727 modeli
The Kabura-ya Kabura-ya (鏑矢, lit. 'turnip[-headed] arrow') is a type of Japanese arrow used by the samurai class of feudal Japan. Kabura-ya were arrows which whistled when shot and were used in ritual archery exchanges before formal…
Wydruk około 2,72 €–3,32 € nettoWstępna wycena jednego wariantu
The third in the Japanese Elemental Oni series - see also InfernOni , TyphoOni , Little Sakura , Little Coral , Little Bramble Wear it or display it! Meet the OniKaze (OH-nee KAH-zay), fearsome spirit of the wind. Version from the photos…
Wydruk około 2,99 €–3,66 € nettoWstępna wycena jednego wariantu
Japanese Temple Guardian
Wydruk około 11,12 €–13,59 € nettoWstępna wycena jednego wariantu
From time to time, my Apple Watch was knocked off the charging cable by accident causing it to not completing charging. It was quite annoying as the watch would be left useless without proper charging. Hence, an Apple Watch stand is…
Wydruk około 5,47 €–6,69 € nettoWstępna wycena jednego wariantu
Two lids, spacers between them, dividers to containerize them. Rest is on you. print lid 2x. spacers work 3x for me, but 2x aint hald bad either. for 2 spacers go with 2 taller dividers, for 3 spacers 2x tall, 1x low divider worked best…
Wydruk około 3,25 €–3,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple two part variant of japanese INRO to store your trinkets. Mine holds spare key, USB key, Yubi, several microSDs, nailclipper, firesteel, olight I3T torch and small ball pen, since I tend to forget them regularly.
Wydruk około 0,91 €–1,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Školní pomůcka pro truhlářské a tesařské obory. Model po složení stojí sám. Vhodný pro Odborné a technické kreslení a matematiku. Vhodné tisknout různobarevně. School aid for carpentry and carpentry. The model stands alone after assembly.…
Wydruk około 4,70 €–5,74 € nettoWstępna wycena jednego wariantu
Japanese Wave Style box fit for pens, pencils, markers, or anything else that fits in the box. Assembled size: 95mm X 80mm X 95mm Printed on a 0.4mm nozzle @ 0.1mm (because anything larger than that does not look good, in my opinion).…
Wydruk około 4,38 €–5,35 € nettoWstępna wycena jednego wariantu
stackable storage box with japanese influence update · added STLs photos show printed in matte black pla and brick red petg-cf 0.16mm layer height 20% adaptive cubic infill no brims or supports the top section (in brick red) has different…
[Update] ---2024/05/10--- Free 3mf file released!! If you want to make multiple prints, use various 3mf for Bambu and Prusa. This is Flexi Japanese Dragon. This model is based on Japanese dragons, especially those of Katsushika Hokusai:…
Three piece lantern printable without support, the pieces snap together. Designed as a corded lamp, a candelabra base (E12) socket with metal clip snaps into the base, a standardized part which is readily available online. Multiple sizes,…
stackable storage box with japanese influence #2 update · added the STLs, including 2 new grid options (grid 2 and grid 4) photos show printed in matte black pla and brick red petg-cf 0.16mm layer height 20% adaptive cubic infill no brims…
Japanese pattern bookmark (5 patterns + STARWARS pattern) Recommended settings are : X:30mm Y:60mm Z:1mm ＜In order from the top left＞ ・Asanoha Pattern ( Nezuko Pattern from Demon slayer ) → It contains the wish for the healthy growth of…
A Japanese castle inspired tower to roll your ttrpg role playing dice. 4 seperate pieces, pre-supported, pre-painted .3MF files. The bottom 3 pieces fit together snug, the top roof piece is looser so to be removed for larger dice,…
Supports required for the bushes and roof. Great detail and easy to remove supports. "Tree supports on build plate only" Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This is my personal take on a traditional Japanese Oni mask — reimagined with a modern, stylized edge. The fierce expression, sharp horns, and aggressive curves were all sculpted to bring out that intense, demonic presence. Whether you're…
Update: Prusa XL 5T (4 Color) Multi Material Single Print project file added In my pursuit of a 3D-printable Torii, I faced a common issue – all models out there weren't quite compatible with FDM printing. They required more support…
It is ergonomic thimble (finger guard) It fits finger rather well, as it is not round in cross-section (similarly to most fingers) It has: -dimples -concave top to push needles -ring guarding somewhat from slippped needle injuries -ribs…
Enjoy this nice japan pattern
Ever since I learned about kit cards I wanted to make one of my own. I tried to fuse my love of traditional Japanese woodwork and joinery with the art of 3D printing and create a relatively flat kit that allows you to build and snap…
Supports required for the roof. Great detail and easy to remove supports. "Tree supports on build plate only" Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
