Liczymy pasujące modele…
Maximize your cabinet space and keep pan lids organized with these convenient holders. Designed for easy installation on cabinet doors using double-sided adhesive tape, these holders eliminate the need for drilling, preserving your…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This rackmount adapter is designed to mount the TP-Link ER605 wireless router in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter…
Wydruk około 2,89 €–3,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This rackmount adapter is designed to mount the TP-Link TL-SG1008P switch in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…
Wydruk około 2,73 €–3,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This rackmount adapter is designed to mount the TP-Link OC200 controller in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple Resistor Cabinet with 21 slide out trays. Autodesk Inventor ipt files included for customizing. No supports needed.
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
Wall Art Silhouette model of the Ferrari F-12 Berlinetta. Adjustable size. I accept model suggestions or ideas to make.
Wydruk około 0,91 €–1,12 € nettoWstępna wycena jednego wariantu
a simple drill guide for standard 3 or 4 inch door and drawer pulls to aide in getting everything square and clean. Printed here in PET-G since it is a tool and may get exposed to heat. I made this for a bathroom installer.
Wydruk około 2,88 €–3,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simply use a power strip to attach this knob to your medicine cabinet. Easy opening and eye-caching at the same time. Printing Recommendations: 0.2 mm layer heights, no supports needed, 20 % infill, 3 perimeters. Hope you enjoy using this…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
This is a simple device for hanging your hand immersion blender, either corded or uncorded inside your kitchen cabinet. It is composed of two parts so that the hanger part can be easily remove and replaced. In this case, it fits the…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Handle to a drawer filing cabinet, it breaks easily so this is a replacement, will try to reinforce it when I catch some time Fresh design, not a scan. Share, like, post a make… my other designs…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
An easy way to mount you water cooling on the outside of your computer case. You need to print two Qube 500 EK TBE 200 Mount. They need to be mounted according to the 2 where the mounting holes are places away from the center. They can be…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fits both Vallstena and Utrusta drawer fronts for a 3/16" hole.
Wydruk około 0,71 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replaces broken or damaged ikea Ställ retaining shoe cabinet bracket pin peg. Printed at 45 angle with 5 layer walls
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
Cabinet handle Cabinet pull Drawer handle Drawer pull Furniture handle Furniture pull
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
Description The former IKEA Corner base cabinet pull-out fittings from the series Rationell tend to sag under the weight of the pots. In my case, the front corner hung more than 7 cm lower than the center bearing, and the pots slid toward…
Wydruk około 2,09 €–2,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Over Christmas break hanging out with the family, we really got into the game "L iars Dice ", so I made a nice little file cabinet for our dice, and there are magnets in the back of the drawers to keep things in place! I used 6mm x 2mm…
Wydruk około 3,05 €–3,72 € nettoWstępna wycena jednego wariantu
I printed the Small Parts Cabinet and top tray, and wanted to place my movement holder securely on top.
Wydruk około 2,43 €–2,98 € nettoWstępna wycena jednego wariantu
This high-fidelity functional replica of 'The One Ring' doubles as a sophisticated kinetic desk sculpture
Wydruk około 1,38 €–1,68 € nettoWstępna wycena jednego wariantu
My BambuLab X1CC is in the silent cabinet and I have been thinking for a long time about how I can most comfortably collect the filament poop residues ? I found a beautiful slide (thank you - erickson85!for sharing of your cool model!)…
IMPORTANT In the current orientation, the door handles will snap . Please print them on its side and with supports to improve their strength. I designed and 3D printed cabinet doors for IKEA shelves. They don't require any screws, utilize…
Credits for the origin Design to Puhsketti! I edited so it will fit Ø5x2 mm Magnets and used it as a Ring box for my engagement! Fabric Inlay: I used this foam for the padding and this fabric for the cover. I know that the sizes and the…
I've been experimenting with designing and printing thin, foldable sheets and thought of creating a small drawer organizer with the idea. Demo and assembly at https://youtu.be/KBI11ScuB-M The folded drawers end up with these "wing" like…
Want to progress your rock climbing prowess while completing simple household tasks? Transform your morning routine into a high octane test of endurance and will with a quick swap of your cabinet hardware. These cabinet knobs will add a…
Print Settings: No supports needed (as long as your printer can handle bridges fine.) Layer height : 0.32mm (you could go lower, but thicker layers will make it stronger) Walls : minimum 3-5 Infill : doesn't matter; anything >10% should…
01. Introduction This project started two years ago with the intention to surprise my girlfriend for her birthday. She really enjoys those sculptures and since I enjoy 3d printing, I thought that would be a perfect match. After way too…
Print yourself a neat Arcade Cabinet for the Switch.
