P
PrintablesB.Lucas
Gardena hoze adapter
The material should definitely be petG with 0.2 layers, unfortunately it needs a lot of support
- Pobrania
- 386
- Polubienia
- 53
- Ocena
- 4,2
Wyniki wyszukiwania: hoze
Liczymy pasujące modele…
P
PrintablesMark Ayton [MANTOGA]
Hoze - Push-fit 1/2 inch end cap
Print in PLA or PETG, 100% infill
- Pobrania
- 93
- Polubienia
- 12
- Ocena
- 0
P
PrintablesBC Designs
Hozelock Compact Reel locking key
I snapped mine a few years back and made a quick fix. Since buying a new reel I thought time to model a new key in case it snaps again. (Second picture is a product photo to show what this is for those trying to work out if they need this…
- Pobrania
- 77
- Polubienia
- 7
- Ocena
- 5
P
PrintablesFenman
Hozelock Square Tap Connector
The existing Hozelock Tap Connector doesn't fit square taps very well. I created this tap adapter in Fusion 360 to better fit the square taps that I have in my house. Both the adaptor body and screw should be printed in the orientation…
- Pobrania
- 68
- Polubienia
- 9
- Ocena
- 0
P
PrintablesDMD
HozeLock Gun Wall-Mount
Holds a HozeLock spray gun on the wall when not in use. Two screw holes.
- Pobrania
- 63
- Polubienia
- 11
- Ocena
- 5
P
PrintablesJaapp
Hozelock reel hose holder
Simple hose holder that attaches to the Hozelock Hose Reel handle. Use 2x M3 bolts and nuts to attach to the handle. Fusion360 source file and interactive viewer: https://a360.co/2rKyfiO Update 20-05-2018: Created a V2 version. Previous…
- Pobrania
- 60
- Polubienia
- 11
- Ocena
- 5
P
PrintablesEskildP
Wall mount Hozelock
Could not find this as a spare part for my Hozelock auto hose reel, so I designed my own based on the original one. To fit the size of my printer the model is slightly shrunk compared to the original part. I have not used it for a long…
- Pobrania
- 47
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJorisFRST
Holder for gardena / hozelock equipment
Prints without supports, use a material that can withstand the outdoors, ASA / PETG / PA I printed in PETG CF
- Pobrania
- 37
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSpammy
Hozelock hose reel wall bracket latch
More robust design. I used PETG for it. Snug fit.
- Pobrania
- 31
- Polubienia
- 1
- Ocena
- 5
P
PrintablesGigabeast
MicroTube Holder for Gardena/Hozelock Micro-drip Watering System - REMIX - Longer 16cm Length.
The original model was 10cm, I made it 16cm. Prints very easily and you can duplicate the STL on the buildplate to make several at once. I used PLA+ 0.4mm nozzle 0,2mm layers with no adhesion or support, 20% lines infill and standard 3…
- Pobrania
- 24
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFerhat Karatas
Knob Stop for Hozelock Auto Reel
Knob Stop for Hozelock Auto Reel Made with M3 threaded inserts (I used Ruthex RX-M3x5.7) If you appreciate my work By-Me-A-Coffee: https://buymeacoffee.com/ferhatkaratas Printer brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No…
- Pobrania
- 20
- Polubienia
- 2
- Ocena
- 0
P
Printablesvtraveller
Hozelock Autostop Water Pressure Fix
If you're here, you've probably been struggling with the Hozelock auto-stop adapters. They reduce the water pressure out of the hose in the name of allowing the nozzle to be changed without turning off the water. They however have a…
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFloatingBoater
Hozelock growbag waterer funnel
Hozelok produce a good growbag waterer with a large water tank and capillary matting, but the hole to top the water up is far too small. https://www.hozelock.com/product/growbag-waterer/ This funnel makes it easy to keep your plants…
- Pobrania
- 17
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJahla74
Pítko pro suchozemskou želvu
Pítko pro suchozemskou želvu, mělká miska na vodu s pozvolným přístupem proti převržení.
- Pobrania
- 13
- Polubienia
- 5
- Ocena
- 0
P
PrintablesCleaR Motorsport
HOZELOCK sprinkler bottom half
Those sprinklers are great distributing water, but really weak. Of 5 o them 3 were broken by my 7 (yes 7kg) lap dog. Here the solution. use the original o-ring in the quick connect, or just push fit a bit of hose over it. Recommended ABS…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRiotOne
Hozelock nozzle holder extension for hose pipe holder
Hozelock Nozzle holder clip-on extension for below hose pipe hanger. https://www.printables.com/model/479506-hose-pipe-hanger
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMR_Spagetty
HozeLock hose retaining clip
replacement hose retaining clip for inside the HozeLock 20/25/30m AutoReal so you don't have to spend £2 on a new original part should the existing one break or go missing I recommend printing it out of PETG to keep it a bit more springy…
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
PrintablesNigel W
Hozelock Nozzel Holder
Holder for a Hozelock hosepipe nozzel so it doesn't get lost when using a wind-up hose. Printed with PLA but use PETG if in direct sunlight. There are two versions, the one in the image it attached with automotive adhesive pad and…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFevvahz
Hozelock Reel Screw Cover
This is a cover to replace existing item on an old Hozelock reel which had perished. I printed it in black SUNLU 1.75mm PLA and it clipped into place securely. Dimensions; OD 75mm ID 60mm Height 6mm
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
Printableschristophe g
Tendeur de ressort pour enrouleur d'eau HOZELOCK
Si le ressort est détendu, l'outil permet de le retendre grâce à un cliquet de 16mm en otant uniquement l'arrivée d'eau
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
Printables
Hozelock nozzle holder extension for hose pipe holder
Hozelock Nozzle holder clip-on extension for below hose pipe hanger. https://www.printables.com/model/479506-hose-pipe-hanger
