P
Printables
kayoumini old back pack
tadam les print soidixsant inutile de rady
Wyniki wyszukiwania: kayou
Liczymy pasujące modele…
P
Printables
Kayoumini 2.5" Travel Case
Print in rigid filament (PLA, PETG etc). Total plastic required is ≈140g. Additional hardware required : 6x2mm Magnets 1.75mm Standard filament (PLA, PETG, Whatever) for the hinge. Hinge and magnets are mounted as shown : Use cyano glue…
P
Printables
KayouMini 2 Antenna BackPack 12mm Standoffs
Remix of the backpack for my two antennas, space for wires underneath and antennas up top.
P
Printables
JST Protection AIO15 Kayoumini
DO *NOT* SHOVE THIS INTO JST PLUG ITSELF. This fits in the space between the frame and the outside of the plug
P
Printables
Stronger Kayoumini TPU Battery Straps + Cable holder + Balance Plug holder
Added another layer to the original design to hold the individual Battery strap strongly in place - minimizing potential damage to the FC/O4 air unit during a crash. Added a version that holds the XT30 cable firmly in place, away from the…
P
Printables
DJI osmo nano Kayouloin case
DJI osmo nano Kayouloin case 25° Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu Free my models 6a74c3eeeb1d
P
Printables
Kayoumini 2.5 Flywoo O4 Wide Lens Mount (for the Kit / Camera)
Update 08.02.2026 noticed that you can't flip the video feed in the goggles anymore. So cam needs to be rotated 180 degrees and therefore the "backplate" needed changes 15, 25 and 35 degree mount for Kayoumini 2.5 and the Flywoo O4 Wide…
P
Printables
Kayoumini Canopy for O4 C03 LensMod
Kayoumini Canopy for O4 lite with Betafpv's C03 lens mod. Print in TPU
P
Printables
Kayoumini Travel Case Easy Print Variations
Simplified and easy to print Kayoumini Travel case with and without magnet insets. Additional Hardware required for magnet case versions: 6x2mm Magnets 1.75mm Standard filament (PLA, PETG, Whatever) for the hinge. Attention Designed for…
P
Printables
Kayoumini Case 6 battery version
This is a storage box designed for the Kayoumini , featuring an upper holder that can secure up to 6 batteries . The design was made using Flywoo Explorer 420mAh HV 2S 80C batteries , but other batteries with similar dimensions may fit as…
P
Printables
Kayoumini 25deg Frontend for the O3 Lens Mod on the DJI O4 *Flywoo ND filters version*
You can use the flywoo o3 lite nd filters with your o3 lens mod (dji o4 lite). For 12mm standoffs / 25 degrees of tilt
P
Printables
Lighter Kayoumini 2.5 Flywoo O4 Wide Lens Mount (for the Kit / Camera)
Reduced weight of @mosch_3121698 's design by +1 gram. Adapted to 15mm standoffs. 25 degrees only.
P
Printables
Display Stands for Kayou Transformers Lenticular Trading Cards
Recently opened up some Energon Universe Kayou trading card packs and got theses impressive logo-shaped lenticular transformers cards! Thought they would look great as standee pieces for the collection, so here we are! These stands allow…
P
Printables
KAYOUDUR TPU for 12,5/10mm Capacitor with Vifly Finder 2 Buzzer
Fits both front standoffs and adjusts perfectly behind the front TPU. The button on the side is ideally positioned for the Vifly Finder 2 Buzzer. Choose between 12.5 or 10 mm as the capacitor diameter size.
P
Printables
Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder
Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder
P
Printables
Kayoumini 2.5" backpack
Kayoumini 2.5" backpack housing XT30, default DJI O4 antenna and TBS Tracer Immortal T (I believe it has 80mm cable). For 15 x 4mm standoffs. Slightly larger version of "kayou_ass_xt30_90d_fixed" with XT30 removable without soldering and…
P
Printables
Kayoudur action2 25deg
An action2 case for your Kayoudur (extra screenguard and space for tbs nd filters) 25deg only
P
Printables
Kayou Gel Pen to Ballpoint Converter
What: A 3D printable model of a converter, or an adapter, that allows a gel pen to use ballpoint refill. Why: Gel pen is easy to write with but it sometimes not suitable for legal documents which will hard require ballpoint pen. Ballpoint…
P
Printables
Kayoumini BT3.0 Mount
BetaFPV RA BT 3.0 connector mount for Kayoumini. Prints with supports. Tight fit all around.
