Liczymy pasujące modele…
When upgrading the machine with an SKR Mini E3 , the original electronics cover no longer fits. I recreated the cover to restore a look closer to the machine’s original appearance. The files provided allow you to print the cover either as…
The holder for the sunshade on the side of my Little Bamboo 125 roof tent by Vickywood broke when I tried to packdown the tent without lowering the sunshades first. So I remodeled the holder to print a replacement that fits like the…
I remixed model, for it to be compatible with a printer Kywoo 3D Mini. You will need a screw, that will fit the hole in the printer.
When upgrading the machine with an SKR Mini E3 , the original electronics cover no longer fits. I recreated the cover to restore a look closer to the machine’s original appearance. The files provided allow you to print the cover either as…
Profile created for Orcaslicer 2.4.2 based on Creality Ender3 and validated on real 3D Printer Kywoo Tycoon Slim. I know there is a lot to improve, please let me know your improvements so I can share it in here.
About The Kywoo LED accessory comes with long cables and a white (3d printed) switch mount. This looks messy and out of place, so this is a cover to blend it in a bit and hide some cables. Works great with PLA / PETG. (Can use a…
This is a pair of clips that fit a type of TL smoother and the clips will fit the Kywoo 2020 frame. It could also be used for other 2020 frames. The clips have an offset so that when installing inside the box it does not protube outside.…
First modification on my rooftop tent. This little clip allows you to dry your clothes under your tent. I tested the clip in ASA PETG and CarbonfiberPETG, all materials stand our 3 week journey. !!You need to print it with 0.25 and 100%!!
Print in materials with high temperature resistance like PETG for best durability. Model should be oriented flat side down and if possible printed at 100% infill to minimize any deformation when heated.
I created this filament holder for my Tycoon Max. Initially, the PTFE tube goes through the opening a little tightly, but over time the PTFE will then be easier to pass through. I purposely designed it so that after some time, the PTFE…
Superb Adjustable Phone Holder, originally made and distributed on SD card with Kywoo3D printers. You can scale it as you see fit, for example around 200 % should be enough for iPads. lower paws are wide enough to hold phones even with a…
The original cooling setup for the Tycoon uses a single 4010 fan placed under the extruder, which is insufficient for effective airflow. Although other setups with 5015 fans exist, they tend to be complicated and do not make use of the…
Der komplette Satz besteht aus einer langen Führung, der oben seitlich auf dem 2040-Profil montiert ist, und zwei kurzen Haltern. Für die Montage werden benötigt: 4 Lager V-Nut 3x12x4 mm 1 Zylinderschraube M3 x 22 2 Zylinderschrauben M3 x…
The switch of the Kywoo-LED light doesn't look very nice. This cover can be mounted instead of the original cover of the switch. You need 2 additional screws M3 x 12 mm (10 mm may also fit) to mount it with the t-nuts, delivered with the…
Die Blenden sind mit den Originalschrauben des “Kywoo Inductive LED Light” montiert. Beim IDEX habe ich die Lampe oben montiert, weil bei seitlicher Montage der Extruder gegen die Lampe laufen würde. Bei dieser Version wird die Lampe in…
Adapter for the Adxl345 from Trianglelab. Works well and takes almost no time to produce. You will need 4 x M2*3mm bolts or any other type of fastener. M3 size will not fit in the holes of the Adxl345. When you install it on the x axis…
When printing in idex autopark mode, there will alway be wasted filament on both heatends. To avoid it lying all over the desktop, I made this Filament Poop Bins, which fit on both sides of the heatbed. The most of the filament waste is…
An extra soft pad can be made from a simple rubber eraser under the factory feet of the "Kywoo Tycoon Slim" printer. In this way, we can significantly reduce the transmission of harmful vibrations to the workbench. This also reduces the…
I like the phone holder, but the joints are bridges. Not anymore.
Quick Print. Print with fan surface on build plate. No Supports needed You will likely need to resize screwholes with a drillbit. Use PETG minimum for longevity
Fits Tycooon IDEX extruder without black metal shroud. Its possible it works with the shroud but i cant test it anymore. This model is for the left extruder but can be just mirrored to fit the right one with bl touch. It uses only 3 out…
The Kywoo3D Tycoon Max printer is a great design with one clear shortcoming: the single gear printhead, which is heavy as well. To remedy a sloppy extruder I went on a tangent and remixed the VzBot printed Printhead design by Simon Vez to…
After buying a kywoo tycon on ebay for cheap I decided to get the printer working. I testet the design for now 3 month and had no issues. Main issues I had: Heatbed cable is unsafe Powersupply was not earthed Kywoo Mainboard has loud…
I created this as a belt cover for the Kywoo Tycoon Max. I was having issues with my beard getting caught in the pulley and being ripped out while observing the first layer. I got sick of this. So here we go.. The Beard Saver 9000/Belt…
I used PETG to print. I used two M4 Brass threaded inserts on the mount to screw the cradle to it, and two M4 screws and T-nuts to secure the mount to the 40 x 20 extrusion. I have included the step files so that it can easily be modified…
This is made for a 42mm tube i had laying around. You need two holders, and as many rings as you want. The rings are only for keeping the spool from wandering Do you want a different size? Please comment the size you want in mm, and i…
Update: Die neuen Vickywoodstangen sind alle 25mm, sod ass die Klammern angepasst sind. Hallo liebe Community, bei unserem Big Villow 220 gehen öfters die Halteklammern im Eingangsbereich kaputt. Daher habe ich ein 3D Modell zum drucken…
Warme Nächte im Dachzelt und alle Seiten offen? Ging mir auch so. Hatte einen USB-Lüfter rumliegen und schnell was zusammengehauen. Der Lüfter (SPEEDLINK TORNADO METAL XXL) kann so an einen der drei Mittelstreben im Vickywood Small Willow…
