Liczymy pasujące modele…
The main model here is a reverse bowden and cable support bracket, which is needed to make the KP5L capable of printing reliably. The printer as-shipped makes no accommodation for the filament path between the runout sensor and extruder,…
it's kp5l kingroon Fanduct beter than stock no moddif creat specialy for stock printer print in 0.15 or 0.10 xwith support only for the bed
original stl provided with kingroon doesn't fits my printer :( it's just too high and nozzle hits the bed :( so I've modeled simplest possible mount link to onShape project to edit:…
Took the base model and merged it with one of the cable drag chain from here. See the original models. The bed cable strain relief is great, however the cable can catch on the Y axis motor, I remixed this with the cable cha Included…
I made a carriage to use the stealth burner duct. Infill 40% top and bottom 5 wall 5 Material ABS+ use of supports BL touch mount included
I just so happened to need a model for the fan shroud and I just decided to make one
De cables para impresora Kingroon KP5L
For Marlin FW: #define NOZZLE_TO_PROBE_OFFSET { 30, 0, 0 } Print Settings Printer: TwoTrees Bluer v2 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: DEXP PETG Black Category: 3D Printer Parts
Rotated mount for LCD screen on Kingroon KP5L It's just very quick sketch for my own needs! Fill free to edit/remix, source link:…
Slice with 0.5 line width. This cooling is compatible with Titan or BMG extruder, with stock hotend or e3dv6 ... E3Dv6 with Bi Metal Heatbreak with "nut" is 1.5mm longer - use this model instead of the "standard" E3Dv6 The image above…
I just so happen to be in need of a extruder case that could do two things: Have space for two 5015 fans as I wanted to icrease velocity hold a 4010 fan because at least where I live I can get my hands faster on a 40mm fan than on a 30mm…
fan shroud for longer hotend
The filament holder for the KP5L is a general PITA. If you move your filament above the rails, this is a good solution to keep the filament from dragging in the detector and under extruding. Uses the original screws from the filament…
I remixed : https://www.thingiverse.com/thing:3877505 Add: Spaces for 4 nozzles Spaces for 2 micro sd cards Space for Memory card Slot for caliper Print Settings Printer Brand: Kingroon Printer: Kingroon KP3S Rafts: Yes Supports: Yes…
This is a mount for the GY-291 ADXL345 accelerometer for use with the Kingroon KP5L. It is mounted using the screw holes for the BL Touch (which you really don't need with the KP5L. Manual Mesh Bed Leveling works great and once you do it…
This is a case and mount for the Cheap Yellow Display (CYD - purchase link below) that lets you operate Klipper on any printer. The cover and base for the CYD itself are universal, the printer mount is the only part specifically for the…
Fits on both sides of the Z axis motor, giving you 2 x 2x1 gridfinity spaces. Print as is, no supports, with 10% infill.
With this base you can use the same mod created by LMaker for the kp3s on the kp5l. You don't need any additional screws, just replace the original base of the kp5l and mount it. To assemble the X tension band, you will need 2X M4 nuts .…
Unscrew your belt tensiometer from the end of the x axis. Add this in and screw it back again. Might need longer bolts if you have other modifications to the x axis. Choose either nozzle view or top view. See the attached gifs for nozzle…
I made a wire guide that uses a longer screw(M3?) on the bottom of that annoying box where the breakout board and the stepper motor for X are. There is another one that utilizes a bolt from the Stepper, i just thought this would be better…
I edit the design from: https://www.thingiverse.com/thing:5445821 , but make the screen with equal spaces from the edges Category: 3D Printer Parts
This is a remix of https://www.thingiverse.com/thing:5448824 to hold the filament sensor at 90 degrees. Originaly created by workaholicman on Thingiverse
Get rid of the bundle of wires or any hack you currently run to keep the wires from the gantry to the hotend from tangling somewhere you dont want. The cut between the screws is meant to slide in the cables as not to have to rewire…
What it says in the title, use 10x15 drag chains in your Y axis / Bed cables.
This adapts a 80mm fan into the 40mm hole which has the nozzle exhaust chamber. I haven't got it working as the fan it's replacing is 24v and I don't know how to get 12v power to the fan. Check my other model which is the nozzle exhaust:…
A replacement nozzle cooling system with a duct to fit an 80mm fan. Haven't tried it yet as I'm looking for a way to convert 24v to 12v for the fan. Check out my other model for the fan Duct:…
This adapts a 80mm fan into the 40mm hole which has the nozzle exhaust chamber. I haven't got it working as the fan it's replacing is 24v and I don't know how to get 12v power to the fan. Check my other model which is the nozzle exhaust:…
A replacement nozzle cooling system with a duct to fit an 80mm fan. Haven't tried it yet as I'm looking for a way to convert 24v to 12v for the fan. Check out my other model for the fan Duct:…
A remix of yhristov's remix of my KP3L fan duct to work with the KP5L. The duct is adjustable vertically to work with stock V6s or volcano-style hotends. There are also horizontal adjustments to account for different hotend positioning…
UK Faceplate Adapter for the Paxton KP50 (And K50/P50/TouchLock 50 range) readers (Net2/Switch2). You will need 3x M3x4x5 brass heat inserts and 3xM10x8 screws - I used Allen Cap, but you can use whatever you wish, plus some washers if…
adaptation for kingroon KP5L write your remarks in the comments you will need 5 brass threaded bushings M4 Category: 3D Printer Extruders
infill 20% infill pattern :Triangles no supports
Kingroon KP5L longer Z endstop mount - needed when switching to voron stealthburner toolhead. It's about 5mm longer than stock part
I removed the shroud that came with my kp5m (same as L) as I installed a Trianglelabs BMG/Phateus hot end combo. I used a 40mm fan for the phateus so the stock sheet metal wasn't working so I removed it. That being said the fan has…
tho original model was just a bit to tight for me. It just fit on with a hammer and destroyed my sticker, so I scaled it to 101% so you don’t have to. Top part of printer needs to be dismantled: unscrew the 4 screws on top and one of the…
Slice with 0.5 line width. Print witch supports or with bridges - doesn't matter Print the nozzle with the nose up - the STL is incorrectly directed (manually orient correctly). BLtouch in Marlin: NOZZLE_TO_PROBE_OFFSET { 44, 14, 0 } .…
I remixed this project : https://www.thingiverse.com/thing:2640009 Category: 3D Printer Parts
Finally at last here is the Kingroon KP5L Essential MOD Kit. But let’s talk about the Good, the Bad, and the Ugly. First the Good: The KP5L seems like it checks all the right boxes to be a great printer: dual linear rails on all three…
for cardboard spools ender style holders are best but the kp5L has rollers and the runout sesnsor in a wierd place so this fixes that by using a ender style spool holder. my goal was to make it fully 3d printed and if you 3d print the…
