Liczymy pasujące modele…
ℹ The teeth are a bit sharp, so please be careful! As you’ve probably noticed, the head can be attached, there are two different versions available: a “Hard to press in” and an “Easy to press in” version. Choose whichever you prefer, one…
It's a big skeleton that is inspired by a Lego skeleton. If you want to know more about this project or see more pictures, check out my project documentation page . This is also available on Thingiverse . If you like this model, check out…
🎨Try KOGI LAB for free at kogilab.com ! Print in Place Fully Articulated Skeleton Hand License Notice: This model is free for personal, non-commercial use only. If you'd like to sell physical prints or monetize it in any way, please visit…
MakerBot's T-Rex Skeleton is a masterpiece. Too bad MakerBot has ignored fans' long-time cry to fix some obvious and critical issues. Thus I made the following fixes to make the model printable: --I fixed tail parts A and B. Tail part A…
ℹ The teeth are a bit sharp, so please be careful! As you’ve probably noticed, the head can be attached, please be cautious when snapping the head on to avoid injury! ℹ Tips for printing: Filament: PLA Supports: No! Layer height:…
WARNING: Contains small parts. Not intended for children below 3 years old. Santa Hat now available! Download it here! Printable assembly guide now available for download. A base/diorama builder is available for download for this mini…
Build your skeletal army! This model features a highly poseable skeleton figure as well as an imposing suite of weapons. Printing and assembly For best results, print the skeleton parts in ASA. PETG is all right too. PLA for the skeleton…
The head and body are two separate parts. Simply click the head onto the body. Please be careful when doing this! Tips for printing: Filament: PLA Supports: No! Layer height: 0.2mm Wall loops: 3 Infill: 15% Seam position: back Wall…
ℹ Tips for printing: Filament: PLA Supports: No! Layer height: 0.16(0.15)mm or 0.2mm Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! BuildPlate: Smooth (Textured Build Plates not…
[Updated 2024-10-29: Added link to other Halloween Models.] Check out my collection of Halloween Models: [Updated 2024-10-21: BIG-BONE-KNEE UPGRADE Update notes: Based on feedback, the updated version contains: Thickened joints,…
Bring some rattling fun to your desk, shelf, or backpack with the Jolly Skeleton ! Designed in a simplified, cartoonish style, this adorable skeleton features a big round head, plump little hands, and boot-like feet. The head and jaw are…
Tips for printing: Filament: PLA (only use PLA) Supports: No! Layer height: 0.16mm (optimal) (0.2mm also works) Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! BuildPlate: Smooth (Textured…
The Wankel rotary engine is marvel of modern engineering, and now you can experience the wondrous complexity of it's mechanical operation in the palm of your hand! The assembly consists of three pieces, all lightweight and easy to print.…
Designed to move bones and make different positions of the hand and reposition it back. This model is meant to be printed with TPU to be durable. With PETG or PLA it is also OK for few moves of each part. With stand to position it…
An articulated dinosaur skeleton with a removable skull. Triceratops, Styracosaurus Xenocerotops and Diablocerotops skulls included. Easy to print and should not need supports. Do not recommend printing any smaller than the default .…
Tested print profile for the articulated Skeleton Axolotl 0.20 mm layer height 2 wall loops 15% sparse infill PLA One plate Print-in-place No assembly required It has been successfully printed with and WITHOUT supports - up to printer…
Remix of version V2.1 by Simon with 10 instead of 5 slots. Fits square lids with a length of 15 cm or rectangular lids with a length of 21 cm (upright) Printed using PETG | 30% infill | no supports required
👉 Join Vault Access on Patreon: https://www.patreon.com/c/TheDuckVault/membership Vault Access gets you: ✅ The commercial license to print and sell all 400+ ducks, this one included ✅ 210+ exclusive ducks, all yours to download the moment…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) THE SKELETON HEAD ROSE /…
Tips for printing: Filament: PLA (only use PLA) Supports: No! Layer height: 0.16mm (optimal) (0.2mm also works) Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! BuildPlate: Smooth (Textured…
An articulated dinosaur skeleton with a removable skull. A T-rex, Ceratosaurus and Allosaurus style skulls are included. Easy to print and should not need supports. Do not recommend printing any smaller than the default . Print with 2 or…
