Holosun 407K shim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This shim will help adjust the elevation of your Holosun 407K if it's shooting low and you can't adjust it enough.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
The Holosun 407K is a direct mount on my Tisas Nightstalker Double Stack, but I found that even with the elevation adjustment to the limit it was still shooting too low. After getting a shim off of Amazon only to find it wouldn't fit on the pistol, I remembered I had four 3D printers and could probably make my own. Happily, my first try worked great.
I printed this on my Bambu P1S with a 0.08 High Quality profile. I wanted as short of layers as possible as the thickness only drops from 1.25mm to 0.75mm. I printed it in ABS but it should work with your filament of choice.