1 / 1
Credit Card Kwikset KW1 Key Holder — zdjęcie 1

Credit Card Kwikset KW1 Key Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Credit card-sized Kwikset KW1 key holder with precise cutout. Wallet-friendly backup key storage solution.

Ocena
0 / 5
Polubienia
3
Pobrania
16
Wydruki
0
Wyświetlenia
176
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

A credit card-sized 3D printed holder designed to carry your Kwikset KW1 key. This wallet-friendly solution keeps your spare or backup key secure and accessible.

FEATURES:
- Standard credit card dimensions (85.6mm × 53.98mm × 1.27mm)
- Rounded corners matching ISO/IEC 7810 ID-1 card standards
- Precise KW1 key cutout with 0.15mm clearance for easy insertion
- Multiple depth variations (20 different Z-axis positions) for optimal fit
- Thickness matches key thickness for flush appearance

PRINTING:
- No supports required
- Low infill recommended (10-20%)
- Print in PLA or PETG
- Print time: ~15-30 minutes depending on settings

USAGE:
Place your Kwikset KW1 key into the cutout. Secure it in place by applying scotch tape (or similar thin adhesive tape) to both the front and back sides of the card. This keeps the key from falling out while in your wallet.

PERFECT FOR:
- Wallet backup keys
- Spare key storage
- Emergency access solutions
- Minimalist key management

A credit card-sized 3D printed holder designed to carry your Kwikset KW1 key. This wallet-friendly solution keeps your spare or backup key secure and accessible. FEATURES: - Standard credit card dimensions (85.6mm × 53.98mm × 1.27mm) - Rounded corners matching ISO/IEC 7810 ID-1 card standards - Precise KW1 key cutout with 0.15mm clearance for easy insertion. Thickness matches key thickness for flush appearance PRINTING: - No supports required - Low infill recommended (10-20%) - Print in PLA or PETG - Print time: ~15-30 minutes depending on settings USAGE: Place your Kwikset KW1 key into the cutout. Secure it in place by applying scotch tape (or similar thin adhesive tape) to both the front and back sides of the card. This keeps the key from falling out while in your wallet. The multiple depth variations allow you to select the best fit for your specific key. Simply try inserting your key to find the position that provides the most secure fit. PERFECT FOR: - Wallet backup keys - Spare key storage - Emergency access solutions - Minimalist key management

Tagi