Liczymy pasujące modele…
A simple key cover for a KW1 key. The fit is tight and should stay put well. No supports needed, 0.2mm height, print in orientation shown in the pictures. I used a brim but might not be necessary. Enjoy :)
A simple 2 KW1 Key holder when using a Lishi Key Cutter to cut a key. A simple holder to ensure that 2 KW1 keys are aligned so that a blank can be cut to copy an existing key using a Lishi Key Cutter.
Micro Switch KW11-3Z Housing 30x30 Extrusion This is a housing for the KW11-3Z microswitch, that fit into 30x30 Aluminum Profiles type B with 8 mm groove. The lip from the housing is 7.8mm wide and 1.5mm high. Use double sided tape to…
Simple Key cover for KW1 type keys. Tolerances are loose due to my key having a design making it thicker than the bare key. May have to scale it down. Also the key ring keeps the cover on as well.
From the original author: A stylish key cover that turns any key into an electric guitar. Remixed for standard Kwikset K1 Keys
5-pin bump key for Kwikset KW1 lock cylinders, for locksport. Based on OpenSCAD code from https://www.thingiverse.com/thing:8925/files
The orginal Y endstop mount (by Ben Levi) does not line up properly with the specified endstop switch (kw11-3p). This remix fixes that by making the holes 9.5mm apart as specified in the dimensions for that type of switch. It also centers…
I had found a SC1 key holder but couldn't find one for a Kwikset KW1 so I decided to make one myself. Printed at .16mm or (Optimal Speed) in PrusaSlicer. Print came out with just the right tolerances.
Parts: 1 - KW12-3 Limit Switch ( amazon ) 2 - M3 x 4mm L x 5mm Brass Heat Inset 2 - M3 x 10mm Button Head 2 - M5 x 15mm Button Head
A credit card-sized 3D printed holder designed to carry your Kwikset KW1 key. This wallet-friendly solution keeps your spare or backup key secure and accessible. FEATURES: - Standard credit card dimensions (85.6mm × 53.98mm × 1.27mm) -…
Siku Rad Ersatz für LKW10 Der Reifen kann aufgeklappt (Filmscharnier angedruckt) auf die Achse geschoben werden und dann zusammen geklebt werden (zB Uhu Hart oder Sekundenkleber) PLA oder PETG Layer: 0,2mm kein Support
Road-legal mode lanyard. A breakaway device that allows you to instantly lock the vehicle's maximum speed. Activated by a microswitch and a cable pull. Micro Roller Lever Arm Limit Switch - Model KW12-3 NO/NC (Normally Open/Normally…
No brim, Infill: 15% is good enough, Layer: 0.35 mm.
This is a customizable 5-pin Kwikset KW1 key with label. Based off of nrp's design Open the .scad file with OpenSCAD and use the parameters on the right side to enter the coding
Simple cover for keys cut from KW1 blanks (e.g. ordinary US house keys). This was designed to be printed with TPU in mind and has not been designed with any tolerances for a friction fit. I printed this hole facing the bed, but if you…
![Speed limiter lanyard, safety pin. [Zrywka] KW12-3 Micro Roller](https://media.printables.com/media/prints/d8360b48-bec7-48c4-b223-a826b478a03d/images/13381603_c3a95053-f798-44ac-b628-bf461e89e544_7e0e29a5-369a-4bf2-803e-39f5b899047f/w1.jpg)
