Liczymy pasujące modele…
Presenting Ichigo's Zanpakuto in all it's Shikai glory! The model is printed in multiple parts, painting is necessary on the blades (there are stencils included to help with it). ALL MANNIKS3D designs are protected by Copyright Law. When…
Level up your cosplay with this Bleach-inspired mask! Designed for easy 3D printing, it’s split into parts so you can print and assemble it hassle-free. Perfect for fans looking to recreate the look or add a standout piece to their…
Porte-clef de l'anime Bleach Duo Ichigo-Rukia. voir mon 2e modèle avec la même image qui tourne ici. settings : single extruder layer 0.2 noze 0.4 standard quality infill 20% enble ironing (surfaçage) - optionnel, on verra juste moins les…
Sign inspired by the number "15" seen on Ichigo Kurosaki's room in Bleach. Perfect for door or shelf decoration. Designed based on the anime/manga with approximate dimensions of 16x15 cm. Can be 3D printed and painted for better accuracy.…
Here is the PrusaSlicer version I used on my Prusa MK4S with MMU3. You can use the recommended 3MF or STL with the manual print instructions below. Manual print instructions 100% infill Layer height: 0.08mm First layer height: 0.16mm…
Show off your love for Bleach with this keychain featuring Ichigo’s iconic Hollow Mask! You can choose between a one-sided version for a sleek, subtle look, or go all out with the two-sided design to show off the mask from every angle.…
A basic 3d-model of the sword Zangetsu used by Ichigo from the anime Bleach in its Shikai version This includes a full model of the sword as well as one split into 9 parts for assembly using 4mm support rods
In case you disliked the original stand as much as I did, let Ichigo stand on his Reishi as usual It is mounted with 2*3mm wood screws You can also parametrize it to your liking (tilt mainly) here: onshape
Ichigo Kurosaki's First Shikai, Zangetsu for the Dummy 13 Model Scaled to a standard D13 Model (100%). Two versions available: Manga accurate - based on images from the official manga. This one prints uprights to avoid support scarring on…
Presenting my new and improved version for Ichigo's First Bankai, from Bleach. The model is printed in multiple parts, no painting necessary,. ALL MANNIKS3D designs are protected by Copyright Law. When you purchase, you do NOT have the…
Presenting Ichigo's Zanpakuto in all it's Shikai glory! The model is printed in multiple parts, painting is necessary on the blades (there are stencils included to help with it). ALL MANNIKS3D designs are protected by Copyright Law. When…
Depend on the white you have will give different result Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 112.5x200mm in size You may print at higher layer heights below the Base Thickness of…
Hi, I created a new image on Hueforge. This time, it’s Ichigo from the anime/manga Bleach . The image looks a little chaotic, but that’s pretty much what happens when he’s halfway to becoming a Hollow, so I thought it was very fitting.…
Ichigo Kurosaki from Bleach. Printing it right now, will update with picture later. Check for supports twice at start. You can donate/support here : https://www.paypal.me/ludiks , thank you so much if you can do it. Category: People
This is Bleach Ichigo's Zangetsu Sword 1:1 model, i added a whole stl, but sliced it into pieces later in the slicer. I added the slicer project file which is pre-cut so you don't have to do it yourself, enjoy the model!!!
Customized version of https://www.thingiverse.com/thing:74322 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=74322 Instructions Using the following options: picture_shape = standard picture_orientation =…
A shell inspired by the strawberry character from tamagotchi. It's small and compact. It still needs some work but I wanted to upload the prototype anyway.
As we see at the beginning of 1k blood war in the anime bleach , the main protagonist ichigo gets an awakened version of his swords . I didnt see any available models for this cosplay so I made both the big sword and the second one he…
Utilizar boquilla de 0.4 mm Activar el cambio de capa para las líneas que formaran el dibujo, la altura del cambio dependerá te tu configuración. Imprimir a una velocidad lenta.
WORK IN PROGRESS !!! I AM ACTUALLY JUST PRINTING THIS SO CHANGES MAY COME AS I FACE PROBLEMS !!! Bleach Ichigo chain “printinplace” from entering soul society So i was rewatching Bleach and one evening i decided to do some modeling and…
THIS IS A WORK IN PROGRESS I will update the description as I work on it. The two blades are broken up into pieces to fit on most average sized 3d Printers. There are 3/8 inch holes that will use rods of 15.5"/11.5"/27"/33.5"/15.5"…
This is a very simple IchigoJam case. You can use IchigoJam in the case. The following items are required to fix the IchigoJam to case. 4) M3x5 screw Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes…
Edited versions of the Guard, Bottom, and a added chain to make the katana look like ichigo's Bankai from bleach.
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #11 ivory white At layer #13 gray At layer #17 white
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black ivory whhite 11 light grey 12 white 23
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black red 13 yellow 14 white 20
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black red 13 yellow 14 white 20
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black red 14 yellow 15 white 20
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black dark blue 12 turquise 17 white 22
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black red 15 gray 22 white 27
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black blue 13 turquise 18 white 20
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black red 12 orange 14 white 21
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #7 brown At layer #15 red At layer #18 white
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission…
As a huge fan of Bleach, one that used to buy a lot of keychains related to bleach (actually my gf would buy them for me 😅) I decited to make Ichigo's hollow mask into a keychain. For people without AMS there are pauses on each color…
I am a big fan of the longest running anime Bleach, and a nice little prop to make is Ichigo Kurosakis combat pass, er, secret surveillance gadget thing. I have tried my best to make this to scale to the original in the anime, and also so…
Here is the PrusaSlicer version I used on my Prusa MK4 with MMU3. You can use the recommended 3MF or STL with the manual print instructions below. Thanks to the author: https://www.deviantart.com/bleachfan14/art/Ichigo-vs-Ichigo-132355764…
Here is the PrusaSlicer version I used on my Prusa MK4 with MMU3. Thanks to the author: https://wall.alphacoders.com/big.php?i=1016223 Manual print instructions Print at: 100% infill Layer height: 0.08mm First layer height: 0.16mm…
Introducing a premium lightbox that took a long time to complete, featuring Ichigo with the mask from the anime Bleach alongside the Bleach logo. This meticulously designed lightbox captures the intense and iconic imagery of Ichigo's…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Lemon Yellow…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Matte Lemon Yellow…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Matte Lemon Yellow…
