Liczymy pasujące modele…
This is a collapsing Katana sword designed to be printed as one part. Its only 182mm high when printed but expands to over 825mm in total length! The Replaceable Single Edged Curved Blade Version is available to my Clubs members. Supports…
Wydruk około 10,75 €–13,14 € nettoWstępna wycena jednego wariantu
This collapsing Katana is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
Wydruk około 5,42 €–6,63 € nettoWstępna wycena jednego wariantu
A remix of 3D Printing World 's Collapsing Katana except I removed the robot logo on the bottom of the katana.
Wydruk około 7,89 €–9,64 € nettoWstępna wycena jednego wariantu
Couldn't find anything as nice as I wanted so remixed some existing stuff on TinkerCAD. Fits the original pistols perfectly (maybe other stuff too who knows) and I believe it would fit most swords available too. Pictured is the Katana…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Put the Blades (Biggest → smallest) in the “opening”. Close the “opening” with the cover with Glue The individual Blades might get stuck inside of the other, but can be pushed back in the Handle with a little bit of Force.
Wydruk około 4,16 €–5,08 € nettoWstępna wycena jednego wariantu
This is a katana for Dummy 13. It is about 90mm long and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out this remix done by DrunkenGlitchy for a more well defined guard!…
katana s desingem Naruto
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This katana prints complete all as one piece, the files are split for multiple color printing with a AMS or MMU. The Replaceable Blade Multi-Color version is available to my Clubs members. Supports are not required, for best results use a…
Original Model by Mr_Andre https://**********.com/en/models/1033319-stainless-katana-sword-print-in-place#profileId-1016589 Design Concept This red column features a unique stackable design that can serve as an intriguing display piece or…
This remix of the original Banana Katana introduces significant improvements for enhanced functionality and stability. The original Banana Katana model features a banana that unfolds into a long sword. In this remix, the model has been…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This is an evolution of my original Collapsible Katana design with a some improvements: The kissaki is now included as part of the innermost sword section, which means no assembly is required to print it. This results in a much cleaner…
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Das Katana ist insgesamt ca. 910mm Lang und der Griff ist ca. 210cm hoch. Wenn ihnen das Modell gefällt bitte nominieren. Veröffentlichen, verteilen,…
Infill, 20% a new version https://www.printables.com/model/752394-dummy-13-katana-holster-v2 holster v1 and v2 require minimal support V3 requires no supports
This version of the single edge curved blade collapsing katana prints in place all as one part. The Replaceable Blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…
katana s desingem the witcher na hraní či na dekoraci
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Veröffentlichen, verteilen, verkaufen oder handeln Sie die Dateien oder physischen Modelle dieses Objekts nicht.
Update 23. Dec. 2023: Problems in the Cura Slicer have been fixed Update 11.Nov.2023: Added additional parts and variant + Katana Based on DUMMY 13 Beta - Oct. 2023 Get your Dummy 13 here: /model/593185 I designed this part to create…
For little makers. Need some magnets and glue. Second thx soap warrior! Category: Toys & Games
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
Modified blade to be thicker With the original blade model, the blade pieces kept breaking whenever I swish-flicked it open because of how thin the walls were, both in PLA and PETG. So I increased the width of the walls of the blade…
katana bez loga
This katana prints complete all as one piece, the files are split for multiple color printing with a AMS or MMU. The Replaceable Blade Multi-Color version is available to my Clubs members. Supports are not required, for best results use a…
A simple bookmark that shows the famous katana on the outer face and which uses a fin to separate a book's pages. An easy, fast print. The bookmark works best on paperbacks but it can also accommodate hardcovers by simply pulling the…
There is two versions of this katana. The first (v1) use one 5mm metal rod to solidify the blade, the second (v2) use two 3mm metal rods. There is two versions of the scabbard. The difference is the position of the kurikata (the little…
Wanted to make some probably decently proportionate katanas.
