Holosun 407K shim
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This shim will help adjust the elevation of your Holosun 407K if it's shooting low and you can't adjust it enough.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 69
- Makes
- 0
- Views
- 259
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial
The Holosun 407K is a direct mount on my Tisas Nightstalker Double Stack, but I found that even with the elevation adjustment to the limit it was still shooting too low. After getting a shim off of Amazon only to find it wouldn't fit on the pistol, I remembered I had four 3D printers and could probably make my own. Happily, my first try worked great.
I printed this on my Bambu P1S with a 0.08 High Quality profile. I wanted as short of layers as possible as the thickness only drops from 1.25mm to 0.75mm. I printed it in ABS but it should work with your filament of choice.