Wyniki wyszukiwania: levis

Television

A flat screen television.

Berliner Fernsehturm (Berlin television tower) 1:500

At 368 metres, the Berlin TV Tower is the tallest building in Germany and the fourth tallest TV tower in Europe. The TV Tower is located in the Park am Fernsehturm in Berlin's Mitte district. In 1969, the year it was completed, it was the…

Old Television

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/c6jbolQ88MS My daughter wanted a Television for her princesses. I mocked up this old school T.V. after the one I still use in my classroom. I scaled it up…

Fallout Radiation King Television 1/4 Scale

I picked up playing the game again, and it has been a long while. While playing, I came across the Radiation King TV which is one of my favorite in game props. Just a lovely design. I've had this in my project book for a while so I dug…

Doll House Television Stand

I designed a T.V. stand for my daughters doll house. Matches the size of the Television I made for her. Print Settings Printer: flashforge creator pro Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .2 Infill: 10% Notes:…

Gabelkopf (clevis) für 20 mm mit "M2-Gewinde"

Ein druckbarer Gabelkopf für kleine RC-Modelle. Möglich wird dieser Druck durch die neuen Organischen Stützstrukturen ab Prusa Slicer 2.6. Wichtig ist, dass er in der skizzierten Lage (Bilder, Code) ausgedruckt wird. PETG ist als Filment…

Old Television

Model of old type of television

Television Set

A tiny television for mice. Best printed at around 1 1/2" screen size, 0.15mm layer height, 10% infill. (Note: for rats, scale up to 3") Print Settings Rafts: No Supports: No Resolution: 200 Infill: 10 Notes: Printed with supports but…

Parametric rod clevis

Overview This is a rod clevis that you can adapt to your needs. Open the “.scad” file, edit it, and generate the rod clevis you want. This model support insert. Configure the insert diameter and length on the “.stl” and generate it. You…

Retro Television - Xiaomi Mijia Bluetooth Thermometer 2 LYWSD03MMC

I recently picked up the ESP32 based OpenTherm Smart Thermostat kit from DIYLess ( https://diyless.com/product/opentherm-thermostat ) as a cheaper alternative to a brand name smart thermostat. It came with a Xiaomi Mijia Bluetooth…

Retro Television (Multicolor)

A model of a vintage television set with a rounded screen, dials, and classic antenna on top. Perfect as a miniature decoration, dollhouse furniture, or nostalgic collectible. Its retro design makes it a fun piece for dioramas or creative…

Vintage television for smartphone

Made for smartphones - max 150x70x13mm - max screen 6,1" Printed without support on the right side.

Vintage Television – Retro CRT TV

This vintage television model captures the iconic look of early CRT screens with a clean, stylised design. The sculpt includes a curved display, side control panel with dials, speaker grille, and classic antenna, all arranged in a…

Retro Style Working Miniature Television

Retro TV, Phone Case works with all phones with a screen size up to 6 inches Print Settings Rafts: No Supports: Doesn't Matter Custom Section Category: Gadgets

SOPORTE ROBUSTO PARA MOVILES, TABLETS, MONITORES Y TELEVISORES, CON 3 INCLINACIONES DIFERENTES, MODULAR.

Después de ver e imprimir muchos soportes de móviles, me decidí a diseñar uno fácil de imprimir, robusto, con regulación de inclinación, universal que sirviera para todos los móviles. Mi sorpresa fue cuando me di cuenta de que podia ser…

Nintendo Switch V1/V2 & OLED 1980's TV (Television) Dock Stand (Old School) (Retro)

This Nintendo Switch TV Dock Stand takes you back to 1989. 📼✨ Give your Nintendo Switch the "Old School" treatment. This vintage TV-style 3d print dock stand isn’t just about the looks—it allows you play while charging and protects your…

Soporte mando de televisión

Soporte para mando de televisión Category: Organization

Old School Tube Television Earrings

A small charm with a loop for mounting. Best printed using resin in batches. There is usually a little spoilage in removal when you print this small. Use 1 or maybe 2 sprues per piece. Disclaimer: Please refer to the manufacturer of your…

DB4 Television Antenna Parts

These parts are designed to go along with the design by Allen Ruppert. ttps://internationalnewshub.blogspot.com/2016/04/how-to-build-your-diy-db4-hdtv-antenna.html This is by far one of the best TV antenna's I've ever used and can be made…

Berlin Television Tower Christmas Tree Topper

Berlin Television Tower This model is a christmas tree topper of the tv-tower in berlin. Part 3 is printed in two parts. You need to glue them together and perhaps sand it a little to fit in part 2. Part 1 and 2 should snap together. If…

Televison de los simpson

las medidas son por dentro 15.5 de largo y de alto son 7.5mm

util mando television / soporte para mando television

Util para mando, se recomienda uso de soportes

Fallout High Tech Television 1/4 Scale

Wandering the waste land again, I came across this thing. I'd forgotten all about and inspired by the Radiation King Television - I wanted to do one more TV. This prop is just a gorgeous design - serious respect to the artists and…

1/10 Scale RC Clevis

1/10 Scale RC Clevis and Pin, Big and Small. Pin fits tight so no need to clip. Surprisingly strong.

