Liczymy pasujące modele…
This is a set of cones for the http://www.thingiverse.com/thing:159219 marble run system. For the larger ones I add variants that can be printed without extra support. Update 2014-12-19 : Added OpenScad files Update 2025-12-29: Fixed…
There are already a couple of good models for LEGO duplo compatible marble run parts. Most of them didn't work for me so I designed my own. The marble cut out is the same as for the Hubelino parts (commercial marble run parts) so they can…
Great additional Helix compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. You can choose the Helix left & right direction. Did some optimization for better printing, like connected stud holes, thicker…
Simple remix of the wonderful "marble run cone - very small" by @wuz23 and remixed @c_schmitz. I use this as the piece at the very end of the marble run track to collect the marbles. Enjoy and post your makes! If you found my Things…
Great additional Drop compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. You can build tracks from 4 sites to the drop. It speeds up and goes in one direction. Did some optimization for better printing,…
Great additional Tunnel Set compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. You can choose 2x2, 3x2 and 4x2 length. Did some optimization for better printing, like connected stud holes, thicker walls…
Great additional 3x2 Slope compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. The 3x2 slope is a good addition to the 2x2 and 4x2 slope from Hubelino. Did some optimization for better printing, like…
A Ball that fits the Duplo Huboline marble Run.
Great additional Straight in two different sizes compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. You can choose 3x2 and 5x2 length. Did some optimization for better printing, like connected stud holes,…
Great additional Y-Track compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. Did some optimization for better printing, like connected stud holes, thicker walls and after much test-prints i managed to get…
Quick Turn is a fast curve, compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. Did some optimization for better printing, like connected stud holes, thicker walls and after much test-prints i managed to…
Great additional smooth short curve compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. You can choose left & right direction. Did some optimization for better printing, like connected stud holes, thicker…
Great additional Doublecurve set compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. You can choose 3x3 and4x4, each left and right direction Did some optimization for better printing, like connected stud…
Additional Jump compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. The balls do a little jump. Very funny you put some of them in a row to let the balls wobble. Did some optimization for better printing,…
I created this simple replacement ball for the Lego/Duplo/Hubelino marble run toy systems. The ball dimensions should be nearly identical, and you can vary the weight of the ball by including more or less infill, changing how fast the…
Hubelino ist eine großartige Duplo-kompartible Murmelbahn. Dieses Ding ist ein Lift für Hubelino-Murmeln. Der Antrieb erfolgt mechanisch und universell über einen Ixolino-Akkuschrauber, wie er eigentlich in keinem Kinderhaushalt fehlen…
A piece of marble track for Hubelino with length one for more flexibility in your track design. — Printing tips: Use a brim to improve bed adhesion. If the piece fits too loosely or doesn't fit at all, try to adjust the horizontal…
A DUPLO compatible pillar 8 bricks high and 4x4 wide. Visual appearance inspired by a “Ground support” or “Truss tower” from Event / PA technology. Pillars come in handy to easily achieve certain heights. Especially when building a DUPLO…
Print two hulls with the flat side down. Print one core with the side face down. On this image I marked the down face in blue. This way, the layerlines of the plug are 90 degrees to the layerlines of the hulls, providing maximum strength.…
Výškově variabilní šnekový dopravník na kuličky k dráze kompatibilní s Lego Duplo. Výšku lze upravovat vkládáním nebo odebíráním mezikusů. Kostky jsou rozměrově kompatibilní s kostkami Lego duplo. Základnová šneková hřídel je se základnou…
I saw the need for an elevator for my Kid's Hubelino marble system more than they did, but they liked it a lot in the end nontheless.. I had a cheap 12V geared motor with (CM-370-1260 w/ 10 RPM) still laying around from another project…
A DUPLO compatible pillar 8 bricks high and 2x2 wide. Visual appearance inspired by a “Ground support” or “Truss tower” from Event / PA technology. Pillars come in handy to easily achieve certain heights. Especially when building a DUPLO…
A DUPLO compatible pillar 4 bricks high and 2x2 wide. Visual appearance inspired by a “Ground support” or “Truss tower” from Event / PA technology. Prints without supports.
A piece of marble track for Hubelino with length three for more flexibility in your track design. — Printing tips: Use a brim to improve bed adhesion. If the piece fits too loosely or doesn't fit at all, try to adjust the horizontal…
LEGO Duplo and Hubelino compatible hole down. I used tree supports which worked great for separating. Don't forget to use supports in the circle area.
This remix of the Hubelino Elevator offers users several options for upgrading and customizing the original model: Rotary Knob : A newly designed rotary knob has been created to replace the motor in the original model. This allows for…
A DUPLO compatible pillar 8 bricks high and 3x3 wide. Visual appearance inspired by a “Ground support” or “Truss tower” from Event / PA technology. Pillars come in handy to easily achieve certain heights. Especially when building a DUPLO…
This is a Remix of: More detailed of the part named cone_mid_flat_inlet It was mentioned in the comments of the remixed file that the stubs come lose and are already separate in the model. That is correct and fixed in the attached files.
Standard path-finishing brick for Duplo marble run.
I designed a few special building blocks for the marble run with Hublino or Lego: A drop section measuring 2x2 A drop section measuring 2x4. Here, the track runs diagonally through the brick A drop section measuring 2x6. Two tracks can…
These three adaptors allow the combination of my DUPLO compatible pillars of different widths. The visual appearance is inspired by a “Ground support” or “Truss tower” from Event / PA technology. The pillars can be found here - 2x2…
Base plate for Hubelino/duplo ball track. Printed from PLA with perimeter 3 and layer height 0.2mm. Plate size 159x159mm
My first try to make a printable 3D Model. I hope it works and you like it.
A straight marble run element of length 1 was oftentimes missing when building with my kids. There are several other models online; I tested some/most? of them and was not satisfied with the clamping force of these straight-1s. This…
This is a replacement lid for a 1kg Kraft or Kirkland Signature peanut butter jar that has a coin slot. It's a great dexterity toy for children to play with. Use it with tokens, doubloons, poker chips, or whatever fits. (It probably works…
As a remix this THING uses the original version but provides two-coloured versions of the 3 large components of the tower. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 3 Rafts: Yes Supports: Yes Resolution: 0.4 x 0.15…
Base plate for Hubelino/duplo ball track. Printed from PLA with perimeter 3 and layer height 0.2mm. Plate size 159x159mm
I love Hubelino, and when I saw this video by GravityBites on youtube last year it was one of my initial inspirations that led me to look into 3D printing. I'm reuploading to Printables because it's only in Thingiverse. Original details…