Glass mount with hinge for broken or missing metal original bracket. Can be printed without support if printed the weaker way - Ironically it was designed to be printed the wrong way and now it can be printed that way without support ……
Enjoy hours of endless summertime fun while playing in the sand indoors with kinetic sand ! You can build the ultimate tiny sand castle and fly your favorite color flags on top! I included the Lego minifig in my picture to show scale. You…
A neat box with a unique opening mechanism. Follow the original inventor on Instagram https://www.instagram.com/degreesoffreedomco And visit their website! https://www.enjoydof.com I reverse engineered this model by watching this reddit…
Need more bathroom storage without cluttering your sink counter? This removable cabinet door organizer turns unused space inside your vanity into convenient extra storage. It’s perfect for makeup, skincare, cosmetics, cotton pads, hair…
I needed a holder for my Brother P-Touch H100 to mount it to the wall or the side of a cabinet. As I didn't want to drill holes into the furniture I designed it with a hook that can be attached to the side of a cabinet - or as in my first…
4 in 1 Schlüssel für Schaltschränke und Industrieanlagen. 2x 4 Kant Schlüssel, 1x Dreieck und Schaltschrank Schlüssel. am besten mit 60% oder mehr Füllung drucken für Stabilität. 4 in 1 key for control cabinets and industrial plants. 2x…
This rack holds 8 plates of many sizes.
This 4-Way Utility Key is designed for opening a wide range of electrical, utility, and service cabinets. The compact cross-shaped design combines multiple common key profiles into a single tool, making it ideal for technicians,…
This model is a continuation of my Desktop Mini Tool Box project. There are multiple variations I have created for your favorite drawer configuration. Current configurations: 4 Drawer (2 full, 2 half size) Possible Upcoming…
Designed to print z=0,2, PETG (100%infill) You can include 3 hangers if you have smaller cups. Print orientation without support:
Update Aug 20 2025 In response to comments about the fit of the threads I am now including renders with increased thread tolerance gap. You can also make custom adjustments to the fit by editing the value of the ThreadToleranceGap…
This expandable fidget toy is inspired by the iconic TNT block style from classic pixel-based games. The model is built from multiple articulated segments that expand and compress smoothly, creating a satisfying kinetic motion. The cubic…
electric cabinet key (triangle)
Wall mounted - hand driven - spring loaded - kinetic sculpture. The piece is 100% 3D printed. You won't need any bearings, bolts or nuts. I've used PETG to print the thing, but I guess nearly any material will do. I printed it with a 0.3…
I needed a few legs for a bathroom cabinet, so I just made something myself! If it isn't so well visible in the pictures, the leg is slightly angled. This leg has a height of 160mm , you can of course scale it a bit in Z but note that you…
BOM: Printed with ROSA3D Starter PLA Red Make your DIY furniture building and cabinet assembly much easier with this precise 90-degree L-corner jig. Designed specifically for standard 18mm thick boards—the most common size used in…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
You don't have a 3D printer but you need it? Buy on Etsy with Worldwide shipping → buy here __________________________________________________________________________________ IKEA spare part number 10087158 / 10082805 Fits only IKEA…
Update : there is now a version that can be mounted on the X carriage of the Prusa Mini :) Hi !! I'm a jeweler and use my beloved prusa MK3s to design invented custom tools for my craft. The visualizer challenge, encouraged me to create…
Simple cabinet door latch. I made this to help keep a loose door from swinging open. It is easy to install, just mount the catch to the cabinet door frame, then mark the mounting point for the ball. If you need some wiggle room, I made an…
Aufbewahrungsbox Küchen für Maggi, Knorr oder ähnliche Tüten. Die Box hat standardmäßig eine Breite von 17cm. Kann aber einfach mit dem Slicer deiner Wahl herunterskaliert werden auf die gewünschte Breite. :) 13cm breite für große Tüten…
BOM: Printed with ROSA3D Starter PLA Red Expand your 3D-printed woodworking toolkit! Following our popular L-corner jig, this precise T-joint assembly jig is designed to help you flawlessly connect intersecting standard 18mm boards at a…
This 3 part shoe rack is for saving space in a cabinet/closet. The inner width of the model is 135 mm, the height at the front is 84 mm and at the back 175 mm. You need to print the right and left parts with support for the pins. The top…
This is a remix. I didn't design this nice model, I've only converted it in STL and added a base. The original model and author here https://sketchfab.com/3d-models/spiral-a4e84079db884dddbc2e980b44ce8cfd kylie Printed @0.15mm with PLA:…
My Besta cabinets were anything but rigid. Aligning the doors on the front of them was next to impossible! So I whipped up this corner brace in Onshape. You probably don't need one on each corner. Even one makes a difference, but two on…
Safety lock latch to prevent young children from opening cabinets. Installation requires screws with a hole spacing of 40mm.