P
Printables
Kayoumini C03 30° Cam Mount
Kayoumini C03 30° Cam Mount w/ Integrated ORT Micro Vee and x14 ELRS antenna mounts. Remix from original. Prints with supports lens down. You will need the 40mm version of the micro vee when using the Happymodel x14 analog AIO. Printer…
P
Printables
Kayoudur 5" - TPU Collection
This page is a Wiki regrouping all the necessary informations about 3D Printable TPU Files for the Kayoudur 5" . All of the .stl files are available in the “Files” tab. Kayoudur 5" Starter Pack - All you need to know Recommended…
P
Printables
Kayoumini 2.5" - TPU Collection
This page is a Wiki regrouping all the necessary informations about 3D Printable TPU Files for the Kayoumini 2.5" . All of the .stl files are available in the “Files” tab. Kayoumini 2.5" Starter Pack - All you need to know Recommended…
P
Printables
Support Osmo Action 3/4/5 Kayouflip / Kayoudur
case pour Osmo Action 3/4/5 Kayouflip / Kayoudur Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
P
Printables
Lipo Shield Kayoudur with XT60 support
You need to use a bracket to attach the XT60 to the TPU like this: https://www.lacameraembarquee.fr/cables-adaptateurs-connecteurs-fpv/14548-6370-support-aluminium-lemonfpv-pour-prise-xt60xt90.html#/1263-connecteur_batterie_fpv-xt60
P
Printables
KayouDur alternative tpu set
Set of files to protect your already stirdy KayouDur based drone. For the moment, the set consists of : A different model of motor protection. I don't know how better/worse it is to the original but I wanted to make my own. A lipo…
P
Printables
Backpack pack Kayouloin 7" gps 29x29mm GPS M1025
Vous avez besoin de rajouter une table basse à votre kayouloin ? Ce fichier est fait pour vous Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
P
Printables
Kayoumini baby ratel runcam thumb pro mount
Salut a tous !!! Voici une version du kayoumini où vous pouvez rajouter une Runcam thumb pro Poids: babyratel 30° (3.05g) + runcam mount = 4.89g Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
P
Printables
Shaks DJI Osmo Action 5 pro for kayouloin 7"
Shaks DJI Osmo Action 5 pro for kayouloin 7" tilt 25° et 30° disponible new version Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
P
Printables
Kayouloin FPV Cam 19mm w/ RX ELRS
Kayouloin FPV Cam 19mm w/ RX ELRS. Category: 3D Printing
P
Printables
Kayouloin ELRS mount vertical (RP3)
Kayouloin ELRS mount vertical. (RP3) Category: 3D Printing
P
Printables
Kayoudur/Flip Session 5 Mount Bando
Remix "Kayoudur/Flip Gopro Session 4/5 Mounts". NO TBS FILTER SLOT 30° Category: 3D Printing
P
Printables
Tank Solo VTX mount for Kayouloin
RUSH FPV Tank Solo VTX mount for Kayouloin. Category: 3D Printing
P
Printables
Kayouloin Gopro Session 4/5 30°
Gopro Session 4/5 Mounts for Kayouloin. Category: 3D Printing
P
Printables
Kayoudur bumper ELRS mount
Remix KD Bumper avec support antenne ELRS Category: 3D Printing
P
Printables
Kayoudur Arm Protection Remix
Remix of "Kayoudur arm protection reinforced by PulseFPV" Category: 3D Printing
P
Printables
Kayoudur support DJI Action 2 15°
Support TPU DJI Action 2 15° pour la Kayoudur Print Settings Printer Brand: Creality Printer: Ender 3 **Supports:** Yes Infill: 100% **Filament:** Sain Smart TPU Category: Hobby
P
Printables
KayouLoin GoPro Filtre ND 9 10 11 12 13
KayouLoin Support GoPro Filtre ND 9 10 11 12 tilt 25° Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
P
Printables
Front skarkfin / Aileron avant ; Kayoudur / Kayouflip
Vitesse maxi augmentée de 80 km/h si imprimé en rouge.
