Liczymy pasujące modele…
Příchytka na čalounění - dočasně trvalé řešení zlomené příchytky. Tisknuto z PET-G a drží (z PLA praskla). Temporary (forever) solution. I printed it from PET-G and works fine (or ABS/ASA should be OK, from PLA it cracks - too fragile…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hyte Y60 Fan Bracket (3x120), I made the second version of the https://makerworld.com/en/models/138628#profileId-151004
Wydruk około 1,55 €–1,90 € nettoWstępna wycena jednego wariantu
Like the original Hyte Y60 model, but good for 2 x 3 slot GPU.
Wydruk około 3,54 €–4,32 € nettoWstępna wycena jednego wariantu
Simple holder for the powerbank from Alza on the Ikea Skadis jednoduchy úchyt pre powerbanku z Alzy na Ikea Skadis inner size of the holder is 60mm x 28mm x 33mm/height/ vnútorný rozmer je 60mm x 28mm x 33mm/výška/ link to powebank:…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
Úchytka k nábytku, rozteč děr 65mm. Závit M3.5, M4 a M5. Koukněte i na mé další modely .
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
Vyrobeno z PLA. Nastavení tisku viz .gcode (měl jsem to z předchozího modelu a nechtělo se mi měnit tryskau), ale stačí tryska 0,4 a rozlišení 0,3mm. Použité vruty 3x10 mm. Háček - viz…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
Clips are adjustable for better montage. Uchytky jsou stavitelné pro lepší montáž. Note: If you like this model (which is not behind a paywall) you can buy me a coffee.
Wydruk około 6,09 €–7,44 € nettoWstępna wycena jednego wariantu
Úchytka kabelu na rameno mikrofonního stojanu BESPECO SH13NE.
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Chytka kabelu do průměru 10mm. Ideálně pro našroubování nebo přitlučení do stěny.
Wydruk około 1,71 €–2,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
k sestavení příchytky je třeba 2 ks šroubů s imbus.hlavou M3 délky 19 mm a 2 ks matek M3, je třeba nastavit přerušení tisku k vložení matic
Wydruk około 3,14 €–3,84 € nettoWstępna wycena jednego wariantu
The model features a tight fit for the AirTag to hold it securely in place. The outer circumference has a precise fit. I recommend wrapping it with 1 layer of tape to reduce slippage. The model has been tested and holds securely in place.
Wydruk około 2,46 €–3,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tisk asi nejlepší na ležato s podpěrami. Možno i jemnější tisk, ale 0,2 funguje.
Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PETG, výška vrstvy 0,2mm
Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description and Design Goal: Regular flashdrives are boring. Originally, this was created with the intention of storing rhythgame songs. This shroud is designed to fit the 128gb/256gb Amazon Basics flashdrive (I have not tried this with…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Hytte (2025) is the first lamp designed by Scandinavian designer Karl Fartensen to be fully 3D printed. An fundamental drawing of a house ( "hytte" in Norwegian ) that every child on the entire globe can draw, was transformed into a…
Wydruk około 8,84 €–10,80 € nettoWstępna wycena jednego wariantu
Good morning, Welcome to my profile, full of models and miniatures :-) I have a catcher for the rest of the filament for you, so that it does not roll all over the printer. It works well and is easy and economical to manufacture. Modeled…
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám tu pro vás chytač zbytku filamentu, aby se Vam neválely všude kolem tiskarny. Funguje obstojně a je lehky i usporny na vyrobu. Modelovany specialne pro Anycubic Kobra3…
Just like the name suggests, this is a two part print that enables you to sandwich the top mounted radiator. I have included the STEP files if you require more than 25mm of extra space or if you're using thinner than 25mm fans.