A lightweight spiral wind chime designed to gently rotate with the wind, creating a smooth and hypnotic motion. The shape expands into a 3D spiral when hung, giving a dynamic look even with minimal airflow. Perfect for balconies, gardens,…
Here is the file for a Rose Cabinet Pull, this is designed to take a M4 Machine screw in the back face. obviously this would be best printed in Resin but can be printed in FDM too and still gives a nice effect. 👍 I hope you enjoy. Thanks…
Grid Rack Panel 1U ventilation panel cover for 10" rackmount cabinet - Pannello di ventilazione 1U per armadio rack 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col 06/02/2025…
My take on the membrane clarinet. Only a sheet of thin plastic and a rubber band required as additional parts. I was quite impressed by Nicolas Bras' video about a membrane clarinet , and I wanted to 3d-print one completely without buying…
This is a small cabinet I created for my niece. The design should have a clean look and should provide lots of space for the tiny pieces of her toys. I've printed four boxes because of ... space. As usual I've attached the Fusion 360 file…
Mouthpiece is playable with a little sanding to the surface that mates with the reed. No cork needed as the flexible bulb keeps the mouthpiece seated and secure within the clarinet. Opening is 1.28mm (0.05 in). Minimal supports needed.…
https://imgur.com/gallery/ffFQGFu Designed for the fidget competition. A cool looking spinner with kinetic visuals. It is a fairly simple print. No support required. Printed with 0.6 nozzle in 1.5 hours at 0.12 layer height and 10%…
Use Case : needed a durable hook which could hang produce from our kitchen cabinets and also fold out of the way when not in use. I wanted a hook which could hold heaavy bananas or tomatoes without fear of breaking. Components: Hook –…
I found nothing to my liking online - blender'd my own
Drill Template for Cabinet Door Hinge installation. This has the top and bottom templates. Template for a half inch reveal as the hinges are bought for that specific dimension. Drill holes ½" (12mm) deep, 1 3/8" (35 mm) diameter. Look at…
Squeezable kinetic toy. Print in place. Designed around 0.2 layer height and 0.4mm nozzle. Should print just fine without any supports, 100% infill. Now in a different shape and at a different initial angle. This design was created with…
This jig is strongly inspired by the jig of the well known blue colored jig brand. Although they have the same properties, they are not compatible. This jig has built-in measuring scales and a adjustable edge guide for easy positioning.…
Unlike a solid prop, this egg is composed of multiple interlocking segments. With a simple twist or pull, the scales shift and expand, mimicking the movement of a living creature. The exterior is covered in layered, teardrop-shaped scales…
Modeled to be lightweight and relatively quick to print. Edited it to add some supporting beams to the legs.
This is a set of 3 parts, to double tape to your aquarium cabinet. It allows you to easily hold/access your tools. Printed mine in PLA, at 0.20mm with 0.4 nozzle
I intended this model to be mounted on the inner side of some cabinet doors (using double sided adhesive), which is most often some unused space, but easy to access. I also attached one on the inside of a drawer. Or attach 2 of them…
This is a customizer for creating arc shaped cabinet handles or drawer handles. There are two basic styles that can be created: cylindrical and spheroidal. The design is 3D-printer friendly: no supports are needed except for spheroidal…
Customizable storage solution for kitchen cabinet doors. With a modular design, they can be combined to create a storage unit that fits specific needs, and adjust it as changes are needed. Each box is designed to fit securely into the…
This is a two-piece clarinet stand which folds up so it can be stored in the bell of the clarinet inside the case. I feel that this is a strong print and I've used it with my clarinet, but obviously use this print at your own risk. Note:…
I get annoyed every time I have to deal with the Ikea Metod feet when setting up a kitchen. Every time I put them on at an angle, as well as every time I move them, the feet break off, if they haven't fallen off before. So I constructed…
After printing, this roller can be used to create a knit pattern on a soft material (like clay). I printed with PLA defaults (2 perimeters, 15% infill), a 0.4mm nozzle, and 0.15mm layers.
This can hold multiple straws without them falling over. The bottom is open in case a straw is still damp when it gets put away. I used double died tape and it seems to hold up well. Time will Tell!
