Liczymy pasujące modele…
The headlamp mount for the Wurkkos HD15 flashlight. With this mount, it is much faster and more convenient to mount the lantern on it. It is attached with a click and holds securely. The ribs on the mount do not allow the lamp to move. It…
Stand for the Fire HD 10 Gen9 2019 Model. The model is more or less generic and parametric so you should be able to adapt this to your needs as in different angles or other tablet types.…
Wall mount for 13th gen Fire HD10 (2023)
Official 3D print files for the HD1.
Original version for clip on fan or Dragon LC. 2022-06-13: Added version with integrated 40mm fan duct.
Welcome to the HevORT XHD12! What is it? Several members of the HevORT community were starting to build 3d printers larger than 500mm which is about the maximum that the standard 20mm gantry beams can handle before having rigidity issues…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Wurkkos HD10 mount snaps right into the Skilhunt HB3 headband! Works with Wurkkos HD10 series headlamp. The width of the mount is made to fit…
A MASSIVE round of applause to MirageC; not only for his design but willingness to share it with our 3DP community. This is a remix of the recently updated HD12 MGN9 CFx gantry. I love the design as usual but felt like these are soooo…
I was looking for a simple wall mount for my Fire HD10 Plus that is used as a home assistant dashboard. Since I couldn't find what I liked, I set about designing a wall mount myself. I printed my mount with standard quality settings.…
A Exoskeleton for the Ailunce HD1 Radio so your PTT, side buttons, volume and channel dials don't get pushed or changed unintentionally when, for example, used in a pouch or a plate carrier. Screws into the back of the radio (with or…
Thought the plate was thicker than needed, and I don't use the top head straps(they are all too short for my fat head!), so I thinned out the plat, and clipped the top loop off. Not the most streamlined job(lost some round overs) but it…
Hi, it's my quick flash holder for wurkkos HD15 and other Angled flashlights. handlebar 25-30mm. Light 21-25mm you need: 1pcs Screw M3x35mm 2pcs Screw M3x20mm 3pcs Nut M3 Cap for wurkkos HD15 is in my channel :)
Because of not being able to slide the tablet left or right out off the frame I've made a frame with clips. Now I can easily place and remove the whole tablet with frame.
The flashlight cap cuts off the light so you don't dazzle. It does not reduce the range of the flashlight, but only cuts off the top half of the light beam, like the lights in a car. In the pictures you can see how it works. The first was…
The plastic switch of my aunt's hair dryer broke, so I did the only thing conceivable to a maker. I designed and printed the part. It took me a few tries to get the dimensions exactly right, but it worked in the end. I printed the part…
Wall mount for a Fire HD10 tablet
Protective cap for socket HD16-9-1939S
This custom-designed wall mount securely holds the **Medion HD1* hair dryer using a snap-in mechanism for a firm fit. It allows hands-free use while blow-drying . The mount can be easily attached to the wall using two screws or a strong…
A dial cage for the Ailunce HD1 Radio so your volume and channel dials don't get changed unintentionally when, for example, used in a pouch or a plate carrier. Comes in two flavors: SMA -> for use with the default antenna or other…
Hikvision DS-HD1 doorbell mount spacer. Use with Hikvision base plate. Print Settings Printer Brand: Prusa Printer: i3 MK2 MMU Rafts: No Supports: No Infill: 20 Filament: Generic PETG Black Notes: No support need Category: Outdoor & Garden
Liked the org version, but wanted it a bit further back to be closer for shorter plugs, moved it 10mm, still lots of clearance on the prop, and the XT60 does not touch the frame. Enjoy! Category: Other
Zero Clearance Laguna Bandsaw Insert, hd16 lt37
Mount for an Ailunce HD1 radio for use with a Tek-Lok or Rusty-Lok for belt mounting. Has a cage around the ptt buttons to prevent accidental presses. Takes 2 M4x12 screws and 2 M4 hex nuts, I used the screw to pull the nut into its…
Pedal actuator for the Roland HD1 Lite e-kit. So the rubber actuator that it comes with dries out, and you can of course find replacement parts but I am hoping that TPU fares a little better. I tried different densities, 30%, 15%, as I…
HOMPLEX HD100 PRO Wallplate A wall plate for fixing a HOMPLEX HD100 Pro on the wall that I've created since the detector I bought was missing it in the package. It can be printed in PLA or PETG, 10% infill. Some supports are needed on the…
You also need to print a fitting counterpart! See below. Wurkkos HD10 Headlamp Mount for Vello Bicycle with shade + FreeCAD Model Holder for the Wurkkos HD10 headlamp , allowing it to be used as a bicycle light on a Vello bicycle or…
You also need to print a fitting counterpart! See below. Wurkkos HD12 Headlamp Mount for Vello Bicycle with shade + FreeCAD Model Holder for the Wurkkos HD12 headlamp , allowing it to be used as a bicycle light on a Vello bicycle.…
Pedal actuator for the Roland HD1 Lite e-kit. So the rubber actuator that it comes with dries out, and you can of course find replacement parts but I am hoping that TPU fares a little better. I tried different densities, 30%, 15%, as I…
This is a tool that allows you to unscrew the bezel on a Wurkkos HD10 right angle flashlight. It can be used with a 1/4" drive ratchet, or just your fingers. Files: - HD10-bezel-tool-v2.stl - Bezel tool Recommended Print settings: - PLA…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Wurkkos HD10 mount snaps right into the Skilhunt HB3 headband! Works with Wurkkos HD10 series headlamp. The width of the mount is made to fit…
This is my version 6 of a belt clip for the Ailunce HD1. Combining 3 different works, and making some additions/changes to it. Standard 30% infill is good, but if you want to use a hammer, 100% hex infill would make it much sturdier.
Using the amazingly fitting clamp for the Wurkkos HD10 flashlight from Spicy3d , Ive modded it out adding a self-locking adapter to a picatinny rail for universal mounting of the flashlight. The model has two components, the picatinny…
This is a tool that allows you to unscrew the bezel on a Wurkkos HD10 right angle flashlight. It can be used with a 1/4" drive ratchet, or just your fingers. Files: - HD10-bezel-tool-v2.stl - Bezel tool Recommended Print settings: - PLA…
This is a small portable USB-C charger for the RETEVIS RT29 / RT29D and Ailunce HD1. Instructions copied from original. Note that tolerances are pretty tight for getting a good firm fit on the radio. Each slicer and printer and filament…
This is a new version of the mount for the Wurkkos HD15 flashlight. The new version does not use m3 bolts. Instead, one part is forcefully inserted tightly into the other, and the mount remains collapsible. If necessary, you can fix the…
i couldn't find it so i am re uploading it. i did not create this Print Settings Rafts: No Supports: No **Resolution:** 200 Infill: 20 **Filament:** PolyMaker PLA Category: 3D Printing