My own design of an LCD cover for the Hyte Y60, since I wanted something that completely covered the back as well as holding both PCBs inside. There are models for the VSDISPLAY 12.6" NV126B5M-N41, as well as the Hyte DIY LCD Kit. You…
An adapter to fit three 120mm fans on the “front” side of your Hyte Y60 case! 20 fan screws and 3x120mm fans are needed for this modification. 4x screws per fan to hold them onto the adapter/shroud. 8x screws to mount the adapter/shrouds…
As the name suggests, this is a bracket mod for the Hyte Y60 to allow for a triple 120mm fan configuration on the side. The design was inspired by a bracket mod designed by Kataya on Maker World. I have attached the link to it in the…
In an attempt to clean up my desk the thought of hanging my headphones off of the front of my Hyte Y60 came up. So I designed a holder that supports the headband most of the way instead of the general holder that just supports the…
Simple furniture handle replacement, dimension between screw holes is 64 mm. Fusion 360 file included. Úchytka na nábytek, šuplíky, skříňky s rozměrem mezi montážními dírami 64 mm. Print instructions PLA 3 perimeters 15% infill
Knob designed with attention to the best possible grip comfort. Turn the knob by 45°, depending on your prefered grip position. Hole for screw with included M4 thread. Print instructions I used PLA, but any material will do No supports…
I decided the easiest place for me to hang my headphones would be from the front of my Hyte Y40 case. The hanger works on the front or side by slotting into the grill on the top of the case. I have no way of testing the theory, but the…
HYTE Y60 Horizontal GPU mounting bracket. Requires cutting of case and drilling holes in case metal to install. Designed to allow for horizontal GPU mounting inside of the HYTE Y60 case for better airflow and cooling. ONLY FITS Y60 CASE!…
Prichytí obrus k stolu. Niekoľko veľkostí. Attaches the tablecloth to the table. Several sizes.
==== CZ ==== Běžná nábytková úchytka na skříň nebo šuplík ve skříni. Rozteč děr: 96 mm, Rozměry: 104 x 26 x 11 mm Rozteč děr: 128 mm, Rozměry: 136 x 26 x 11 mm Rozteč děr: 160 mm, Rozměry: 168 x 26 x 11 mm Díra na vrut: průměr 3mm Tisk:…
prichytka calouneni dveri auta. ve sliceru je třeba nastavit “detekce tenkých stěn” aby se správně vytvořila první vrstva včetně křidýlek. Pokud potřebujete úchytku upravit, zde je zdroj https://www.tinkercad.com/things/ddFXnxxtSBB-autocudl
ErgoPad Modular Dance Pad by EricPrintedDesigns *I've probably missed some things with my guide below, if you attempt to build one of these and run in to any issue, please reach out to me. Thanks! Required materials - M3x8 Bolts, used for…
Jednoduchý na tisk.. PLA,PTEG,ASA ideální… pro lepší pevnost vyplň min. 20%
🇬🇧 Description (English) Template for drilling holes on IKEA METHOD kitchen fronts with LERHYTTAN design and ENERYDA handles. The distance between the handle holes is 96 mm (for 112 mm handles), and the handles are positioned 27 mm from…
A simple friction fit guard to help prevent accidental volume/channel changes during light everyday use. Cutouts on either side provide enough room to make small adjustments to volume and channel knobs without needing to remove the guard.…
In an attempt to de-clutter my desk I thought it would be a good idea to rest my headphones on my computer case rather than traditional desk-mounted holders or under-desk clamps that my curious cat could easily reach. Unfortunately, I…
Have a Hyte Y60 with a thick radiator/AIO? Look no further as I've made two configurations for your use case: Config A simply adds a cutout and Config B is a complete overhaul. Config A. Adding a cutout for a 360mm radiator Config B. Full…
Easy printing holder rod fo ice fishing. Recommended material PLA / PETG Standard setting - layer 0,2 - 0,3 mm
Rhythm egg filled with rice to make a nice sound when shaken. Made it for my daughter as she liked one that her friend have. Decided to make one myself with her name on it. Insert a pause during the print and simply put in some rice. The…
I'm designing a simple mount to hold up a 12.6mm screen as a sensor panel which will mount in the corner glass location of the Hyte Y60 PC case. Basically it uses the two original top screws that hold the glass in the case, and keeps some…
I took measurements of the broken piece after i broke them trying to fit all my terrible cable management inside. I print them using 0.2 quality on a anycubic kobra pro 2 using speed pla ( i think it is pla+). If you need it like me…
Easy cabelclip for 10.5mm dia cable, printed on Prusa Mini+ 0.4mm nozzle, 0.2mm layer, ASA (also ABS, PETG or PLA can be ok)
Úchyt lanka na žaluzie pro plastová okna,původní úchyty po několika letech praskly Print instructions Vytištěno z PET-G se 100% výplní vstva 0.05
Příchytka k uchycení kabelu na zeď.
Základna pro chytrou tužku Albi 2.0. Usnadňuje skladování i nabíjení chytré tužky. Tisk bez podpěr. Base for the Albi 2.0 smart pencil. Makes it easy to store and charge the smart pencil. Printing without supports.