Title says it all. I've optimized the size for the bed of the Prusa Mk3. As it was too big at first, I made it modular for printing at the maximum size. I've also included a smaller one that can be printed in one go. The legs and body are…
2 Katanas and a holster
Sword stand for Japanese Katana. Holds a single sword. Printed with Proto-Pasta “Empire Strikes Metallic Black” HTPLA. Everything just snaps together, no glue or screws required. Tolerances are tight, so some very light sanding might be…
Deadpool Collapsing Katana (Print in Place)
Is now tighter
Model of the Mandalorian Kom'rk class (Mark 3) spaceship from the Mandalorian. https://starwars.fandom.com/wiki/Kom%27rk-class_fighter/transport The Wings can be rotated and folded. For the folding mechanism its important to print two…
I like the original katana for lucky but the guard felt lacking to me so I model up a quick guard and edited the origin i printed this with the normal printing settings as lucky 13 (super glue required when putting the guard on)
For optimal results, print the model using a 0.4 mm nozzle. Almost all parts can be printed "in-place" (as a single piece) without support structures—only the lid needs to be attached afterwards. All blades are fully interchangeable. I…
this is a wall mount for katana and wakizashi (the little sword on the top). I decided to make this support because the swords are bulky on my desk. the screws that you need are 4 M3
I split the katana and blade so that you can have the blade and handle different colours. Print instructions Print the blade first in the color of your choice. When slicing the Handle, add a "Color Change" in PrusaSlicer at 180mm just…
Designed with meticulous attention to detail, the model features a textured tsuka (handle) with intricate patterns that emulate traditional ito (braid). The tsuba (guard) boasts a classic aesthetic with a contemporary twist, while the…
A simple, easy to assemble model of the Thermal Katana from Cyberpunk 2077. The katana is 1.3m long. This version does not have room for electronics. Some filing/sanding may be necessary to fit parts together depending on your printer.…
This collapsing sword is designed to be printed as one part. The fabric tassel prints flat and clips on. It is formed with a heat gun. The multi-part replaceable blade version is available to my Clubs members. Supports are not required,…
please leave a review if you like this model and let me know if what you would like me to make next
This is a digital 3D printable model of Bo-Katan's Mythosaur Sigil Emblem from the Mandalorian series. In season 3, Bo-Katan receives a new shoulder armor with the Mythosaur head sigil. The new shoulder armor STL is a part of the "armor"…
V2.4 06 Dec 2023: Open frame version More beautiful Even slimmer Less bridging needed I prefer "inline" dual katana holsters, so I tried to design a modular version. Unfortunately it loses the X shape, but it doesn't hurt me much. I am…
Remix of the model scaled up and cut into parts for small printers. Modifications made without losing the originality of
One more request from my kid, a smaller butterfly in the shape of a katana. You will need: 4x Screws: 3mm in diameter and 10mm long 4 nuts: 3mm Video with a small demonstration of the katana in action: The initial layer may be…
A variation on my original katana sheath design for Lucky 13 but now with the more articulated Dummy 13! If you have my sheath and a katana then no need to print a different one because this new waist for Dummy 13 supports that sheath. If…
MSI does not include the bracket for the secondary NVME SSD slot in the box with the laptop, you have to contact their RMA service for them to send you the bracket ! So that is what I did, and this model is as close of a replica as I…
Thanks to T-Bone9600 for making these files and uploading them as .PDO's for people to make in Pepakura. Once again thanks for sharing Tony and allowing me the opportunity to convert this excellent work to . OBJ and .STL's . As with all…
Collapsing Katana all the parts separated. No vase mode Required.
modeled this up for fun. split into manageable parts, blade takes a 1/8 in rod(suggest metal). Category: Props
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Veröffentlichen, verteilen, verkaufen oder handeln Sie die Dateien oder physischen Modelle dieses Objekts nicht.
A sword Katana Print in place just remove tip of the sword after print. Have a fun day !! The symbol on sword mean PIECE Commercial Membership – all my models with a commercial license: https://www.patreon.com/c/BondFire
This collapsing sword is designed to be printed as one part. The fabric tassel prints flat and clips on. It is formed with a heat gun. The multi-part replaceable blade version is available to my Clubs members. Supports are not required,…
I printed it without metal rod in it and all the parts are holding together, but you can't really play with it without hearing cracking noises. I just super glued everything.
Scaled to x=105%, y=105%, z=90% - see the files for more print settings. Printed the blade first, then the handle. Added a pause right before the base of the hilt (top of the print) was covered up and carefully dropped it in. Be quick…
Kikoku from One Piece wielded by Trafalgar Law. Wanted to push my limit a bit with this one. WARNING! THIS THING IS HUGE! UPDATED!!! The handle has room for a wooden rod of 15mm diameter and 348mm long. Blade now use one long rod of about…
Fusion360 Printed PLA 1.0 nozzle .32 layer height Still needs assembling, will update with pictures once that is complete.
Looking to spice up your robot? Print this dual holster to attach to your easy 13 robot! just print the holster with supports and the swords and your done, I recommend sanding the swords a bit if they don't fit.
This model is compatible with the lego system.