I made it in the image of a traditional Japanese lantern. Necessary items in addition to 3D printer products A 60*120 piece of paper “ precisely " cut from A4 paper LED tape light Power supply Please refer to the image for how to…
This box is inspired by Japanese locking lid tool boxes. This is an ingenious locking mechanism and it is simple yet elegant. Your fitment may vary. Depending on 3D model settings and different filaments, you may have to slightly adjust…
Check out a new puzzle box here Inspired by a random Reddit post, I designed this from scratch. There was no reference so it's mostly trial and error with additional locks. Please make sure to split the file into parts in your slicer, not…
Bring the power of Japanese folklore to life with this Japanese Oni Mask . Inspired by traditional demon masks, this detailed model features sharp tusks, fierce eyes, and intricate ornamental patterns that make it a striking display piece…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Supports required for the roof. Great detail and easy to remove supports. "Tree supports on build plate only" Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Hey everyone! Exciting news – we've just launched the AnkerMake Model Platform. Here, you can access models designed by AnkerMake users themselves, as well as our latest official designs. What's more, we're currently running a model…
A Japanese shrine gate made for mothers day. Can be used as desk ornament or, if your like my mom, in the garden. Simple glue construction makes it an easy to make multi-color and print without supports. -Scalable -Easy to construct…
Update #1 I fixed the hooked top, so now the small sticks snap in properly, and I added a "candy" looking side panel. If the tolerance of the printer is not accurate enough, cut 0.2 mm from the top of the side panels. On the other hand,…
Legal Note: Ghost of Tsushima is of course copyright of Sucker Punch Productions all rights reserved. I was inspired to create my own version of a Japanese garden lantern after playing the brilliant game Ghost of Tsushima, I came across a…
This is a Lantern with swappable panels inspired by the Japanese Garden theme. The panels can be swapped for many themes : Disney, Valentines Day, Christmas, Halloween, Easter, Thanksgiving, etc. Making this a year long ever changing…
Torii Gate - Japanese Wall Art
IJN Japanese Battleship Yamato from World of Warships. Best printed at a length of 180-200mm Infill: 8 Supports: No Walls: 2 This is a stylized model by Subhunter59 and is for free use.
Japanese castle model made heavily referencing Matsumoto Castle and Himeji Castle. I chose to only model the keep as this project already took longer than expected. The model is 140mm tall and uses about 200g of filament if printed with 3…
At the entrance of many sacred Japanese shrines, gardens, etc are these Komainu “Lion Dog” statues--usually in pairs, on either side of the entryway. I took about 100 photos of this komainu at the Portland Japanese Garden, and then used a…
🇯🇵 日本へようこそ! Welcome to Japan! This was modeled by Dany Sánchez . This easy 3D print represents a typical Japanese 5-story pagoda used to store several buddhist relics, similar to the ones seen in the Hōkan-ji Temple in Kyōto, or the…
A 4-part Japanese Torii gate General: 0,2mm layer height Printer using PLA Black and Red colour Sizes: 3 pre-generated sized available to download. Main dimensions table below: Height [mm] Width[mm] Small 73 110 Medium 117 177 Large 161…
Sculpture of a japanese mythological creature - kitsune, nine-tailed fox). Designed to print without supports! Print instructions Should print without supports if your printer can do short distance bridging. The gcode works on Prusa MK3…
I experimented to find a decent solution to keep my Japanese saws on my french cleat wall, and the result is this holder. The saw coils when it is put up into the holder from the bottom. But because the holder itself hangs freely on the…
Giving full credit to the original design - this is a remix of this lantern - Japanese Garden Lantern Lamp by Keenan - Thingiverse I printed everything at .15 layer height. I did supports only on the middle section on the openings for the…
You will need to print six panel parts. Each part was printed with a 5% infill with a .2mm layer height, at 50mm/s. Tree supports were used while printing the top part. You can use any standard tealight or rgb tealight with this model.
Has your desk or Zen Garden ever been missing a Japanese castle for decoration? No more! This is not any castle in particular but meant to be a decoration featuring elements common in many Japanese castles. The model is scaled to be small…
This is a remix of Keenan's great lantern model. I separated the the cross hatch panels in order to get a cleaner print. Otherwise the model is the same. If you want the model with the socket, download the base from the original.
