Liczymy pasujące modele…
Replacement for the chandelier cover, which hides the mounting/hanging and connecting hardware at the ceiling. It should work with any light hanging of 6mm cable, like the Ikea lights based on Hemma. It is also suitable, if the hanging…
Replacement for the screw cring to hold a lamp shade for Ikea Hemma. The dimensions resemble those of the original ring. I printed my test print with the fuzzy surface by Prusa Slicer, giving it more grip when screwing it together. The…
I wanted a smaller nut bowl with multiple compartments and I saw this muffin form at IKEA ( https://www.ikea.com/at/de/p/hemmabak-muffinform-grau-10573994/ ). I chose to design this airtight seal to prevent the nuts from getting moist for…
This screw is a remake of the original one that is supposed to come with the light shades, we bought multiple ones but for some reason one of the shades didn't come with one, instead of going back to the store i picked up the calipers and…
The original IKEA adapter broke after a few month on all of my lamps. This one replaces the original adapter by a robust screw fitting.
This is a lamp designed for the IKEA HEMMA style lamps. It consists on an inner ring and 10 City blades. Cities: ROME DUBAI NEW YORK BARCELONA SYDNEY PRAGUE PARIS TOKYO LONDON MOSCOW ASSEMBLY: Just press fit the blades into the inner ring…
I had to mount an IKEA HEMMA ceiling lamp and didn’t feel like going all the way to the hardware store. So I modified a ceiling hook to match the holes in the plastic mount. Important: Print with as high an infill as possible , especially…
Printing intended without support. Print with cable opening facing upwards. STRÅLA Christmas LED decorative table lamp HEMMA Lampenaufhängung
Replacement for the chandelier cover, which hides the mounting/hanging and connecting hardware at the ceiling. It should work with any light hanging of 6mm cable, like the Ikea lights based on Hemma. It is also suitable, if the hanging…
I needed to attach a IKEA Hemma ceiling lamp directly to the ceiling- without a steel hook as called for in the directions. This model allows you to do this. The orientation in the model is how I printed it to maximize part strength. I'd…
This is an Ikea Hemma cord set ceiling adapter for an 85% version of Frank Drescher's Moon Lamp . I used it so I could hang a downscaled version of the Moon Lamp I printed on my Prusa Mini using the hardware I had. To make it work I used…
A smaller version of the standard Ikea Hemma cable cover - choose between three different cable outlets (none, one, two) for connecting lamps. Print instructions Category: Household Print Settings Printer Brand: Anycubic Printer: Kossel…
Improved nightstand box for the ikea hemma lamp. I redesigned the box in onshape and was much happier with the results. Probably could use more perimeters, this printed in white is a little see through but works fine. Print Settings…
Improved Version Here: https://www.thingiverse.com/thing:317781 I designed this box for better storage organization on our nightstand lamps from ikea. This thing was made with Tinkercad. Edit it online…
This is a low profile ceiling rose for pendant lamps similar to the one included in the IKEA HEMMA cord set. I like the practical design and cheap price of the Hemma ceiling light suspension, but the ceiling rose is far too big and bulky…
Replacement for the screw cring to hold a lamp shade for Ikea Hemma. The dimensions resemble those of the original ring. I printed my test print with the fuzzy surface by Prusa Slicer, giving it more grip when screwing it together. The…
A light fixture to clip on to a fishtank or terrarium with glass that's approximately 5mm thick
shade printed with 0.8 nozzle 0.32 layer hight in vase/spiral mode ring and hooks 0.4 nozzle 0.2 layer hight easy install! just click the hooks on to the frame these are printed with : Esilk-PLA white from esun
The base of the Ikea Pendant lights (https://www.ikea.com/ca/en/p/ikea-ps-2014-pendant-lamp-white-copper-color-30311492) does not leave much space for hiding mistakes when cutting drywall sheets. Instead of recutting the gypsum panel I…
The Chandelier is based on the socket Ikea HEMMA E27. Instructions: 1) Print the parts (8 pieces) from PETG, ABS 2) Glue parts together with all purpose adhesive or cyanoacrylate (see Image) 3) Install socket Ikea Hemma E27 4) Install the…
For now I have designed three lamp holders for the ikea hemma but I will add others ... they screw directly to the thread of the ikea hemma M40x2.5 and you can make one with a total cost of less than 10 euros. I recommend to print the…
Lampshade fits to hemma ikea lamp with rhombus pattern, I've made 2 versions. Print instructions Layer height: 0.2mm Perimeter: walls - 4 , top - 5. bottom 4. Infill: no matter The assembly is very simple - attached it to "HEMMA" OR…
A geometrically intriguing Lamp. It consists of four cubes interlocked in each other to form a geometrically pleasing pattern. The theoretical fitting shpere would have a diameter of over 60cm, but as all the corners are rounded, its a…
This is a little fun project and probably my last submission for the ongoing "Let there be light!" contest - the Giant Hot End Lamp, a fun lamp for your printing booth! There are 3 different versions for the heater block available (Open…
On July 20th, 1969, the world felt just a little bit larger as Neil Armstrong and Buzz Aldrin set foot upon the lunar surface – the first humans to ever do so (only after leaving their friend Michael Collins alone in orbit about the…
I was in the need of more light in my workshop because there was only one little light bulb installed. Then I saw that Prusa made a competition and that I had one HEMMA light bulb socket at home so I thinkered around and decided to go for…
i wanted a large light shade for my Led hemma light Print instructions I recommend printing with 0.6 nozzle .3 layer height due to size. 10% Infill with a low temp LED PLA will work if you are printing a full size. PC if your printing…
This is a mounting bracket for the Ikea Hemma light socket (E26). It is articulated in the Z axis. You will also need 2 hex bolts (1/4" x 3/4" or any equivalent) and the 2 matching butterfly nuts in order to assemble it. There is a 7 mm…
The quite large lamp canopy of IKEA Hemma didn't fit our beamed ceiling, so I designed a smaller diameter (110mm) and overall size. The original cord routing screws in very well. Drawing is not fully defined, excuse for not being fully…
A small Tag to be labeled (designed for DYMO 32x57 label) that can be magentically attached to the IKEA Hemmafixare-Box. Printed in PLA or PETG. Supports are needed for the magnet-holes. For best sticker adhesion ironing is recommended !…
I wanted a smaller nut bowl with multiple compartments and I saw this muffin form at IKEA ( https://www.ikea.com/at/de/p/hemmabak-muffinform-grau-10573994/ ). I chose to design this airtight seal to prevent the nuts from getting moist for…
I recreated the IKEA Hemma Lamp Thread Cover in CAD so that anyone who wants to can build on it for their own creation. I am adding a 32mm version as well, although the DWG can easily be modified by cutting or adding 2.5mm sections from…
I loved the way the original looked but had to recreate it from scratch to make it fit on an IKEA Hemma Lamp. I also had to modify the angles to be able to fit the huge light bulb that I had. Requires superglue.
