Liczymy pasujące modele…
Reparaturteil des originalen Auslösehebels für die Füllstandsanzeige des Auffangkorbes. Etwas verstärkt im Vergleich zum Originalteil. Empfohlenes Material: ABS oder PETG. (PETG hielt zuletzt ca. 3 Jahre bei häufigem Gebrauch des Mähers)
Reparaturteil des originalen Auslösehebels für die Füllstandsanzeige des Auffangkorbes. Etwas verstärkt im Vergleich zum Originalteil. Empfohlenes Material: ABS oder PETG. (PETG hielt zuletzt ca. 3 Jahre bei häufigem Gebrauch des Mähers)
If you experience issues with oil seeping through the spindle seals on your John Deere 110TLB, the issue may be pressure building as the oil warms up. This is especially problematic during winter when the tractor operates in freezing…
John Deere 3020 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A single M1x6mm screw…
After some time designing and field testing, here we are! 02/24/2026 UPDATE: Added low rate yellow meter. I printed these in TPU 95A: 6 perimeters 30% Cubic infill Check “Avoid Crossing Perimeters” to ensure no stringing and a smooth…
Disclaimer: This is a part of a blog post I am currently writing up. I have not tested this yet but once I have, I will update this model to reflect this. I have created this three switch panel that enables 12V accessories to be attached…
an updated john Deere styled hood for openrc tractor mk3 from wekeas original version (https://www.myminifactory.com/)
Demijohn stopper - 50 mm inner diameter, you can scale for your needs
Tested and printed without issues using Cura slicer. This 3D model is a stylized low-poly interpretation inspired by CJ’s appearance. It is not an export or conversion from the original game, it is an original, from-scratch creation that…
This is another version of my old model but with better joints, and the model is updated, with the newest forsaken model of John
Credit to Mr.Make_it for the base body
🇫🇷 Présentation – Lampe John Deere Ajoutez une touche rustique et emblématique à votre intérieur avec cette lampe inspirée du célèbre logo John Deere. Le cerf bondissant, symbole de puissance et d’élégance, est mis en valeur dans un…
John Deere 3020 NFE (Narrow Front End) - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A…
This is the Gasharpoon skin for John Doe that originates from Limbus Company turned into an action figure.
Another great ornament for any season to honor Christ!! John 14:6
3D printable topographic miniature of St. John's - 🇨🇦 Canada Capture the beauty of St. John's 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 47.565, -52.704…
John Deere 4020 NFE (Narrow Front End) - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A…
Ornament of what Christ said. He is the Bread of life!! John 6:35
This is a decoration for a shelf, home, apartment or a motor home. if your name is John!!!!
This is a decoration for a shelf, home, apartment or a motor home. if your name is John!!!!!
I saw a similar design on facebook reels and modeled my own design after failing to find it on the internet. The device attaches to the collar of the CSM and helps keep the yarn from rising up on the needles and possibly causing missed…
Take your WeCreat Lumos laser engraving projects to the next level with this custom koozie jig , designed specifically around the Johnson Plastics Plus leatherette koozie (see stock number in photos) . This jig helps you achieve accurate,…
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Licensing 🔹 Personal Use: You may print and display this model for your own enjoyment. 🔒 Commercial Use…
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Licensing 🔹 Personal Use: You may print and display this model for your own enjoyment. 🔒 Commercial Use…
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Licensing 🔹 Personal Use: You may print and display this model for your own enjoyment. 🔒 Commercial Use…
Charles John Huffam Dickens – Buste Description (FR) Ce buste de Charles Dickens rend hommage à l’un des plus grands romanciers de la littérature anglaise du XIXᵉ siècle. Il est inspiré de la photographie la plus célèbre de l’auteur,…
John Deere‑Inspired Decorative Lamp – 3D Printed This 3D‑printed lamp is inspired by the iconic style and colors associated with John Deere agricultural equipment. Designed as a tribute piece for fans of farming culture, tractors, and…
Novabeast avatar the pose of Johnny Joestar and Gyro JoJo pose
To make the 4020 1/64 scale, start by scaling it down to %12.5 (in mm) Here's a link to the 4020: 4020 Tractor
Tested and printed without issues using Cura slicer. This 3D model is a stylized low-poly interpretation inspired by CJ’s appearance. It is not an export or conversion from the original game, it is an original, from-scratch creation that…
Johnny Hallyday (Jean-Philippe Léo Smet) – Buste 🇫🇷 Description (Français) Ce buste représente Jean-Philippe Léo Smet , plus connu sous le nom de Johnny Hallyday, inspiré de la photographie la plus populaire de l’artiste à l’âge mûr, où…
This is the model of what everyone thinks is under that shirt of Dwayen's. this was made in blender and it is my first model I've ever made and posted. enjoy freaking out people with this as a gift or gag or to watch over you while you…
John Fitzgerald Kennedy — Buste Français Ce buste représente John Fitzgerald Kennedy, 35ᵉ président des États-Unis et figure marquante du XXᵉ siècle. Inspiré de la photographie la plus populaire du dirigeant, le portrait met en valeur un…
John Deere 48 Front Loader - 1:8th Scale Made to fit the 3020 and 4020 tractors I have modeled. Uses M2 and M4 Screws. Indents indicate where holes need to be drilled out. Would love to see pictures of your makes!
