Liczymy pasujące modele…
This is a cover to get rid of the harman kardon emblem reflection in the windshield (but still make the h/k logo slightly visible). I printed it out of TPU on top of blue painters tape, which gave it a matte surface finish (and it…
I used PLA dark wood filament it's good with my older HK ONYX Studio finish. Print upright as it stands, organic supports result in just some help with the low bridging. Draft mode for printing seemed fine because it's curvy - 15% infill…
Stand for a Harmon Hardon Onyx Studio 1-4 with broken legs. if your screw posts are broken this is the answer. it centers on the bottom edge of the speaker and the cutout where the factory legs were. its a little slippy so some tpu added…
Harman Kardon Go + Play 2 rubber feet replace print with TPE or TPU thats all.
My Harmon Kardon Onyx Studio 4 fell off my car and one of the legs broke. Instead of just making new legs I decided to make it better. I designed a grippy handle that doubles as a stand (two position) I printed this out of TPU with 10%…
Works perfectly for HKTS7 Speaker, fits maybe also other models. The model is designed to be printed as one piece. As this is a very tight fit you may need - I guess depending on your printer - to use a scalpel to split the pieces. The…
A cover to place over the Harman Kardon logo on the soundbar of the Volvo EX30. This helps to prevent the highly reflection that comes with the standard logo from the factory. Gently push the cover to fit tight. No other materials are…
The original knob was too big for my speaker. The volume knob stub on my speaker is 6mm diameter, so I took the original design from DivePADI and shrunk it a bit in order to retain the original geometry (which is very nice, thank you).…
Wall mounts for Harmon Kardon Soundsticks. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16 Infill: 25% Filament: eSun PLA Pro White Notes: Give it a few extra walls just to make sure it…
I wanted a neat way to mount these normally surface-standing Harman Karden speakers on the wall and I came up with this. These are to fit the now very old BDS 2 speakers but may fit others. My print settings: Material: PLA Perimeters: 4…
Harman Kardon reciever cover | Harman Kardon zosilňovač krytka If you like this model, give it a thumbs up :)
A wall mount I designed to attach the base of the Haman Kardon Citation 200 to the back of my desk. It prints in 2 parts and you glue them together. Designed in onshape if you want to modify it:…
A cover to remove the Harman Kardon reflection in the windscreen. Not quite a push fit, so use a bit of tape to hold it in place. I printed it in PA-CF.
I created feet rubbers for my harman kardon GOPLAY speaker to replace it.
adapted from original on Cults3d.com JTNINETY
Since I often forget to charge my Harman Kardon FLY ANC Headset so that they are, even with the nearly 20h runtime, empty in the least favorable situations and I've long envied the gaming headset with the charging docks. So I've made my…
This is a replacement foot for the Harman Kardon Rabco ST-8 linear turntable. While the original used a "knurled" rubber band, the replacement has the knurling modeled into the part, as the rubber part is hard to find. Print in your…
A wall mount for the Harman Kardon CEN TS20/30 center speaker, the center channel from the HKTS 20 and HKTS 30 5.1 systems. I couldn't find a bracket for it, so I made one. I modeled it last weekend, and it's currently mounted to my wall…
Harman Kardon Citation Amp spacer for the rubberfeet to get more airflow Take of the rubber feet from the amp, place the spacer in its place, glue back the rubberfeet on the spacer. The glue on the rubberfeet should still be functional to…
I have designed this for home cinema to mount up some harman kardon rear speakers. Because with the original brackets, the speakers can not be aligned to the upper wall ... This is important if you have small rooms with tiny space between…
I created feet rubbers for my harman kardon GOPLAY speaker to replace it.
A cover to remove the Harman Kardon reflection in the windscreen. Not quite a push fit, so use a bit of tape to hold it in place. I printed it in PA-CF.
A cover to place over the Harman Kardon logo on the soundbar of the Volvo EX30. This helps to prevent the highly reflection that comes with the standard logo from the factory. Gently push the cover to fit tight. No other materials are…
I made this adapter to allow me to use my Harman Kardon AVR 135 speakers with a Modular Mounting System (MMS) foot such as this one: https://www.printables.com/model/306901-dnl-larger-base-for-modular-mounting-system It is also compatible…
It is an adapter to mount up a "Harman Kardon" center speaker to an Harman Kardon tripod. I have sanded the suface and painted it with acrylic spray for a few times. Category: Audio
Bracket to mount Harman Kardon Center Channel to wall and hide wires
This was designed to isolate and space the pins of the bigger diodes to the smaller 2W06M pinout on my Harman Kardon HK980 Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0,2 Infill: 20 or whatever…
A base I designed to get my left & right speakers on the same height. Category: Audio
Computer speaker knob replacement. Print Settings Printer: Monoprice Mini Select v2 aka Malyan 200 Rafts: No Supports: No Resolution: .1 Infill: 100 Notes: Because it is small, I used 8mm brim to keep it stable during printing. How I…
Remix from aRGiRob ´ s fire tv remote holder . Now you can use it for Harman Kardon Remote instead of fire tv.
I lost the knob to my old Harmon/Kardon 2.1 desktop speakers years ago, now that I have a 3D Printer I thought it was time to replace it. This is a very simple knurled cylinder knob (brushing up on/learning Fusion 360) that just slides…
Needlessly complex and highly specific mount for harman/kadron satellite speakers. The mount can pivot around with ease. Rate comment and subscribe If you find this useful or entertaining enough, tips are welcome. :) Print Settings…
A friend needed some of these to repair HK930 receivers. I printed it from clear red PETG: https://www.amazon.com/dp/B08MTLST3J
A normal Harman/Kardon GO+PLAY has a very smal battery but the battery from a JBL Xtem fits plug and play in the HK music box. The battery from a JBL has 5000mAh but you can find som batterys up to 6200mAh. Original the HK has only…
Harman Kardon Soundsticks Clamp Holder for desks with 2cm to 4cm thickness. Print on the long side - only tree Support on the rounding needed.