Mřížka na trubku 150mm s úchytkami - Grid for pipe 150mm with handles
This Arc Flipper Fidget Toy is a fun handheld game where an object (or objects) is flipped and travels back and forth in a mesmerizing pattern, across an arc rail, from one spring action flipper to the other. Besides being a ‘cat toy’ for…
Když je OBI zavřené, ale potřebujete přidělat kabel. Průměr otvoru pro přichycení jsou 4mm.
[CZ] Úchyt pro montáž napájecího adaptéru na DIN lištu. [ENG] Holder for mounting the power adapter on a DIN rail. Category: Electronics
Simple fan duct for assisted VRM cooling designed with the HYTE theme, designed for the Y70 case but should fit many others, bolt pattern matches a 140mm fan, and is designed to fit over a 120mm fan. Requires 4 x brass threaded heat…
This is a Hytera charger adapter for the PD656 radio.
Úchyt spojek C a B na panel nebo stěnu. KSL 527070
Jednoduchá úchytka k šuplíku.
Ahoj, vymodeloval jsem dle originálu 1:1, vyzkoušeno, sedí. Nebavilo mě stále kupovat náhradní sadu dílů k roletám, které nevydrželi ani měsíc a roleta mi non-stop padala z okna. Když mám už doma tu 3D tiskárnu a Fusion, proč vlastně…
It's a 1/10th scale y70, not much more to say about it. I haven't tried printing it yet as I have other projects right now. if I make changes or have any concerns/advice ill update this. thank you for printing, it's my first upload!
ECG waveform Heartbeat line Heart rhythm heart cat wall. Feel free to scale it to your liking or to fit your printer. Let me know if you'd like another model, and I'd be happy to design it. More models on my profile. If you like it and…
This is a set of pieces to help the Hyte Y40 intake air make it out the back vs the closest exit. This helps ensure air passed past the GPU/CPU and out the back/bottom more than just the closest exit. I'm not a thermal engineer but this…
The Hytale Logo broke up into parts. The H is separated and detailed to perfection* and the "ytale" has been rendered with or without the leaves.
This is a bottom brace to hold an inward facing self adhesive LED strip. You see the stuff being lit up but not the LED for the most part. The total length of the face that the LED mounts to is 615mm/ 24.2". Printed in Eryone matte black…
Radiator side-cover clip, direct replacement for broken original piece. Recommend to print in PET-G, 0.2 mm layer height with 30% triangular infill. Use PLA only when you are sure your radiator temperatures will be well bellow 60 °C all…
You can stick your plants to the model and just let them grow in your tank. Perfect for breeding you epiphyte plants. The model is designed for standard suction cups from Eheim if you place the model vertically like in the picture. You…
Simple trim to cover/hide your fans and radiator in for the Hyte Y70 PC case, can be used in other cases, but I specifically designed it to fit Hytes theme. There is two types: Type 1: This is for a push pull system with fan + rad + fan…
Úchyt prodlužovačky pro montáž na zeď.
Do you like tying a tie? Do you know the windsor or half-windsor knot? Who cares about tie knots, right? :-) This is a universal solution. No more horrible tying a tie! Assembly instructions in the gallery. Changelog: 8/11/2020 added…
Příchytka čalounění na Favorita
Material Frame parts ABS, ASA, or PETG Armor parts Any Layer height First layer 0.2 mm Other layers 0.15 mm Number of perimeters 2 Infill 20%, rectilinear First layer speed 25% of default Elephant foot compensation 0.15 mm Supports None…
Tisknuto v PETG a doporučuji 100% výplň. Mělo by odolat účinkům benzínu. Úchytka tisknuta ve FLEX materiálu.
Díl je velmi jednoduše tisknutelný s minimem podpěr, dej alespoň 5 perimetrů. Kamerka drží a pro vycvaknutí je potřeba použít sílu, ale mám na modelu přípravu pro budoucí zajištění, aby nemohlo dojít k samovolnému vypadnutí. Kamerku lze v…
Vytiskl jsem z PETG myslím že by to mělo být ok pokud budete používat v místě na které bude svítit slunce pak bych doporučit ABS nebo ASA. Barevně dle uvážení každého.