Video of the build All the parts bolt together using m3 bolts, but I also used a 3D pen to reinforce the joints. I've included the step file so you can see which parts go where, as well as to modify it using your own electronics. I only…
I designed this shelf to add some additional storage space to our kitchen cabinets, for smaller spice and medicine bottles. I wanted something that didn't require drilling holes or double sided tape. The shelf has hooks that attach to the…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
For the turntable knobs and the central pin I used a piece of 1.75mm filament, so if you print at 1:1 scale you don't need to print the knob file. But if you choose to change the print scale then you can print the knob file. Printing and…
Helicone variation I created. Super satisfying spinning toy. Pretty easy to print, has no support, infill doesn't matter, 24 spinners
This K-cup under cabinet or shelf rack designed for a the Keurig k-cups. Installed with small wood screws under the cabinet, perfect size and keeps the kcups out of the way. Designed in sections of two to fit on my Ender 3 Pro and I ended…
I wanted to spruce up my bookcase doors with some nicer doorknobs, so I whipped up two different versions in Fusion. Screws in easily and grabs the scew well. I would recomend to print these with atleast 4 walls, so make sure the inside…
Serve da collegamento tra il tubo con raccordo e il rubinetto. L'ho stampato in PC ed è eccezionale, quelli in commercio sono in ABS ma dipende dall'uso che ne farete, anche in PETG potrebbe durare un'eternità. Stampato in PC con Prusa i3…
What's this? 3D printed PVC Membrane clarinet based on the plans and ideas from Nicolas Bras https://www.youtube.com/watch?v=Jk7J4_bneZo This instrument is quick and easy to print, and easy to play, you don't need any technique, just blow…
Overlay tile for the board game Gloomhaven. The large version is more like a full size wardrobe. The small version is probably closer to the correct size. Since obstacles do not block line of sight in the game I assumed they where below…
The GL-M2 5G Development Board from GL-iNet doesn't come with a case. It is meant to be a development board. They did not create an official case, and I wanted to protect my Modem. The top and bottom pieces fit together without any screws…
Kinetic visualizer pistons for a more discernibly active extruder, inspired by extruder visualizers from other designers. Reciprocating Engine built to attach to your direct dive extruder motor. Can also attach to any motor which has…
Adjusted the hole size and countersink for M5 hardware and added a peg for more stability when mounting to the Ryobi 2 shelf wall mounted cabinet…
Basic paper towel holder designed for easy attachment under a cabinet using double-sided tape. Includes Fusion 360 file for customization. Scale only the X and Y to 98%, for the left and right pin, to improve tolerance of the threads.
Here are various drawer knobs, based on my own design or inspired by existing design. Since I couldn't hold myself and create only one knob, I let me creativity running wild and ended up creating 20 different knobs! Yes some are very…
Do you keep forgetting where you've placed things? Is this driving you mad as a hatter? Try this magical cabinet solution today - or your insanity back guarantee! This design is generated from an array of squares whose vertices are…
Beautiful rose cabinet knob. This suprisingly looks good in person, especially in PLA Marble Grey by Prusament, awesome filament! Sadly, I don't posses red, so I created render for you to see how it would look like. The bottom has added…
We don't have a mantle to hang Christmas stockings on, but we do have a BESTÅ entertainment center in our living room. So, I made these hooks and used color changes to give them a holiday look. They ended up being so handy that I printed…
Some simple cabinet/drawer knobs. I added some knurling to give it a bit of extra grip and flair, in the same style I tend to use on other models . Attach them using a M4 Bolt/screw. It should, depening on your printers tuning, cut its…
USE A RAFT, or use extra glue Have good first layer Heat your bed Don't be surprised if the print fails due to warping/print comes loose.
It is a unique and mesmerizing ring box that unfolds. Printing Each part should be printed 3 times. Print at a 0.1/0.15mm layer hight and a 0.4mm nozzle for better results. Assembly Assemlbe the parts together with M2 screws and washers…
A lid holder that mounts inside a kitchen cabinet door using Velcro command strips. Can mount multiple side-by-sides to allow for storing more lids.
Just after I made the GoPro-mount for my TP-Link TL-WR902 travel router , I decided to upgrade to the Beryl AX. As I use a GoPro-mount for mounting the router at a certain occasion, I had to make a suitable clip for the new router. I…
This expandable fidget toy is inspired by the iconic disco ball shape. The sphere is built from multiple articulated segments that expand and compress smoothly, creating a satisfying kinetic motion when handled. The surface is divided…
The CUBE Rack Cube-based network cabinet / racking system with many features: Build using Standard M6 Cage Nuts (no other non-printed parts needed!) Fits standard 10" network and server cabinet equipment Simple to print and build!…