Design Concept The design is inspired by traditional Japanese Oni masks, featuring intricate patterns and fierce expressions to capture the essence of the mythical demon. Purpose This half face mask can be used for cosplay events,…
I really loved the design of this lamp. So I started making this model with my own personal touch. I especially wanted to add a flame effect on the entire height of the lamp. So I searched on the net to find a lamp led flame effect that I…
These Japanese styled lanterns were designed as centerpieces & table numbers for a friend’s wedding. Battery powered fairy lights were placed in each lantern to illuminate them for the event. 16 centerpieces consisting of 96 individual…
Following a request for more benches! This is a unique twist on the usual benchy. Like, download, and comment below if you want to see more models like this!
Description This 3D-printed tōrō lantern model is inspired by traditional Japanese stone lanterns, commonly seen in gardens and temple pathways. Its design is characterized by a pagoda-like structure with a sturdy base, geometric lines,…
_______________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models, future and past , become a member of my Patreon for a…
Japanese Lantern A Japanese lantern based on the design of ProgressTH, however an improvement to his original design since this does not require glue and you do not have to hold the pieces awkwardly to assemble the lantern. The lantern…
A 1:64 scale miniature hot wheels diorama of a Japanese store. Files are separated for better printing with different filaments.
Japanese Pagode Light. Use only low wattage and low heat output bulb. LED prefered. DO NOT USE WAXCANDLES!!! Use a commercially available lamp socket. Holder for socket to make yourself or pass on dimensions via a personal request. I'll…
A Japanese Berserk logo for a multicolor print
A tanto knife with a removable sheathe and customizable scales. I positioned it standing straight when I printed it to minimize supports on the blade spine. The print will have better results at slower print speeds for less wobble near…
Four little Japanese garden miniatures. I initially made these to submit in the 2023 Chopstick Holder contest [here] , but missed it by a few hours. Thought I'd post them anyways :P My printer gave me some difficulty with the tiny…
A modern version of a Japanese table lamp. Designed use a clip in light bulb socket (E12). Hardware needed to build 4x M3x15mm socket cap screws 12x 3x8mm pins 1x clip-in-light socket such as,…
Simple lantern base to hold LED tea lights, made to fit the paper lantern patterns made by Wise_Man . In addition to the lantern base you will need: 4x printed sides of your preferred pattern from the original model LED tea light (max…
Japanese Torii (Bonsai Decoration) 90mm x 120mm x 7mm the small panel is held together with double-sided tape Files : Japanese_Torii_Top.stl Japanese_Torii_Middle.stl Japanese_Torii_Foot.stl (To plant or to place) Japanese_Torii_Panel.stl…
This is a small jig to make square cuts using a japanese hand saw. After printing you can just pop the magnets into the holes. I used 8x3 mm neodym magnets like these: https://www.amazon.de/gp/product/B007KZGADE. They give great support…
Add a sleek and minimalist touch to your decor with our line art wall decoration, featuring a classic Japanese car. This piece highlights the iconic design and smooth lines characteristic of Japanese automotive craftsmanship. It's a…
This lantern is a unique creation that can be assembled without the need for any adhesive and can also be easily disassembled. The primary objective of this project was to provide enthusiasts with the opportunity to incorporate their own…
Regular hexagonal coaster from Thingiverse (by YewShmz) with traditional Japanese pattern called "Asa-no-ha(麻の葉)".
Buy the full version on Cults3D! Visit my store for paid models! https://cults3d.com/@1xmerch Explore the iconic skyline of Tokyo with this meticulously crafted 3D model, designed for seamless 3D printing. This urban landscape captures…
Supports required for roof. Great detail and easy to remove supports. "Tree supports on build plate only" Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This 3D printable piece features identical geometry on both sides and is designed to be printed twice using model 'A.' Whether used as a standalone piece or incorporated into your projects, it delivers exceptionally satisfying and…
Made the temple base one solid object for easier printing, added some decorations to the sides, a sun image in the centre and a small step at the front. This can now be scaled up or down as required and printed without supports or rafts.…
A case to organise your loose 10, 50, 100 and 500 Japanese Yen coins. It holds up to five (5) of each denominations. Any loose 1 and 5 yen coins can possibly be stored in the slot between the 10 and 50 yen coins. Decided to remix the…
Can you solve this 3d puzzle? It consists of 51 parts. In original size each cube has an edge length of 2 cm (little smaller because of some tolerance), so the whole puzzle is 22 cm long in every direction. Difficulty: Medium Print…
This is a remix of NilsDougan's very cool coaster laser cutting patterns (thing:2821011) adapted to work with FDM printers. The STL is scaled to 4in (101.6mm) sq by 2mm thick. Print instructions 0.2mm 50% infill Avoid standard PLA if…
This beautifully crafted, Japanese-inspired uchiwa hand fan is a perfect blend of tradition and modern innovation. Designed with the elegance of classic Japanese art in mind, the fan serves both as a functional tool to keep you cool and…
This model is for personal use only. Do not sell this model or prints of this model. For licensing this model to print and sell, shoot me an email at [email protected] If you make this and post it on social media, state it was made…
Supports required for the roof. Great detail and easy to remove supports. "Tree supports on build plate only" Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Japanese Settlement and City pieces for Catan. I did not make a Japanese road part preferring to use the ones already available on Printables.
resolution : 0.2mm infill : 20%
A keychain with japanese Honda text.