P
Printables
dual linear antenna / double antenne linéaire ; DJI O3 ; Kayoudur / kayouflip
se monte à la place de "KD-F_O3_Antenna.stl" sur la page officielle des TPU Kayoudur / Kayouflip de @KayouFrames_1397485 Utilisez des antennes en 5.8 Ghz Exemple d'antenne utilisées, en 5cm de long:…
P
Printables
Insta360 GO3S mount for Kayoudur / Kayouflip
la caméra filmera en 8K / 240FPS si imprimé en rose bonbon
P
Printables
Kayoumini baby ratel runcam thumb pro naked hard mount
Salut a tous !!! Voici une version du kayoumini où vous pouvez rajouter une Runcam thumb pro v2 naked Kayoumini baby ratel runcam thumb pro naked hard mount tilt 30° "NEW" : support tpu pour la Runcam thumpro v1 Paramètre d'impression:…
P
Printables
Kayouflip5 Flywoo Naked GoPro Mount
I don't have such a frame so I can't test the mount. I hope it fits! There are two versions. One with an angle of 25deg and the other one with an angle of 30deg.
P
Printables
Kayouloin7 Flywoo Naked GoPro Mount
I don't have such a frame so I can't test the mount. I hope it fits! There are two versions. One with an angle of 25deg and the other one with an angle of 30deg.
P
Printables
sturdier Kayoumini Parts (skids)(Caddx Ant canopy)(motor protectors)(vtx anenna holder)
A little Stylish rework of the canopy for the caddx ant (i actually redesigned it from the ground up, but i made it to be the same shape) with some slots to be colored with nail polish. that is a bonus if you care for color matching your…
P
Printables
KAYOUMINI led TPU kit (remix)
Remix du très bon kit TPU led pour Kayoumini de shaks -TPU de bras UltraHeavy/light version ©®™ -Backpack lineaire kit TPU led avec passage de cable xt30 (sans antenne ELRS, c'est pour les faible) -Camera mount pour baby ratel 2 à angle…
P
Printables
KayouDur Peanut/Insta360 Go2 Mount
This is a TPU camera mount made for the Caddx Peanut or insta360 Go2. It fits the KayouDur frame from KayouFrames Print it like any TPU mount. Category: R/C Vehicles
P
Printables
KayouLoin Peanut/Insta360 Go2 Mount
This is a TPU camera mount made for the Caddx Peanut or insta360 Go2. It fits the KayouLoin frame from KayouFrames Print it like any TPU mount. Category: R/C Vehicles
P
Printables
elrs antenna mount with zip tie (kayouframes backpack inspiration)
very thight fit would recomend printing at 50% can be used for any frames with 20mm spacing at the back
P
Printables
Kayoumini 2.5" Travel Case
Print in rigid filament (PLA, PETG etc). Total plastic required is ≈140g. Additional hardware required : 6x2mm Magnets 1.75mm Standard filament (PLA, PETG, Whatever) for the hinge. Hinge and magnets are mounted as shown : Use cyano glue…
P
Printables
KAYOUFLIP ARMS BUMPER KD STYLE LONGER
To increase clearance between the bottom of the frame and the floor
P
Printables
Kayoumini TPU Battery Straps (with source)
I made this to hold my Betafpv Lava 450 packs, but you can find the (super simple) source in the downloads so you can easily edit the dimensions. Print out of TPU.
P
Printables
KayouMini 2 Antenna BackPack 12mm Standoffs
Remix of the backpack for my two antennas, space for wires underneath and antennas up top.
P
Printables
Kayouloin Low profile
Salut tout le monde ! 👋 J'ai fait un ptit kayouloin Low Profile , un remix du modèle original de la frame de chez Kayou. Voilà ce que j’ai fait : Entretoises : 10 mm à l’arrière et 21 mm à l’avant Camplates en ABS : refaites pour le style…
P
Printables
Kayoumini 2.5" Case
Case for kayoumini. Inpired by this model https://www.printables.com/model/1169325-kayoumini-25-travel-case Printed with PLA without support
P
Printables
KAYOUFLIP_locked_30deg_ws_avatarpro_remix
the photo is not the updated version with the tpu around the lens the print file is updated.