John Deere Rear Wheel Rims - 1:8th Scale Made to fit the Scale Models 1:8th scale tractor. Will also fit the 1:8th scale John Deere 4020 and 3020 models I have available. However, since the rims needed to accommodate the OEM tire, there…
John Deere Rear Wheel Rims - 1:8th Scale Will fit the 1:8th scale John Deere 4020 and 3020 models I have available. These can be used to replace the Scale Models 1:8th scale 4020, but the OEM tires may not fit properly. Files included in…
Mount to put behind 4640 screen in John Deere tractors. Installed by unscrewing 4 screens in the back of screen and sandwiching mount between JD bracket and screen. Have printed in 6 outerwalls and 35% infill. Works great.
I printed the latch with PETG. I printed it on its side to give the layer line orientation the greatest strength at 30% infill 6 perimeters. GCODE with those settings attached.
Turns out clean, may need to size up a bit if the text doesn't come out clear enough but it looks good enough for me. I used 15% infill at 0.16mm, I'm sure you could get higher detail with other settings. Also printed on the Creality…
The Tires and Rims Are from Eli Conrad (pictures will be added soon)
There are two variants of the JX-75, early and late. This is a replacement propulsion drive pulley for the early series machine, JD part number AM107567. 3-1/2" outer diameter, 10mm shaft, 3mm key. (The newer version uses a 4" drive…
First Blood - John Rambo - 1982 3D printable model. Prints in two parts. the figure and the base.
Very funny model of Dwayne "The Rocktopus" Johnson. Multiple size variants so there is something for everyone. Please make sure the print bed has been cleaned before printing. If you have problems with adhesion, you can also print the…
Hueforge 4 couleurs Extra fine 0.08 - Buse 0.4 mm 1ère couche 0.16mm - Hauteur de couches 0.08mm - 2 parois - 100% remplissage Type de bordure : extérieures uniquement - 5 mm Ecart Bord-objet : 00 mm Commencez par le noir 0.00 - 0.68 Noir…
Creola Katherine Coleman Johnson — Buste Ce buste rend hommage à Creola Katherine Coleman Johnson, mathématicienne de génie dont les calculs ont joué un rôle essentiel dans les premières missions spatiales américaines. Figure majeure de…
This is an accessory for the Cafelat Robot Espresso Maker. It is used to make the arms more comfortable when pulling a shot: Here is a link to the Cafelat Robot Espresso Maker: https://www.cafelatstore.com/products/robotpowdercoating The…
A bold Johnny Bravo-inspired figurine made in a detailed 3D printed style, featuring the iconic oversized pompadour, sunglasses, fitted black shirt, and exaggerated muscular pose. This playful collectible brings strong retro cartoon…
Presenting Rambo's Knife from Rambo: First Blood Part II The model is printed in multiple parts, no painting necessary aside from the blades (stencils Included to help paint the pattern). ALL MANNIKS3D designs are protected by Copyright…
Bring a piece of cinematic legend to your ride with this John Wick "Boogeyman" hitch cover. Featuring a detailed design of John Wick holding his pistol, this piece captures the intensity and presence of the legendary assassin. The top…
The Johnny Carson Show - Ed & Johnny - 1962 3D printable model.