I recently used a knurling inspired by a traditional Japanese pattern called bishamon kikko and thought that the pattern resembles interwoven hexagons and could be printed as a ‘fabric’ I haven't seen before. So I ended up doing that……
Hello everyone, I’m P1lotz , a professional 3D artist from Scandinavia, and I have been working in this field since 2019. This time, I have chosen to design a Japanese-inspired dragon! The body moves freely around ✓ The legs move up and…
Luciagar's cute Japanese garden book nook from Thingiverse. See the Thingiverse page for more information including sources that Luciagar remixed!
Chopsticks holder with Japanese symbols - Mount Fuji, Bonsai, Torii gate, Rising red sun, Katana holder You can print the relief in one color or in multi-color, I added g-code for multi-color printing You can find another Chopstick holder…
Nice designed Japanese table model fot your scale model or bonsai sdtand table. Please do not forget to take a look tot my other models and Like them if you download them. Other sites on demand.
RC Car 1:10 Japanese License Plate (Editable) Available for download Takumi Fujiwara version You can customize your own on the link: https://www.tinkercad.com/things/4SoAYkRUpKw Print Settings Printer Brand: Creality Printer: Ender-3 v2…
The No Bearings, No Glue Triple Gear Spinner is a mechanical fidget built entirely around gears — no bearings, no adhesives, no extra hardware. Three helical-toothed rings — two in red, one in black/grey — interlock into a spinning knot,…
print two sides, front and back lying flat on the bed with the pattern down. Insert the sides and back as far as they go for assembly, making sure the back is in the back and not one of the sides, then slide on the lid and front. Some…
Kitsune Japanese Mask earrings/pendant. To have the double face, just print 2 per ear and glue them together. Category: Earrings
It was necessary to replace 2 wall sconces in the room of my daughter who is passionate about Japan. I did some research on the internet and I found a model on an online sales site. Rather than buy it, I decided to model it and add my…
Scale 45 x 50 x 80mm This is the Japanese version of Shirakami Fubuki's mascot character Sukon-bu (Su-Corns) for her native viewers. I decided to add a little more personality and modeled it balancing on a burger to fit with Fubuki's…
The display stand for my set of decorative Japanese swords broke, so I copied the design to make a new stand. To make it visually interesting, top and bottom layer counts were set to zero, showing off the gyroid infill pattern. Note that…
This is a Portable Coin Wallet/Holder for Japanese Yen It was made by holding coins one by one. Therefore, it is easy to use if you insert it one space at a time from the bottom. Hardware Mainly M3 series bolts and Standoff Nuts are…
Kawai Tsugite is a fascinating and relatively modern woodworking joint. It's named after its inventor, Professor Naoto Kawai, and it's unique because it allows for the connection of wood from three different directions: horizontal,…
I designed a Kumiko pattern and a matching frame that does not require multi-color printing — a single filament color is enough. You can choose any color scheme that suits your style. The project includes 3 files: the Kumiko pattern, the…
Soap or brush dish. I made a version with more bubbles ond one simpler one. In my opinion gold and black looks decent, but I am curious for other creations
Bonsaistand 02 - of miniature table - modelbuilding equipement. Other sites on demand.
✨ Welcome to My Printables Page! ✨ Thank you for stopping by! I put a lot of care and detail into creating this model, and I’m excited to share it with you. Each design is made with both function and aesthetics in mind so you can enjoy…
If you like the design, please consider tipping on Ko-fi . Thank you! :-)
Easy assembly with no glue required.Side panels must be printed in a separate transparent filament.
a joint that allow straight and two 90° connections. Contact faces made with clearance and slight angle for snug fit.
A cute fox I sculpted for my Game Environment Artist Demo Reel. Print with supports. I will add the base for the statue soon. The Demo Reel I made it for if you are interested:
A Saisen Bako is a large wooden coin box, commonly seen in Japanese shrines just in front of the spot where people stand to pray. The design allows for coins to be easily tossed in, but tough to get out. This is a money-box sized version…
