42 modeli
Parallel Board for ISDT Discharger with 6 XT60 Ports. To discharge multiple LiPo batteries at the same time when the weather or plans change. I got two ISDT dischargers to discharge multiple batches of batteries at once. Solder all…
This is a ISDT K4 Charger Stand that clips onto the charger and holds it at a 130 degree viewing angle. It requires 4x M3x14 Countersunk Screws 4x M3 Nyloc Nuts The pictures I uploaded had it assembled with M3x16 countersunk screws. I…
Angled / Vertical Holders for LiPo Chargers from ISDT and Spektrum for a Tidy Desk Organization.
Ein Adapter Um 4x18650 Zellen anstelle von 2 Parallel zu Laden / Analysieren. Nur für den adapter wird stützmaterial benötigt... Die Sicherheitsbegrenzung für die Ladekapazität muss allerdings deaktiviert werden, da in diesen Slots max…
ISDT BG-8S Smart battery checker Screen Protector printed with PTU-92a filament. Easy to install and remove due to flexibility of the material. Temp 215°C, 0.20 mm, infill 30%
I love the iSDT Q8 charger. I also love having the parallel adapter to charge several batteries when I'm at a F5J contest. For a while I just dragged around these two with their cables hanging with one device hanging from the other. I…
The ISDT SC-608 is a lovely charger, compact and light but maybe too small and light sometimes as it can be hard to keep the thing on the table! so I designed a cradle/holder to allow it to have a little bit more surface area. Seems to…
ISDT Q6 Plus and ISDT PC-4860 1-8S Safe Parallel Board XT60 Parallel Charging Board Storage Box. Ideal charger for charging your RC batteries in the field and should fit in your FPV backpack. Storage Box should fit the charger snug and…
ISDT 608AC USB PowerDelivery adapter --- This STL allow you to change the stock AC power supply of the 608AC to be USB-C compatible over PowerDelivery specifications since nowadays everything seems to run off USB-C PD. I'm running mine…
I picked up an ISDT BattGo BG-8S Battery meter and wanted a way to mount it on the battery so I designed a case for it. This is meant for a SLM24 LIFEPO4 24V 50A 8S 1200WH BATTERY from JAG35.com…
It's a remix from Alexandr IDK (thingiverse) i just add a small hole to pass a lanyard and attached it to the checker. Post your makes!
This is a cover for Lantian 24V power supply that is used often with lipo chargers like: ToolkitRC M6 ToolkitRC M8 ISDT Q6 You can buy this power supply here LANTIAN 24V POWER SUPPLY This simple cover protects from electric shock. It was…
I made this to help protect the screen on the ISDT BG-8S, I normally store my ISDT BG-8S in my charger bag and noticed marks on the screen and wanted to protect it. Plus I thought I could mount it on the wall if need be too. This way it…
Custom-designed holder for the ISDT N8 battery charger , compatible with the IKEA Skådis pegboard . The support is secured using the T-Clip system , ensuring a firm and stable attachment without wobbling. Optimized fit for ISDT N8 Easy…
To develop the full power of the ISDT 608AC you can use an external power supply. I took an old laptop power supply (19V 120W), replace the plug with an XT60 and printed the parts attached. Be careful: The ISDT is rated from 10 up to 30…
Best Printed with TPU. PETG/PLA also possible. Quite a tight fit. You can scale the model if needed.
This is a stand for ISDT POWER 200/200H/200X series charger, which has a MagSafe compatible charger on top of the unit, other than 3 USB-C and 1 USB-A charger ports. This stand makes the charger slanted, so that it can enable iPhone…
Based on the idea of the source, I also drew an insert for my Smart Charger C4 from ISDT.