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
Unleash the ultimate action hero on your desk with this incredibly detailed 3D printable figurine that captures raw power and intensity in every sculpted muscle! This muscular warrior statue showcases exceptional craftsmanship with clean…
Unleash the ultimate action hero on your desk with this incredibly detailed muscular warrior 3D print STL model that commands attention from every angle. This powerfully built figurine showcases exceptional muscle definition and heroic…
Unleash the ultimate action hero on your desk with this incredibly detailed muscular assassin 3D printable STL model that captures pure intimidation and strength. This powerfully built figurine showcases massive proportions and classic…
Stylized John Wick figurine wearing his iconic suit and holding dual pistols in a confident action pose. This model captures the cinematic essence of the legendary character, making it a perfect collectible for fans and a standout display…
Demolition Man - John Spartan - 1993 3D printable model.
The Ghost Rider - Johnny Blaze - 2007 3D printable model.
The Hitcher - John Ryder - Rutger Hauer - 1986 3D printable model.
A 3D printable matrix ball guide for the Johnny Mnemonic pinball game. This is a commonly missing part on Johnny Mnemonic pinball games. The original is made of stainless steel. This is a close facsimile I made by looking at photos and…
The Beatles - George, John, Paul and Ringo - 1960 3D printable model.
A very simple model of wheel for the mower unit for John Deere 415. After extended testing, I find that the model is not resistant to sharper stones, but durable enough to last one season. You may want to increase wall loops or add TPU on…
This is a front wheel replacement for the original Sabo Mowit 500f/John Deere Tango E5. I found the original too expensive for a wheel that wears out to quickly because of non existing ball bearings. This design contains 2 ball bearings…
The .gcode is already cut in half and placed in the most optimal print position. The .stl and .step are left whole in case you want to use them elsewhere. Happy Printing!
This insert for John Company 2 completely replaces the thermoformed insert supplied with the board game. It was designed to be as light as possible, weighing no more than 500 grams (I don't like inserts that are too heavy :) ). It…
As Mr_Clever_Coyote states in the description of his original design, this reduces, or at the very least, redirects the sound coming from the 60mm fan of many 3D printer PSU's. This part will also improve a 3D printers aesthetics IMO, and…
made with freecad sorry i dont have a picure for it no one will use this. it is not all the way finished because the bolt that holds it does not fit so i need to refine it have a nice day
Print settings 100% infill 4 perimeters 0.05 first layer because of adhesion
Print settings 100% infill 2 perimeters 0.05 first layer because of adhesion
K1/k1 Max Drag Chain delete Tool Head side. I give you Tool Head Johnson. Removes drag chain from tool end repositions the cable and tube upwards, instead of stock sideways. fits under risers too at homing unlike overs. this will be part…
15% 3D honeycomb fill 0.1 layer height
print and then screw into base leaving a gap between the head of screw and Dwaynos head, make sure the screw head is just slightly larger than the hole in the crocs, push the screw through the hole and TADA Dwayne the Croc Johnson
Statue of St. John Nepomucene (of Nepomuk), protector from floods and drowning. The last few days have been disastrous for a big part of central Europe. Heavy rains across Austria, the Czech Republic, Poland and Romania turned the streams…
John Wick silhouette intented to be fitted in a photo frame. Fits on a Prusa Mini+ bed. Gcode file included with a (very) long ironing process for the top surface.
The Rock? A Christmas Ornament? So I wanted to try out Meshmixer for the first time and thought this would be a good start. This is 'Little Mitch' from Baywatch 2017, whilst the actual film was, erm. Yes. This little character addition…
This lightbox features the iconic Dick Johnson Racing logo, paying tribute to one of the most celebrated teams in Australian motorsport history. A perfect addition for racing fans and collectors, it brings the spirit of the track to life…
Doctor Who Ornament - St John Ambulance and DW Logo, Christmas Ornament. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: 0.1/0.2/0.08 Infill: 20 Notes: I printed this with the DW logo down on the…
Portachiavi da montare. Rappresenta il nuovo logo John Cooper Works.
Brad Johnson From Accounts Receivable. But his friends call him Phineas. Very popular at office parties due to the fact that he has a pipe dissecting right through the middle of his head. Its become somewhat of an initiation right for…
AstroX Johnny_FPV Foxeer Lollipop & Diversity Antenna Mount Message me if you'd like one printed. Please visit my Instagram at https://www.instagram.com/thefpvgeek/ for more designs and other related pics. Category: R/C Vehicles