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
Tips for printing: Filament: PLA (only use PLA) Supports: No! Layer height: 0.16mm (optimal) (0.2mm also works) Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! BuildPlate: Smooth (Textured…
Elevate your Halloween decor or add a quirky touch to your home with this unique skeleton figure, stylishly dressed in a hoodie. This model serves as an excellent decoration piece or a fun, eye-catching print for enthusiasts. This model…
This adorable mini skeleton is the perfect mix of spooky and cute! Whether you want to display it on your desk or carry it everywhere as a keychain, this model comes with both versions included. Great as a Halloween accessory, a fun gift,…
no supports infill 15% no rafts
A Minimalist Skeletonized Dagger. The Finger whole is the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5 15.7 0.785 or 78.5% 6 16.5 0.825…
This skeleton is a remix of Posable Skeleton (from Fub-Artistry), which is itself a remix of Mr Bones (from graphix25). Since I'm on the topic of giving credit, I will also mention that the split ribs files come from Mr Bones Chest Remix…
If you want ALL the versions, you can go grab them all for FREE on our patreon page: https://www.patreon.com/SEREV3d We reworked the inside structure completely: ✅ The big lantern Prints in under 8 hours (compared to +11 hours of the 2024…
3 support-free skeletons. All dead, just animated by evil magic. EDIT There is a modified version of halberdier with reinforced leg. Suitable for 28mm tabletop games. Created so that they do not need any supports and print well on a cheap…
Skeleton Hand Bookstop Halloween is just around the corner! Get your home ready for the spooky season with the Skeleton Hand Bookstop . This striking and functional bookend securely holds your favorite books while acting as a captivating…
I remixed the skeleton parts in Tinkercad into a simple kit card making it great for kids and party's. I made to the links connecting the bones only two layers thick at 0.2 layer height, making for easy removal. Check out the original…
Tiny articulated Skeleton Dragon Keychain now available to download! This dragon is very unique with lots of details and fast to print as a keychain. It's also very flexible and I provide you a 3mf Multicolor File to highlight some spots…
Hier haben wir eine Wandhalterung für 18V Makita Akkus in der angewinkelten Version. Durch die angewinkelte Halterung lassen sich die Akkus angenehmer einlegen und entnehmen als bei den normalen geraden Versionen. Es sind Versionen für…
Have fun :) Both Versions 3 Wände / 3 Walls 15Infill Bambu also 2 Colors or other Printers with Break :) Regards
Supports required. Stands on its own. Scalable. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Assembled Dimensions (LxWxH) 167 x 30 x 67 mm (100% scale) Buildplate Dimensions (LxWxH) 114 x 117 x 1 mm (100% scale) Basic information A 26 piece Stegosaurus puzzle kit. You can either test your skill, and assemble it without any help,…
15% infill or more 0.20mm Supports on Scale to preference RECOMMENDED TO SCALE UP A BIT
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
DO NOT SELL MY MODEL (PHISICAL INCLUDED). RESPECT THE TIME THAT I CONTRIBUTED TO CREATE THIS MODEL. MODEL UNDER LICENSED UNDER Creative Commons—Attribution—Noncommercial—No Derivatives…
Keychain eidition of the Funky Skeleton Figure in Hoodie. The model requires a few supports for optimal printing results. I recommend using organic supports for the best outcome. Happy Printing! Patreon, for license:…
What it is A compact tool to determine angles. It also includes a 120 mm linear scale and ring gauges from 1 to 9 mm in 1mm increments (clearance designed is 0.1 mm). What to print There are three parts awaiting you, which can be printed…
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
An articulated dinosaur skeleton with a removable skull. Easy to print and should not need supports. Do not recommend printing any smaller than the default . Print with 2 or 3 walls @.16 layer height.
This is a movable dragon skeleton that is printed in place. You need good bed adhesion. It has also been tested with edge and it comes off beautifully. Happy printing! I used Elegoo Filament Red. 3D Printing Settings Edge: No Supports: No…
An articulated Mosasaurus skeleton. Easy to print and should not need supports. Do not recommend printing any smaller than the default . Print with 2 or 3 walls @.16 layer height.
