Liczymy pasujące modele…
Cover for your Holosun 407C-X2 or 507C-X2 with side mounted battery tray. Print in supplied orientation. Designed to be printed with NO support and minimal bridging.
Keep your red dot free of dust when not in a case. This model precisely fits a Holosun 507 Comp red dot sight. It has a snap-fit design that will securely hold it in place. Printing: Material: TPU Layer Height: .2mm Nozzle .4-.6 infill: 15%
This is a cover for the holosun red dot. There are 2 versions, one for rail mounted and one for slide mounted dots. Print with extra perimeters so the model is solid. No infill needed. NO supports needed, if your printer copes with…
I needed a cover for my new Holosun SCS-MOS sight on my Glock - and there was none to be found... This is designed for my Glock 21 Gen.5, so the slide might be wider than on your Glock. Print in an flexible material, I used TPU. There are…
Simple fit case for weapon holo (Holosun 510C and 512C)
Trijicon RMR to Holosun 407k / 507k adapter plate for Brownells Glock 17/19 RMR cut slide or MOS Version 2 Will require the slide posts to be shaved down about 1.5mm or so, you will also need to grind away some material from the 3mm nut…
Fit is super snug, it is chamfered on the inside to allow for easier install. Grid is 0.8mm thick, which should allow 2 layer lines with a 0.4 nozzle. With a smaller grid thickness, I was having issues with the corners not properly…
Dustcover / protector for the Holosun EPS red dot sight. Printed in PLA with .2mm layer height and support. After printing, you need to heat the battery side of the cover with a lighter for a few seconds, put the cover on the sight and…
Cover for Holosun 507Comp-X2 - protect your red-dot! The cover snaps in place using the protrudings that fit indentations on red-dots frame.
Description When using red dots, the proper way to aim is with both eyes open. This cover will force you to do that by blocking view through the window. When aiming with both eyes, you should simply see everything and you don't notice…
Lower spacer for holosun HM3X magnifier.
This is a 9mm ammo holder designed to fit into a Holosun optics box. I tested it with a Holosun 508T box, but other optics fit as well, specifically other rifle optics. It was designed around a 120 mm x 90 mm box. It stores 70 rounds, in…
supports everywhere if wanted, supports on build plate only for better detail, recommended infill: 50% to 100%
The Holosun 407K is a direct mount on my Tisas Nightstalker Double Stack, but I found that even with the elevation adjustment to the limit it was still shooting too low. After getting a shim off of Amazon only to find it wouldn't fit on…
Nur ein 3D Scan von der Glock 17 Gen 5 mit dem Holosun Visier
It can be really annoying when the sun is in front of you and low in the sky... those with red dot sights will recognize this problem. This sun shade attempts to resolve that problem. Or, you can use it to occlude your dot to ensure that…
Struggling to switch to having both eyes open now that you have a red dot? Print this cover and now you have to have both eyes open to see any targets, or just cover the optic with blue painters tape... but you have a 3d printer, so…
Printed at 10% speed with ironing for the best look on my setup. (Prusa MK4S with in-line Creality filament dryer.) Worth the wait.
Happen to lose your Holosun optics box, but still have the lid around? This is a replacement box. I've found that so far, all the Holosun optics box use the same lid size, so this should fit universally. There is a 0.2 mm clearance so…
Summary This cover conforms to the undercut edges on the base edge of the 510c for retention. i.e. It doesn't just slide off. There are also some intentional "thick" areas between the inner and outer shells to give it some structure and…
Holosun keychain, can be used on backpacks, airsoft/real guns, its 13cm long
Created this model because i couldn't find anyone who had made one. i didn't want to pay $30 for a mounting plate. Feel free to do whatever you want with the model
A Cover for the Holosun 507C/407C This allows you to cover the front of the optic, but it still allows you to put the dot on target as long as you shoot with both eyes open, you can still put the dot on target. I found this effect out by…
Replacement bikini cover / lens caps for the Holosun SCRS. Printed in TPU. .2 layer height
Bracket to mount a Holosun K footprint red dot sight to the outer shield of 50mm telescope viewfinder (Mine is an Orion viewfinder but the outer shield is 58mm). Needs two 12mm M3 screws, two 16mm M3 screws, and 4 nuts for the red dot…
Cover for HOLOSUN SCS P-10. I couldn’t find an existing cover for this specific optic, so I decided to design and share my own. The model is optimized for TPU printing to ensure a snug fit. If printed with a more rigid material (such as…
Keep your red dot free of dust when not in a case. This model precisely fits a Holosun 507 Comp red dot sight. It has a snap-fit design that will securely hold it in place. Printing: Material: TPU Layer Height: .2mm Nozzle .4-.6 infill: 15%
Picatinny adapter for Holosun HS407c, also works with the HS507c, Trijicon RMR, and ADE Stingray red dot sights. Requires 1x 3/16" diameter pin to press fit the mount on the picatinny rail Print Settings Printer Brand: Prusa Printer: I3…
This is my attempt at modeling the Holosun 508t v2 RMR. It's not perfect and has no branding on it. Might need to be filed down on the front side to fit your weapon (I had to for mine). Have fun! Post-Printing Category: Sport & Outdoors
I really like to decorate my gun safe and gun room with the brands I use and like. Stickers are ok but when you want to change things up, the chance of peeling off a sticker and reusing it is very slim. So, I decided to print these logos…
Cover for HOLOSUN SCS P-10. I couldn’t find an existing cover for this specific optic, so I decided to design and share my own. The model is optimized for TPU printing to ensure a snug fit. If printed with a more rigid material (such as…
Pressfit anti-reflection device (ARD) for the Holosun SCRS. Printed in PLA, .1 layer to handle the thin honeycomb structure in the front.
This is a mount for the Holosun 509T pattern of micro optics. It's designed to use 30mm M3 hex head capped screws and hex nuts. I've tested printing this with up to a 0.6 nozzle and 0.2 layer height- smaller nozzles and layers will work…
This is a lens protector housing for a Holosun 510C for airsoft. Use the existing torx screws from the sight to mount this. There's a relief on the inside for a 2mm polycarbonate lens. Category: Sport & Outdoors
Quick and dirty cover for the new Holosun 507 Comp until manufacturing companies catch up with it. Just a basic box with the dimensions for the 507. Tabs added to the box to help keep it attached.
I modified Johny69's cover to fit the Holosun 507K X2 optic. The modification to the size was done by adjusting the dimensions in Prusaslicer. Cutouts were added to fit the SIg P365XL on the front and rear and I trimmed the inside wall to…
If you like my project you can buy me a coffee. Thanks https://buycoffee.to/dabal
Cover for the front of a Holosun 407K/507K reflex sight. This is the side that collects the most dust when holstered and is the hardest to clean. UPDATE: Added slots on the side to make it easier to grip when removing/installing. Print…
Remix of Johny69's canted mount to incorporate Holosun 407k footprint instead of picatinny rail. The mount is all one piece(minus the slide), I just changed filament from pink to brown at the start of the added plate to highlight remix.…
