Liczymy pasujące modele…
Weihnachtsengel mit Geige zum stellen und hängen! Ich habe die standard Slicer Parameter für PETG verwendet. Langsam drucken verbessert die Druckqualität! Druck: Düse: 0,4mm Schichthöhe: 0,2 Infill: 100% Ich habe PETG für den Druck…
An enclosure for the CAJOE RadiationD v1.1 geiger counter, with space for an ESP8266 for integration with home assistant through ESPHome. Works just fine without the ESP8266 as well. The lid has little notches to press-fit into place.…
I have created a housing for the Geiger counter GC-1602-NANO (CAJOE v1.1). I left openings for the connections on both sides. With the Plexiglass cover and the spacers, the Geiger counter fits exactly into the housing and closes flush.…
It would be nice if you post your makes. Thank you. See also my other mobile stands :-)
It would be nice if you post your makes. Thanks. See also my other mobile stands :-)
This started as a long shot project for a friend of mine in order to get a bit more experience dealing with Arduinos, circuits, soldering, etc and turned into a wonderful time. As such, I have thrown in a number of electronics to simulate…
Case for RadiationD-v1.1 (CAJOE) Geiger Counter GC-1602-NANO. Plexiglass flesh with the walls Power sockets and on/off switch accessible. No hole for the audio jack.
Mighty Ohm Geiger Counter Enclosure This project was realized while streaming live at https://www.twitch.tv/chrisfigge. Years ago i bought a geiger counter kit at chaos communication congress . Time flew by and i forgot about it. A few…
Use countersunk M3x10 screws to connect the parts.
Case to mount a SBT-10(A) tube and some space for drive electronics and a usb c or micro cutout. Should work with ESP D1 Mini glued in with the shield-can towards the case.
Front and Backplate to give the RadtiationD cajoe v1.1 additional functionality by adding a LCD Display and a Wemos D1 R2. I used M3 spacer with a length of 35mm and had to bend the dupont cables a little bit. Project Page:…
Enclosure for a popular geiger counter module with WeMos wifi module. Designed in FreeCAD, the model is included. I use espurna firmware for the esp8266 module. It supports this geiger counter module.
This is a box for MyGeiger ver.3 PRO DIY Radiometer Gamma Ratemeter from RH Electronics: https://rhelectronics.net/store/mygeiger-3-pro-diy-dosimeter-ratemeter-radiometer-kit-with-lcd-usb.html Box consists from three parts plus spacers.…
Simple geiger counter case for the kit linked below. Simple magnets can be inserted/glued to snap the case lid closed. Simple install, simple print. Shouldn't require supports. Let me know if you have any issues. Kit…
Based on an inexpensive kit from China, a Geiger counter for monitoring the radioactive ambient radiation was created. The required electronic components are listed in the github-repository where you also can find the necessary firmware…
I used this DIY kit and a separate geiger tube.
https://facelesstech.wordpress.com/2023/08/19/diy-geiger-counter/I designed a case for the Geiger counter that's available on aliexpress. It adds a arduino and a boost/charge board. I found a firmware for the arduino that takes the output…
This is a stand for my USGS Model 1 Item CDV-717 Geiger counter, found at a vintage shop long ago. It stands at an 11-degree back angle, and has room for the latches that would otherwise prevent it from standing upright for display.…
layer: 0.3 perimeters: 8 infill: 50% material ASA (watch out for curl when printing)
Remix of a MightyOhm Geiger counter case to add a hole for the potentiometer. The holes have also been enlarged to better show off the Geiger Muller tube.
I have made a compact pocket case that includes the 4.5v battery pack
This is my modified version of the 3d-printable enclosure provided by NetIO for their GC10next USB Geiger counter. I will continue to iterate on this design to add an area for batteries, a power switch, and other features. I will upload…
This is a simple case for the OpenRad PCB made by Design--Glitch on Reddit. See this post Link to my original post for this build on Reddit. The PCB slides in and is supported by two posts in the case. I soldered some of the taller…
I haven't found it to buy separately, so I had to recreated it according to the design of the original part. To avoid complex support builded under the print, I desided to split model into two pieces, so you gonna need one screw (M3+) to…
GGreg20_V3 Ionizing Radiation Geiger Counter TTGO-T-Display Li-Pol, size ≤ 803160 Code for ESPhome (Home Assistant)
This is a case for the gk-mini Geiger counter kit. More info on the kit can be found here . I am not the seller or designer of the kit, just a user who wanted a compact, portable enclosure. Note that I have version 1.5 of the kit. I have…
Needed a Geiger counter to check out some ore samples a friend gave me. Bought an inexpensive, already assembled one from Amazon that was already assembled and had a small display on the board. This one is also available from Ali Express,…
Náhradní víko litinového gajgru
This is a case for the gk-mini gieger counter kit. More info on the kit can be found here . am not the seller or designer of the kit, just a user who wanted a compact, portable enclosure. Note that I have version 1.5 of the PCB. For the…
Use bottom from the original model
I made this 3d model in my free time, please consider boosting the model to help me out! If you'd like to sell the PRINTED version of this model, you can purchase the model on my Patreon, This model is inspired by the Geiger counter in…
A case for the C7061 "World's Smallest Geiger Counter"
made from ASA natural
The Geiger Counter as announced in Make Magazin (Germany) 3/22 (Page 8) is a great pice of work. Our Geiger Counter runs non-stop for more than one year now with ESP8266 (D1 Mini Board), running ESPhome under Home Assistant. Original…
Used blue transparent PETG and some yellow PLA+ and standard supports 0.2 resolution, 3 bottom layers, 4 top layers, 3 maybe 4 walls I had to wap filament at 98/101 Printed on Neptune 4 Plus (OpenNep4tune mod)
Geiger tube sbm-20 Clip with 2xm2 mounting holes print at 100% infill
A simple replacement for the battery cover on the GMC-320S geiger counter. Has a somewhat steep 60 degree overhang, but is printable without supports otherwise. I used white Overture PLA.