What was the trigger... Utricularia jamesoniana ( more info ) is one of my favorite carnivorous plants species. In their natural habitat they're perennial epiphyte carnivorous plants growing in lowland rain forests or montane cloud…
Pro kabely o průměru 10mm
úchyt na 1/2" záhradnú hadicu 1/2" gardenhose wall mount Print instructions uchyt_hadica.stl je diel ktorý je zobrazený na fotke. Spevnená verzia - uchyt_hadica_v2.stl, nieje otestovaná. uchyt_hadica.stl ist the part shown in the…
Individual tiles are sized proportionally to the note or beat that is depicted on them. Students can use these tiles to learn about rhythm and meter and gain a better understanding of how long or short certain notes are. 3D PRINTING…
Benchy with italian hand gesture
Samolepící kabelová příchytka k rychlému přichycení kabelů nebo jiných předmětů pomocí stahovací pásky. Tisk bez podpěr.
This is a sleek, Fish Tank-style 3D printable PC case designed to show off your build like a display piece. The sharp edges and plexiglass side panels give it a clean, futuristic vibe while keeping all the hardware visible. Despite the…
There weren't any screw mounted mudguards for my 2017.-2021. Fox 34 Rhythm fork, so I decided to make one. It took about a day to make fit right. You will need 2 M3 8mm screws to mount it. If you want to do any modifications to the model,…
Náhradní příchytka nádrže pro Babettu 210. Tištěno bez podpěr.
Když je OBI zavřené, ale potřebujete přidělat kabel. Průměr otvoru pro přichycení jsou 4mm.
This part is used to hold a swinger.
Materiál: PETG Perimetr: 3 Podpory: NE Výška vrstvy: 0,2
Studenti si vytvoří chytrou pokladničku pro jejich jarmarky a další akce. Projekt je vhodný pro nauku o servomotorech a senzorech.
Žáci navrhnou, zpracují a vytisknou součásti chytrého květináče, který bude sloužit k automatizovanému pěstování rostlin.
Drzak na plechovku na opasek, nebo jinam
Controller holder for Hyte Y60 case. Can hang off of the front or the side. I don't have every type of controller, but the mount is pretty simple and should be able to hold any controller I would think. If you want to hold multiple…
Když je OBI zavřené, ale potřebujete přidělat kabel. Průměr otvoru pro přichycení jsou 4mm.
EN: Cable clip for various use. Just change variables for cable/screw diameter and model chage it's size. CZ: Klip na kabel pro různé použití. V projektu stačí změnit průměr kabelu/šroubu a model upraví svoji velikost.
I wanted to install a Thunderbolt 4 expansion card, but the design of the Y40 restricts full height cards. Because I couldn't find a half height card from any manufacturer, I had to get creative. Using a 4x riser sourced from amazon (link…
Hyte Logo printed using: Generic PLA White Generic PLA Black ColorFabb PLA Signal Yellow The model is very large, you're gonna have to size it yourself.
This part is used to hold the esox swinger.
Find the PDF Build Guide & programming application at the github link below GitHub: https://github.com/joshuaua/SHREDDER
Verzia úchytok a dorazu na stolík Ikea Lack pre kruhové magnety priemeru 10 mm a hrúbky 2 mm.
这款花瓶是参数化设计与现代增材制造技术的结晶。其设计灵感源自自然界中律动的波纹，通过精确的算法生成连续且富有动感的曲面形态。 视觉美感：花瓶表面由细腻的等高线纹理构成，在不同光影下能呈现出迷人的明暗变化，如同一座微缩的现代雕塑。 材质工艺：采用优质的白色丝绸PLA材质进行3D打印，赋予了作品珍珠般的柔和光泽和丝滑触感。 空间适配：其极具张力的几何造型，无论是搭配禅意的枯木，还是点缀现代极简空间，都能成为视觉的焦点。 Category: Decor
Zachtávače vlasů v odpadu. Print instructions Tiskněte z PET-G. S tímto si musíte trochu pohrát.Nejlepší je ve sliceru použít modifikátory a odstranit spodní a vrchní vrstvy,zvolit si požadovaný vzor výplně a hustotu.Je to o…
The HYTE HG10 Headset Stand is a work-in-progress design that Evil Sheep and I are currently creating together. We used the design of the HYTE Y60 as inspiration, taking the necessary measurements and making adjustments to suit our needs.…
I got fed up with catching my cat sleeping on top of my $3000 pc, so i took inspiration from the spikes they use to keep birds off of ledges and created these. Just print about 20 of them and slide them into the grooves on top of your…
no support, 5 perimeters, 0.2 mm, 100% infill PETG obdélníkový pin je vlepen a zalisován / the rectangular pin is glued and pressed