Two versions of heads: glowing but you must use electric candle - 2. not glowing but you must change colors or print in white and paint Please let me know your experience.
Join here to get access: https://www.patreon.com/kogi3d Print in Place Fully Articulated Skeleton Foot License Notice: This model is free for personal, non-commercial use only. If you'd like to sell physical prints or monetize it in any…
ℹ All my 3mf files are coming with pre painted Supports for the Head! ℹ Yes it can stand! ℹ Tips for printing: Filament: PLA Supports: Yes! Only for the head!! Layer height: 0.16mm Wall loops: 3 Infill: 15% Seam position: back Wall…
The arm file is a 3mf that modifies the arm joint by adding a negative sphere body to make it attach better to the torso. You will need a slicer like PrusaSlicer that supports this. I've also attached a head and face insert that may need…
An articulated dinosaur skeleton with removable skulls. Added a smaller skull. Easy to print and should not need supports. Do not recommend printing any smaller than the default . Print with 2 or 3 walls @.16 layer height.
Meet the Articulated Skeleton Shark – a spooky print-in-place shark created especially for Halloween! 🦈💀 This flexi shark features a dark body with exposed skeletal-style details running through the fins, spine and tail, giving it a…
It is just something funny to pass around
Don't lose your head this holiday season. 💀 These print great without supports! More presents in store ;) ______________________ 19 days 'til Christmas!
Beschreibung Ich habe ein Hybrid Modell erstellt nachdem es bereits den einen oder anden Dosen- und Flaschenverschluss gab habe ich die beiden kombiniert. (der Dosenverschluss kann auch zum Öffnen genommen werden. Drucken kann man ihn aus…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
LEGO HALLOWEEN SKELETON
This is a design for a generic automotive part, which allows you to print as 3 separate pieces that fit on a standard size printer bed. It's a remix of a design originally by TinaBelcher, thanks Tina! Designed to fit my 2017 Focus ST LZ,…
A gothic set of skeleton bookmarks for your next book. No AMS/MMU required, only two color changes. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Black (Esun PLA Black) At layer…
I wanted a flexi rex skeleton but I couldn’t find one already made, so I made this. Began modelling by altering the original STL file but found it easier to start again, so re-made it from scratch. It printed successfully without supports…
Hier könnt ihr euch Print in Place Deckel für eure Bierflaschen drucken. Gedruckt werden können sie aus PLA Material mit min. 2 Wandlinien, 0,2mm Layerhöhe und 15% infill. Es gibt nach Rückfragen nun auch eine Schweizer Variante welche…
The famous weapon used by the SAS in the Iranian embassy hostage crisis in the 1980s. The MP5 can fire 9mm parabellum rounds in single shot, three-round bursts, or full automatic at 800 rounds per minute. Now your Dummy 13 can have one of…
The G4 stryker (throwing) knife also seen in CSGO. Tried to keep the dimensions as close to the real life counter part as possible but couldn't find all of them.
Snap together toy skeleton! This model is from Tinkercad. I uploaded this model here for ease of use so you don't have to get the files from Tinkercad. It would make my day If you added a make!
If you're looking for my Bambu print profile, you'll find it at MW . Minecraft Creeper, Skeleton, and Enderman Bookmarks My son wanted a Minecraft Creeper bookmark , but surprisingly none of the printable ones we found were quite right.…
Who doesn't love halloween? Plus lego? A Halloween Lego skeleton for anyone to enjoy!!!
This is a set of blocks that can be used to recreate the Skeleton Mini-fig with Top Hat from 2020 and an alternate version with a wizard / witch hat from 2023 . We've inlcuded all the necessary stl files to create both skeletons at 500%…
Welcome to The Skeletor Collection —discover the evolution of the Skeletor project, explore each iteration’s unique enhancements, and find out how you can get involved. 📖 Want the full story? All MK7 details and project updates can be…
This is a movable dragon skeleton that is printed on the spot. You need good bed adhesion. It has also been tested with edge and comes off beautifully. Happy printing! 3D Printing Settings Edge: No Supports: No Extent: 2 Filling: 5%…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Skeleton full is 500% infill ,if you want doit you size . I print for 500% skeleton full . 500% other scale parts . 0.28 print . PrusaSlicer STL. I make other stuff for looks like a pirate . all stuff find in https://www.thingiverse.com/…
Based on the vintage wooden kits from my youth, I decided to make one that could be 3D printed.
