshy. AI, You can resize it so that it fits on the board.
One of my favorite shows (old and new). I liked the original yet wanted to control the colors better when printing so broke it into 3 parts and enlarged it to be 180mm diameter. If printing at 100%, the layer changes are as follows: Outer…
a trophy which is made by ai if you want to get the link just send me a message
External Cover for the Cooler Master Elite Liquid AIO Pump with a Galactica Logo
I couldn't find a Battlestar Galactica model from the new series on Printables, so I thought I would bring them to you from Thingiverse. I printed this great model from EDY209 on Thingiverse a while back. I also used the fixed parts by…
I have always loved the look of the Valkyrie, and Davids model is fantastic. I took my purchased CGTrader greeble sla's and did a re-skin (not studio accurate) of the model and increased the scale for my Anycubic Mono. I made 2 versions,…
Las piezas con un “x3” son iguales y hay que imprimirlas el numero de veces indicado
A helmet based on the Cylon / Zylon costume from the Battlestar Galactica Series The model is the full helmet, optimized for 3d printing with slots for potential LED's - it can be scaled and stretched to fit any wearer though scaling it…
A simple 3d model of the guns used by the Cylons from Battlestar Galactica this includes a full version as well as one split into parts for easier printing and one hollowed out to fit electronics inside
A basic 3d-pritnable model of the right armpiece of the Cylons from Battlestar Galactica
A 3d-printable model of the backpack and neck part of the cylon costume from battlestar galactica
A chestplate based on the Cylons from Battlestar Galactica - it can be scaled and stretched to fit any wearer and is easily printable in upright position with regular nozzle diameters
A basic 3d-printable model of the left armpiece of the Cylons from Battlestar Galactica