P
Printables
Kayoumini O4 Camera Mount with Push Fit ND Filters
Just a quick remix of the original 20 degree o4 camera mount for the Kayoumini. O4 ND filters from Flywoo. I do recommend printing in black TPU or at least not in a translucent colour like I did because you will see some of that colour…
P
Printables
KayouMini Camera TPU Print Support
I was bored of difficulty to support the KayouMini camera TPU prints. So I made this little manual support that needs to be inserted mid print at Z=4.20mm It allows perfect no support printing of camera TPUs. Print the support in PLA,…
P
Printables
Camera mount / HDZero Nano 90 / KayouMini / 25 degrees
This is my HDZ Nano90 TPU camera mount for the KayouMini FPV quad frame. In order to reduce weight, instead of holes, I use a single perimeter, with 15% gyroid infill. This creates a light “air matress” effect that protects the camera…
P
Printables
Kayoumini: Parametric Camera Frontend
This is a fully parametric reproduction of the original Kayoumini frontend by Kayou Frames in Autodesk Fusion. You can easily tweak it for any camera by changing the user parameters here: Here are the available parameters A quick rundown:…
P
Printables
Mount for Kayoumini with Flywoo DJI O4 Lite Wide-Angle Lens
Made for Kayoumini with Flywoo DJI O4 Lite Wide-Angle Lens Angle - 35/40/45°
P
Printables
Kayoumini Lens Cover
This is a lens cover for the Kayoumini frame from Kayou Frames. It prints quickly and only using 1.5g of filament, so its a fast and cheap upgrade for the drone. It snaps into place and to remove it just pull out of one of the tabs on the…
P
Printables
HDZero Lux KayouMini Canopy
This was made for using the lux camera with the aio15 in the kayoumini.
P
Printables
JST Protection AIO15 Kayoumini
DO *NOT* SHOVE THIS INTO JST PLUG ITSELF. This fits in the space between the frame and the outside of the plug
P
Printables
Kayoudur / Kayouflip double horn lipo guard
The “full” version is more resistant, it weight ~2g more at 100% infill
P
Printables
Kayoudur giga heavy bumper
I designed those for maximum motor protection, it's heavy but who cares (:
P
Printables
Kayoumini DJI 03 lens mod
Modified original 20 degree Kayoumini to use DJI 03 lens. Printed in TPU as the original.
P
Printables
Kayoudur Arm Airbumper
Kayoudur Arm Bumper Airbumper offers more impact protection and saves your carbon arm. Remix of Lightweight High OG Skid. Best printorientation is shown in last picture.
P
Printables
20+25 Degrees Kayoumini Mount for Flywoo DJI O4 Lite Wide-Angle Lens
Updated version now allows easy ND-Filter switch and adds support for 12mm and 15mm Standoffs.
P
Printables
Kayoumini Frontend for DJI O4 CO3 Lens Mod
Frontend to go alongside my Betafpv CO3 Lens Mod for the DJI O4 “lite” that can be found here: https://www.printables.com/model/1380946-dji-o4-lens-mod-betafpv-co3-lens-my-best-to-date I've only exported the 25deg STL that I use, but I'm…
P
Printables
KayouMini TPU (NanoV3, TrueRC)
I built a KayouMini with the components I had left: a Flywoo Nano V3 and a TrueRC Singularity antenna. The camera mount lets me install the ELRS antenna and route the XT30 cable over the top so it won’t get hit by the props. The antenna…
P
Printables
MPX kayoumini mod dji o4 lite
Petite conception rapide, histoire de tester, de s'amuser, pour faire une MPX en mode Kayoumini. On gratte un peu de poids si on compare au TPU Red Bull. On perd à peu près 10 grammes, ce qui n'est pas négligeable. On retrouve un peu le…
P
Printables
Stronger Kayoumini TPU Battery Straps + Cable holder + Balance Plug holder
Added another layer to the original design to hold the individual Battery strap strongly in place - minimizing potential damage to the FC/O4 air unit during a crash. Added a version that holds the XT30 cable firmly in place, away from the…
P
Printables
Kayoumini Skadis Holder
This is an Ikea Skadis holder for the tiny but mighty KAYOUMINI. It has 2 hooks so it doesent rotate in the pegboard. I printed it in ELEGOO pla and it only uses 7 grams of filament, so it's an easy and fast print.