Angled desk Stand for the ISDT Power 200x 5ch charger https://isdtshop.com/de-de/products/isdt-power-200x I use this thing as a Power Station for an KVM setup as well as charging an Iphone 14Max Pro with Magsafe case and Airpods from time…
ISDT UC4 18W 1.5A 1S USB Charger Storage Container to store 4 chargers. For ultimate tinywhoop fliers. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker…
Modified kone's model to have the two adaptors joined together, should be harder to lose and more sturdy in the charger. Category: Electronics
Držák je určen k uchycení na stojánek pro modely typu F3K a podobné. Lze vytisknout buď jako celek s ližinami, nebo ližiny zvlášť a následně je přilepit. Na stojánku drží nabíječka pomocí ližin a neodymového magnetu o průměru 20 mm a…
An adapter for the ISDT BattGo to supply power from a usb-c battery bank. Requires a "PD trigger module" to tell the supply to send 20v. Also an XT60. The trigger module I used :…
This model is designed to hold ISDT 608PD Battery Charger in Gridfinity Plate , which I use primarily for charging up my batteries for FPV-Drone, and so require it always to be at the easy to reach spot :) If there are questions or…
ISDT Smart Charger 608AC Gridfinity kostenlos zum Downloaden
recommand to use pla-cf, to get better friction.
A holder for ISDT N8 charger (AA and AAA). I put in vertical to maximize space. Just 5x1 gridfinity squares. Printed in PETG, feel free to choose. Cheers.
If you own the ISDT 608PD charger, you probably know the struggle: the tiny stock fan has an incredibly annoying, high-pitched whine. It bothered me a lot, so I designed this hack to fix it. Disassembly: Please note that the original back…
The case for Dell XPS to ISDT Smart Charger Device adapter. You need: 1x Dell XPS charging port replacement (see attached image) 3x M2.5x8 screws (update: due to the unpopularity, I will update model to M2x8) 1x XT60 female connector…
This part can manage your ISDT Charger and creates room for a lot of 2S Lipos.
A holder for ISDT N8 charger (AA and AAA). I put in vertical to maximize space. Just 5x1 gridfinity squares. Printed in PETG, feel free to choose. Cheers.
This model is designed to hold ISDT 608PD Battery Charger in Gridfinity Plate , which I use primarily for charging up my batteries for FPV-Drone, and so require it always to be at the easy to reach spot :) If there are questions or…
Custom-designed holder for the ISDT N8 battery charger , compatible with the IKEA Skådis pegboard . The support is secured using the T-Clip system , ensuring a firm and stable attachment without wobbling. Optimized fit for ISDT N8 Easy…
This case protects the ISDT BG-8S battery checker without affecting the functionality. The connection between the XT-60 and the balancer connector had to be quite thin but the plugs can be inserted more than deep enough to read the…
ISDT P20 Charger Screen Protector printed with PTU-92a filament. Easy to install and remove due to flexibility of the material. Temp 215°C, 0.20 mm, infill 30%
A Case for ISDT Q6 Nano with USB-C Power! -8 round magnets 6x3mm embedded in "top" and "clip", you have to pause the print to put them in! -Solder XT60 so PD board and glue PD board in the case -Put Charger in the bot part and push the…
Simple cover for ISDT BG-8S mode of TPU http://www.isdt.co/bg-8s.html http://aame.work/2017/11/05/isdt-bg-8s-tpu-cover/ Print instructions Category: Hobby Summary Simple cover for ISDT BG-8S mode of TPU http://www.isdt.co/bg-8s.html…
Put your iSDT N8 charger up on the HSW. USB cable can be plugged into the charger while inserting/removing. The display is readable, touch buttons are accessible.
The ISDT (and its LIMETA clone) are probably the best rechargeable battery chargers on the market right now. These chargers are extra powerful, and as a result they can get seriously hot when many batteries are charged simultaneously.…
Remix of the q6 nano holder for Ikea Skadis by Leif3D on Makerworld. Replaced the skadis hooks with a multiboard push fit. Printed in white PLA, 0.2mm layer height, 15% infill and 3 walls. Rubber mallet helps getting it installed ;) Remix…
A solid bracket to wall mount your ISDT N8 N16 or N24 battery charger. I printed it with my Prusa MK4 with the standard 0.15 Speed using Jessie PLA. Use: Print two brackets and slide them on the sides, then mount the charger to the wall.