Transformers( autobot) Collapsing Katana (Print in Place)
I actually don't even know how you'd print these- TinkerCAD Link!! I'm not sure if it'll allow you to remix it though- https://www.tinkercad.com/things/aBiKaKQzkFA-brilliant-tumelo
I havent printed this model yet and If you decided to print please share your feedback on the model. This sword is design for Gundam with the 1/144 scale and it fits the30 Minute Mission/Sister Model Kit and as well the AMAIM…
Had another go at tidying this up to print. Re inspired by Frostfyre. Still untested but please post a pic if you do print it. Always check your files sizes too, Cheer Jace Learnt a couple of things over the past few years so I have added…
A wall mount for katana and sheath v2 pieces are for add an m5 rod to reinforce the hanger, just in case you want yo use it with a heavier katana
print one by one in the vase mode, set layer width to 0.9mm, 1 wall (vase mode default) Replaceable Curved Blades for Collapsing Retractable Katana (Rengok, Tanjiro and similar):…
I created 3 conjoined katana sheaths to replicate the iconic ones used by Zoro in One Piece for the Dummy 13 figure. For more Dummy 13 and One Piece related designs, please look at my other models. I hope you enjoy my designs! :)
Inspired by the SRU Katana Grip The Extendable Katana Foregrip is a length-customizable foregrip. By printing additional spacers, one can adjust the length in increments of 10mm. Hardware required: 1x M4x25mm bolt+nut (or 6-32x1") for…
Hi, this is a Remix from: Scaled up to 1m sword lenght with hole for M8 threaded rod to stabilize Category: 3D Printing
It is a holder for a KATANA, my friend has two. The middle one is 105mm from the base to the circle. The other two is minuss 40mm therefore 65mm, the other is 125mm. I used PETG but most polymers are fine. Infill: 5% 5 is plenty, the…
I made mode of Split soul katana from JJK because i was bored i didnt have intensions for printing this in meanwhile but when i do i will update file with image (i didnt made decor thing at the end because it was too complex for me and if…
This 3D-printed katana holster is designed to perfectly complement your Dummy 13 figure, allowing the katana to be securely sheathed and easily accessible. The holster is scaled for a snug fit, ensuring that it attaches smoothly to your…
Espada decorativa, pero que resiste el movimiento gracias a las varillas internas de 5mm de madera que le otorgan rigidez. Las varillas de madera utilizadas son de madera de 5mm de diámetro por 810mm de largo Configuraciones de impresión:…
Batman Collapsing Katana (Print in Place)
Ok , so this is the V6 of my Bo Katan . Much , much more accurate. Includes the neck seal Cut up files included. 198mm inside ear to ear measurements at 100% (i've tried to get it to Katie Sackhoffs measurements) This is my best yet.…
Need to hang your katana to the wall? Here your solution: print two of the same .stl file. If you want print the second piece flipped by 180°, so that the outside texture is the same.
I needed a wall-mounted hanger for a new daisho set that I bought, so i designed this. I thought most of the existing models seemed overly complicated or over-built. These are quick to print (about one hour and 40 minutes each), and are…
Based on the guard of Tanjiro's katana from the anime Demon Slayer. Designed to go around a 7-8 mm pencil. Inner diameter is 8 mm. It uses the handle from this design here https://www.thingiverse.com/thing:3639693
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Owl Eyes template from VaultFox (https://vaultfox.net/portfolio/bo-katan-from-the-mandalorian) converted into a stencil. The helmet model itself was from https://galacticarmory.net
V1.0 28. Feb. 2024: Revised as an independent prop V1.0, 26. Jan. 2024: first released as part of “DUMMY 13 goes to COMIC CON - Deathstroke” This weapon was designed for my Deathstroke costume. You can print the blades in other colors, or…
Printed with Prusament PETG Jet black. Katana sword model: Katana for Lucky 13 by kh4rj0 | Download free STL model | Printables.com
made to be printed on infinante z, will not work on standard machienes, only requires superglue to put together, but alot of it. Print Settings Printer Brand: Creality Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 50-100%…
A stand for a mini katana (15cm length). Printed in 3 separate parts, the 2 laterals and a bottom part, each piece laying flat on the bed. The parts can be simply slotted in and will hold together, but I've superglued mine together. The…
This model is compatible with the lego system.
This is a waist for the Type-F/Feminine Dummy 13 (Beta Skeleton). I wanted the option of mounting a katana on either side, but didn't want a permanent modification. The peg size is 3mm, so you can really put whatever you want in there. I…
There are many more like it, but this one is mine. The goal of this design is good printbility with sword like profile. So curvature and reasonable taper , while having all QOL features like changeable blade and guard , and way to lock so…
This is a simple saber wall mount. Light enough to avoid the big transversal pieces we can find on traditional saber wall mount. You need 2 pieces of it to display on your wall, your saber. It's designed at first to support my Korean…