I purchased a Cajoe V1 cheap 30 dollar geiger counter off ali express, had an RTC and a SD card reader from a random electronics kit, added a step down converter and an switch and SPI small screen to make this odd combo device, that takes…
Literally just 5 minutes thrown together in Fusion360 😅, to replace storing the Geiger meter in it's slightly bulkier original packaging. Fairly thick sides to keep the device safe. Also inflated 1 mm in the screen-direction to fit a…
Made a case for this 9 volt powered geiger counter i found on ebay. I'm not sure how accurate it is, but it's small, light, and is molle compatable. I'm unsure as to how long it will last on a single battery as I havent tested that aspect…
Bitte nur lebensmittelechte Filamente verwenden! Ohne Support druckbar. Viel Spaß beim Backen!
Bitte nur lebensmittelechte Filamente verwenden! Ohne Support druckbar. Viel Spaß beim Backen!
RadiationD v1.1 (CAJOE) for Home Assistant using ESPHome and ESP32-C6 Attention: The ESP32-C6 cannot handle 5V on the inputs. Add / exchange the resistors as shown in the images. ESPHome code taken from here Things Used: (non affiliate!)…
A box to store a Geiger counter onto the HSW system. The box is big enough to hold the counter in its case. Thanks to RostaP for the very useful HSW system. Printed in PLA, uses 31 grams of filament and takes about one hour on a BBL A1
Dust Cover for RDX DX-1 Geiger Counter/Radiation Monitor. Protects vents on Geiger-Mueller tube, display, and speaker holes from accumulating dust and damage. A perfect fit on my model--if you have tolerance issues with your printer, I…
Its a case for the Open Hardware Geiger Counter from MightyOhm Made out of 3mm Acrylic and some M5 and M3 bolts. Instructions Sandwich and bolts are all you need. Category: Other
This is a small stand for the GQ line of Geiger counters with a small slot for the radiation safety card. There are no overhangs and should be very easy to print. There is an optional version without the card slot.
Náhradní kryt geigeru.
This is a case for the cheap Geiger Counter available from China. It is combined with a ESP32 to display the count and also upload it to thinkspeak for remote monitoring. It features a hole for the ESP32 screen as well as another for a…
Multiboard Holder for Holdpeak 886A Radiation Detector Geiger Counter
A simple holder to fit a Geiger Counter onto the OpenGrid frame. Its big enough to hold the counter in its case if needed. Thanks to David D for the OpenGrid system. Using PLA, 25 grams of filament, about 40 minutes printing time on a BBL…
My Doze geiger counter came in a nice tin that I wanted to use but it didn't have an insert. It's a straight forward print, 4mm nozzle, 0.2mm default should work nicely. In my case the insert is a perfect fit but obviously different…
--- moved from MyMiniFactory --- --- for english please scroll down --- Gehäuse für Si8B-"Pancake"-Geiger-Zählrohr, das auch Platz für eine Wandlerelektronik bietet (einfach oben auf den Sensor im vorderen Teil des Gehäuses befestigen -…
I recently purchased a pre-assembled Geiger counter kit from Electronics Goldmine and noticed that they didn't have an option for a housing for it. So I thought it would be a fun Tinkercad project. This is a simple rectangular box with a…
⚒ This project was not planned in advance, but it marks the beginning of a new series: “Subscriber Requests: Brought to Life.” One subscriber asked: "Could you model a case for the RadBoy doomsday Geiger counter?" Official documentation…
Hi, ElectricDodo user did amazing Enclosure for CAJOE RadiationD v1.1, I just added simple LCD 2.2" mount.
You can buy the electronics from http://www.ebay.com/usr/impexeris . The opening for the tube is for a SI-29BG. Category: Gadgets
The Geiger Counter as announced in Make Magazin (Germany) 3/22 (Page 8) is a great pice of work. Our Geiger Counter runs non-stop for more than one year now with ESP8266 (D1 Mini Board), running ESPhome under Home Assistant. Original…
Multiboard Holder for Holdpeak 886A Radiation Detector Geiger Counter
RadiationD v1.1 (CAJOE) for Home Assistant using ESPHome and ESP32-C6 Attention: The ESP32-C6 cannot handle 5V on the inputs. Add / exchange the resistors as shown in the images. ESPHome code taken from here Things Used: (non affiliate!)…
A simple holder to fit a Geiger Counter onto the OpenGrid frame. Its big enough to hold the counter in its case if needed. Thanks to David D for the OpenGrid system. Using PLA, 25 grams of filament, about 40 minutes printing time on a BBL…
Weihnachtsengel mit Geige zum stellen und hängen! Ich habe die standard Slicer Parameter für PETG verwendet. Langsam drucken verbessert die Druckqualität! Druck: Düse: 0,4mm Schichthöhe: 0,2 Infill: 100% Ich habe PETG für den Druck…