P
Printables
Kayoudur / Kayouflip DJI Osmo Nano mount 30deg
Inspired by YannickFPV's great designs for the other DJI cams. Protect your Osmo Nano while smashing your quad into walls! No TPU in view in ultrawide! Supports generic ND filters, like TBS and CameraButter. Print vertically with…
P
Printables
Kayoudur 2 pieces backpack
This design split the backpack in two separate pieces. One for the antennas and one for the bumper (also bigger). This design also allow me to print the bumper in a different angle, making it very durable. See pictures for example.
P
Printables
Kayoudur 2 pieces front
This design split the front part in two separate pieces. One for the camera and one for the bumper (also bigger). This design also allow me to print the bumper in a different angle, making it very durable. See pictures for example.
P
Printables
DJI osmo nano Kayouloin case
DJI osmo nano Kayouloin case 25° Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu Free my models 6a74c3eeeb1d
P
Printables
Backpack variations for Kayoumini
Holds antennas firmly in place + easy printing + polygonal design.
P
Printables
Kayoumini TPU for Baby Ratel 2 (20 degres) and Vifly Finder Mini
0.4g heavier than stock baby ratel 2 tpu The buzzer itself adds another 2.7g
P
Printables
DJI Osmo Action 5 pro mount for kayouloin
I remixed Shaks' model to support for ND filters. 30 tilt.I remixed Shaks' model to support for ND filters. 30 tilt. Print in TPU.
P
Printables
Kayoumini support vifly mini et antenne O4
Voici 2 supports pour le Kayoumini * un support pour vifly mini * un support pour l'antenne du O4 Les deux supports se montent sur la bottom plate et peuvent accueillir une lipo 2S 450mah
P
Printables
Kayou Mini - KayouFrames - BackPack BT3
BackPack pour KayouMini BT3 Un mini backpack pour inclure proprement une mini antenne et un mini connecteur BT3 pour votre mini Kayou. Vient se prendre sur les mini entretoises arrières qui stabilisent le TPU. Mini protection pour la mini…
P
Printables
Kayoumini Antenna Mount + Balancer Holder
This is an antenna mount for the Kayoumini quad. It features holders for the RX antenna, the VTX antenna and storage for 2S balancer plug. Choose between 14 and 15 mm standoff height and 3.5 and 4.0 mm standoff diameter. Print with TPU in…
P
Printables
Kayoumini Flywoo Wide Canopy
Kayoumini Flywoo Wide Canopy 20 degrees 12mm and 14mm Standoffs. I print lens down for best results.
P
Printables
Kayoumini 2.5 Flywoo O4 Wide Lens Mount (for the Kit / Camera)
Update 08.02.2026 noticed that you can't flip the video feed in the goggles anymore. So cam needs to be rotated 180 degrees and therefore the "backplate" needed changes 15, 25 and 35 degree mount for Kayoumini 2.5 and the Flywoo O4 Wide…
P
Printables
Shaks DJI Osmo Action 6 for kayouloin 7"
Shaks DJI Osmo Action 6 for kayouloin 7" tilt 25° Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
P
Printables
DJI Osmo Action 6 HardCase Kayouflip / Kayoudur
HardCase pour Osmo Action 6 Kayouflip / Kayoudur Paramètre d'impression: 30-50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
P
Printables
Osmo Action 6 HardCase Kayouloin
HardCase pour Osmo Action 6 Kayouflip / Kayoudur Paramètre d'impression: 30-50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
P
Printables
Kayoumini Canopy for O4 C03 LensMod
Kayoumini Canopy for O4 lite with Betafpv's C03 lens mod. Print in TPU