Liczymy pasujące modele…
A GOKU GM10 Pro V3 GPS holder that fits the original parts of iFlight Chimera 7 Pro V2 backend. It is designed so that the GPS can be slid into the holder although it's a tight fit. Also has a lip on the top for extra protection. Print in…
Here is my gps mount that will fit any quadcopter that has a 32mm spacing back plate and 20mm standoffs. was designed for the AOS series of qaud copters but will fit anything that has a back spacing of 32mm. printed with ninja flex tpu.If…
Original Antenna mount by "lukaskroll" on Thingiverse. I have modified one of his models to accommodate the GM10 Mini v3 GPS.
Just like the title says - custom mount for the GOKU GM10 Nano V3 GPS on the Quadmula Siren F3 split.
I love to make useful 3D Desgins, and i love Coffee: Buy me a Coffee: https://www.buymeacoffee.com/phitscho Or Twint me something over 078 713 68 61 THANKS! GOKU GM10 Mini V3 GPS Holder for BOB75 Frame with a 32x32 M3 Mounting. How to…
TPU 92A - 98A Při vkládaní GPS doporučuji print trochu ohřát horkovzduchem.
Geprc Mark5 O3 + GPS MODULE for GOKU GM10 MINI V3 W/COMPASS
Angle 40°. Version with mount above the camera stands, and version to use 20 mm holes. I printed with TPU-like filament with supports. P.S. Have not tried to connect GPS yet, will need soft serial for extra UART. P.P.S. Official guide…
Speedybee Mario 5 gps mount Foxeer M10Q-180 and Flywoo GM10 mini V3 with compass
Here is my gps mount that will fit any quadcopter that has a 32mm spacing back plate and 20 mm standoffs. was designed for the AOS series of qaud copters but will fit anything that has a back spacing of 32mm. printed with ninja flex…
This mount fits the GOKU GM10 Pro V3 GPS/Compass from Flywoo. It's specifically designed to be mounted on the FlywooExplorer LR V3 and should be a drop in replacement for the original mount. It may also fit the V4 explorer depending on…
A combination of a pavo20 O3 mount and a Goku GM10 GPS mount.
Foxeer Mega 5 FPV Drone Antenna and GPS (Flywoo GOKU GM10 Mini V3) holder, if you want GPS on your FPV copter. Printed in TPU with 15 % infill with supports. You can print upright or laying it does not matter. No special settings needed.…
Backpack pack Kayouloin 7" gps 25x25mm avec 1 ou 2 antennes Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
Holder for the GOKU GM10 Pro V3 GPS. It will fit on 24mm spaced standoffs. The holes are 6mm in diameter. Use the auto rotate in your slicer for best printing orientation. I recommend using auto tree supports only on buildplate.
GPS Module for CineLog35 V2 HD O3 for GOKU GM10 module. FPV GPS This is the GPS MODULE: https://flywoo.net/products/goku-gm10-mini-v3-gps-w-compass
gps goku gm10 Mini V3 with compas
It is an holder for nano GM10 GPS from Flywoo designed for AOS 3.5 frame. Installed in front just above camera. Works fine and no issue at all when crashing, the holder is soft but just enought to keep the GPS in place. Print Settings…
GEPRC MOZ7 V2 GPS Mount This model is designed to accommodate a smaller GPS unit than the original mount was intended for. Weight is reduced by more than half. Compatibility Flywoo GOKU GM10 PRO V3 BZGNSS BZ-251 Others with same…
Here is my gps mount that will fit any quadcopter that has a 32mm spacing back plate and 20 mm standoffs. was designed for the AOS series of quads. It will fit any quad with 32 mm rear spacing.If you need a different standoff height let…
Here is my gps mount that will fit any quadcopter that has a 32mm spacing back plate and 20 mm standoffs. was designed for the AOS series of quads. It will fit any quad with 32 mm rear spacing.If you need a different standoff height let…
Holder for the GOKU GM10 Mini V3 GPS. It will fit on 24mm spaced standoffs. The holes are 6mm in diameter. Use the auto rotate in your slicer for best printing orientation. I recommend using auto tree supports only on buildplate.
FPV MARK4HD FRAME MOUNT for GPS Goku GM10 Mini V3
I wanted to get GPS going on my whoop for reasons. I saw the GM10 nano already comes with a cool mount (TPU FLYLENS 85 T Antenna & NANO GPS Mount.STL), but it doesn't fit the existing monopole antenna mounting mechanism on the flylens 75.…
mount for the goku gm10 mini v3 w/compass for the back of your frame with 18mm standoffs so simmilar to tbs sorce one v5 5 inch print with print settings for your tpu/tpe for supports just look to the print file with your g/code viewer
The Gps holder above the camera. For the JeNo 3 drone. Gps goko gm10 mini v3. Material Tpu 75 FDplast.
Printed with .8mm nozzle and Yellow PETG at 240/90 degrees. Prusa MK3+ 3mm brass heated inserts for all screws. Be sure to print the loom part so the loom is horizontal and flate on the plate. Printing the loom part in the vertical…
GPS mount for the GOKU GM10 mini V3 with compass. Fits on the back of the ERA5 drone frame. Fits with the Vifly buzzer
Drone mount for a GM10 GPS module
Pavo20 Pro II mount for FLYWOO GOKU GM10 Nano V3.1 GPS I suggest print it in TPU, will be easy to fix it in the antennas.
New GPS GOKU GM10 v3 mount. The mount is slightly extended, so the GPS is further away from the VTX antenna. Even such a little thing helped quite a bit in finding satellites. Completely plug and play Print with TPU
New GPS GOKU GM10 v3 mount. The mount is slightly extended, so the GPS is further away from the VTX antenna. Even such a little thing helped quite a bit in finding satellites. Completely plug and play Print with TPU