A LEGO Skeleton! All piece are separed . More easy for printing. Download it, it's free!
english First of all: I appreciate every like and every rating. A small box with a hinged lid. It is suitable for medium sizes. As in my small box (…
ℹ Tips for printing: Filament: PLA Supports: No! Layer height: 0.16(0.15)mm or 0.2mm Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! BuildPlate: Smooth (Textured Build Plates not…
This model was taken from the counter strike 2 files
Every year my household tradition is to print Halloween decorations for fun. This year I found the amazing Lego-Like Skeleton model from Julia Ebert and wanted to enhance it with some fun Pirate accessories. While there were existing…
Angled battery holder for Milwaukee. In 2 versions. Version 1 for screwing with wood screws or version 2 for hexagonal screws. Angewinkelter Akkuhalter für Milwaukee In 2 Versionen verfügbar, Version 1 zum festschrauben mittels…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Requires a lot of patience, support cleaning and glue. To get the left side parts please mirror the right side parts. All of the parts which require second side starts with the letter “R”.
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Halterung für den Schutzdeckel der Gasflasche. Im WoMo fliegt der meist in irgendeine Ecke und man findet ihn nicht wieder. Der Halter kann im Gaskasten angeschraubt oder einfach nur geklebt werden. Der Schutzdeckel ist sicher verwahrt.…
🐱💀 Flexi Skeleton Cat 💀🐱 If you’d like to sell prints of this or my other 3D models, check out my Patreon and get the commercial license! 👉 patreon.com/Symbiance Meet the Flexi Skeleton Cat ! A spooky twist on the classic Flexi Cat, just…
Tyrannosaurus Rex recreation from Makerbot. Ribs should be printed 2 at a time for best results. I glued them since resolution at the connection is mediocre.
We're bust ing out the big toys now 🎁 Supports needed, but cleanup is simple The presents keep comin ;) __________________________ 18 days 'til Christmas!
Wanted to make unique Soap Dish but still wanted it to be practical! 25/5/22 Update: Uploaded Skeleton Shape'd plate for total makeover :) There are skulls & skeletons all over my house (not from any bad reason, just I like the shape and…
A mini skeleton with a removable head! https://youtu.be/aflsFjceqUQ Printing Head prints separately Can be printed in both FDM and resin Supports ARE required on the body - especially below the pelvis and ribs. If printing body #1,…
An articulated Plesiosaurus skeleton. Easy to print and should not need supports. Do not recommend printing any smaller than the default . Print with 2 or 3 walls @.16 layer height.
Bohrer Schärfgerät für Winkelschleifer > Funkenschutz Durchmesser 130mm. Für die Schrauben benötigt man 3stk Muttern M8
Assembly 1 glue two halves together 2 You're done
Skeleton hand for halloween! If you like it --> press like it :-) Modified this model https://www.thingiverse.com/thing:4841107 from DaveMakesStuff -→ https://www.thingiverse.com/DaveMakesStuff that it is printable as one piece. Printed…
Am besten aus PLA drucken. Zusätzlich benötigtes Material: 1 Sechskantschraube M4x10 1 Sechskantmutter (am Besten Selbstsichernd) M4 Bei den GCodes sind Farbwechsel eingefügt, um die Skala besser ablesen zu können: “Bogen”: 0,8mm…
Just slice and print, one-piece print-in-place. Might need to play with it a bit in order to free the joints. Don't print smaller than 50% of the original size, joints won't work properly.
Did you know that some cacti have a natural internal Voronoi-like skeleton? ( Check it out. ) This Voronoi-style saguaro cactus was inspired by that inner structure. And what southwest motif would be complete without a cow skull? I…
![Skeleton hand [Soap Dish]](https://media.printables.com/media/prints/212754/images/1950793_1a9ddb8f-4871-478a-8909-f159df1491ff/skeleton_hand_soap_dish_1.png)
