Liczymy pasujące modele…
Sidepanels to protect your legs/boots from excessive rain spray. I designed a simple "slide-on" panel. Only the bike plastic covers under the seat should be somewhat loose or removed to install. The version in the photo has an extra…
Enclouse for the FFBeast, you can print my holder for the MKS xDrive Mini, make your own plate or use a modded version of the “Original” case Require: 150mm Shaft (Put together as 100mm and have 25mm on each side) 12x M5x20 12x M5 Nuts…
I bought MAIWO K1689 M.2 NVME/SSD Neclosure to USB-C to be able to connect a NVME board via USB interface. Then I promptly lost a silicone plug it came with it. This is the replacement. This plug will also fit any mount hole that is 4.5mm…
Supporto per fissaggio cam. Si fissa sulle viti esistenti di fissaggio del cupolino BMW K1600 x tutti i modelli gt gtl B
https://www.etsy.com/shop/meakerarms Thank you for your support. After way longer than I'd intended, I'm pleased to present the: Meaker Mk16 Flywheel Blaster A solenoid-driven flywheel powered small/medium blaster with a built-in stock…
Tried to find a 3u spacebar model to modify my Darmoshark SK16 macropad and couldn't find any, so I modeled and printed this myself. Might fit other keyboards that need a 3u spacebar too, but I don't have one on hand to test. Printed on a…
This mount for the Kulp Lights K16A-B v3 is a remix of the mount by jlange . This has been modified to better fit the v3 version of the K16A-B Use 5x M3 x 12mm screws to attach the K16A-B to the mount -…
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell). The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only…
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for Meanwell LRS 350. This will hold 2 PSUs and removes the need for an extra mount setup for stacking the PSU's The design has a in-cut on…
Mount that will work with the V4 series of Kulp Lights K16. Will work with all three versions standard (K16), Pro and Max.Mount that will work with the V4 series of Kulp Lights K16. Will work with all three versions standard (K16), Pro…
This is a support for Xdrive Mini attach to SK16 in hover Sim Racing DIY - This project is for compact base.
I designed this mount for the Kulp K16A-B controller with a BeagleBone Green. I added the slot in the left side for a MicroSD Extension Cable. I used M3 bolts to secure the mount to an enclosure mounting board. I used #4 x 3/8 screw to…
Mount for the Kulp K16A-B with additional supports for the BeagleBone Black and various points on the board. When the mount is not screwed down you can still easily access SD Card. With an SD Card extender you could get to it mounted…
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell). The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only…
The flip hinge on my parents skillet broke and my dad asked if I could make a new one. This was printed in ASA and since it was mainly all on outside, I don't think there will be an issue.
A switch/button guarding lid to prevent from pressing onto your TK16 V2 accidentally
Tištěno z přírodního PETG Aurapol na Bambulab P1S. Variabilní výška vrstvy, primární výška vrstvy 0,16mm - kavalita/rychlost 0,20, rádius 5. 5 perimetrů, 6 horních a 6 spodních vrstev, 100% infill - u všeho koncentrický vzor Tištěno s…
Vacuum cleaner adapter for old saw NAREX EPK16.
Dropping the heavy BMW K1600GT is almost inevitably. I would hate the scratches on the crashbar , so designed a clip on "basic protector" I will let you know if they are adequate for the basic drop ! Printed on my core one L in PLA…
The indicator light hole diameter is 9 mm. Top lid diameter is 10.5 mm.
Endcap for Fenix TK16 v2.0, with opening for lanyard. To prevent the light from turning on during transport. Added a second version which can be attached to the lanyard.
Redukce na vysavač pro přímočarou pilu Narex EPK16D
A simple replacement for USB-C plug enclosure for Dell TB16 docking station. I've never seen the original one, when I bought my two stations they were already broken, but after spending few minutes with caliper and Blender, here it is!…
This is a support for Xdrive Mini attach to SK16 in hover Sim Racing DIY - This project is for compact base.
Dropping the heavy BMW K1600GT is almost inevitably. I would hate the scratches on the crashbar , so designed a clip on "basic protector" I will let you know if they are adequate for the basic drop ! Printed on my core one L in PLA…
Sidepanels to protect your legs/boots from excessive rain spray. I designed a simple "slide-on" panel. Only the bike plastic covers under the seat should be somewhat loose or removed to install. The version in the photo has an extra…
Mount for the V3.0 Kulp k16 board. Have a different board revision, look through my other models for the right version.
Based on the design of Harryjames' Quad Lock mounting plate for K1600, I've tweaked the design to make it stronger for use with heavier devices like tablets. Requires an M8 socket head cap screw with approx 35-40mm of thread, an extra…
Upgraded version of my previous RAM mount that hooks into the original navigation cradle to allow for heavier items to be hung off the RAM ball. Same hardware required as the previous version, with the additional requirement of 4x M6x35mm…
Going to rainy schotland I designed some glove rain protectors for extreme rain Sounded like a fun challenge to design. Tested on German autobahn speeds and latest 2000km trip without issues. Printed on pruse CoreOne L 0.15 layerheight…
Stand for Framework 16 laptop to hold it with the GPU module facing upwards. Designed so all overhangs are arches and can be printed without supports. I find I need to print with at least .2 mm layer thickness for this to work. Anything…
DE: Adapter für Metabo TK 1685/1688 Tischkreissäge auf Werkstattsauger mit 35mm Anschluß (z.B. Starmix). EN: Adapter for Metabo TK 1685/1688 table saw to shop-vac with 35mm connection (e.g. Starmix). Print Settings Printer brand: Creality…
Litle piece that lock the top case of a BMW K1600 If you wana sell this piece just DM me
3d printed wheels and i might make the full suspenion in the future
A small tool to hold the needle bearing for installation in the hot engine case
Oil cap for Black and Decker GK1630. Just add some rubber sealing on the bottom and you are good to go. My printing setting: Layers - 0,2mm QUALITY Filling ~30% No support needed
MK16 barrel nut for airsoft use. Modelled after HAO's MK16 barrel nut https://www.haoptwart.com/product-page/hao-mk16-barrel-nut and made some minor cosmetic tweaks to make it print easier. Knurling makes it slightly easier to hand…