Clevis pin m5x30

I needed one for slab nerf gun because kit was wrong. Can properly be resized to the other sizes.

Vintage Television

This is an easy to print television style enclosure for a 2.4" LCD or OLED, a push button and enough room for additional electronics (in my case a D1 Mini). Freely modeled after the set in the last photo. It is easy to print and can be…

Retro Television

This is a small retro TV that is meant to be displayed on a desk, shelf, or anywhere you please. This retro TV comes apart into the actual TV and the legs. The legs slide into the slot on the bottom of the retro T.V. I recommend using…

Slip hook with clevis

Slip hook with clevis and a pin

20th Century Fox Television

Evinrude Johnson 0322405 Electric Choke - CLEVIS, Plunger to lever

Evinrude Johnson 0322405 Electric Choke - CLEVIS, Plunger to lever Purchase at https://www.ebay.com/itm/133667880716

20th Century Fox Television Distribution (One Of the hardest Models i ever did)

Made it for my brother and uploaded for everyone to use

BLV MGN Matrix Mount with BLTouch support - remix of Ben Levis Mount

This is Just a Remix of Ben Levis Mount for the Trianglelabs Matrix for BLV MGN Cube

TV Stand for... televisions

Needed a stand for my Samsung television so the sound bar would fit under it and didn't want to follow the leg profile all the way. Therefore designed this general stand. There is a dovetail in the middle in case it's too large, just…

old television

old television

Žižkov Television Tower

Haptic model for the visually impaired, based on the book " Kamil – malíř snů " by Markéta Vítková. Read more about the project on PrusaLab's blog .

RC SERVO CLEVIS

material: PETG layer: 0.2mm 1piece time: 4minutes 10pieces time: 25 minutes hopefully youll be as happy as me when i finally could assemble my plane :D enjoy

Irreverent Television Frame

This model was created as a frame for wooden tiles collaged with images and text from vintage books and graphic novels to create irreverent juxtapositions created by artist Jamie Kratz-Gullickson.

retro television

retro television

Clevis mount toggle for LaZBoy power recliner

Printed flat on it's back without supports 100% infill and 4 perimeters, 0.2mm layer height. I used PETG for my print and expect it to last a while. It fit perfectly for my chair without any modifications to the part after printing.…

Rod end Clevis

Needed a clevis for the concrete finishing tools to go on the pole I already have. Standard threading for mop and handles, clevis with carraige bolt square on one side. 10mm slot width a bit beefy to deal with my use case

John Logie Baird Mechanical Television Demonstrator

John Logie Baird’s pioneering design for television utilised a mechanical Nipkow disk and analogue electronics to encode and decode video signals. This demonstrator highlights a key effect of the spinning Nipkow disk: when rotating at a…

GoPro Hero 9 - quick release clevis mount

Most GoPro mounts have one problem in common - they're tight, really tight and it can be a struggle to remove the GoPro when you need to change lenses, SD cards or access the menus, plus that problem only gets worse when its cold and the…

tv box support for LG television

Support to place a TV box or a lamp as in my case when using the TV as a computer monitor. It prints easily and without supports. It is printed in PLA. Material: Pla Layer height: 0.32 Printer: kingroon kp3s

Remote control mounting system for Apple and Samsung televisions

Welcome to Remotopia – The Perfect Home for Your Remotes! Tired of searching for your remote every time you want to relax? Remotopia is here to bring order to your entertainment setup! Designed and 3D-printed with precision using PLA…

Retro Television Set

Attribution: a massive rework/remix of a source file https://grabcad.com/library/retro-television . A probably-never-built TV set reminiscent of what might have been produced in the late 1950s. Print Settings Printer: AnetA8 Rafts: No…

Low Poly Television

Low Poly Television

Classic Television Name Tag

If the world is a show and everyone is a character, Show everyone YOU'RE protagonist with this AWESOME classic television name tag!

AW11 Clutch Pedal Clevis Bushing

Remove the slop from your clutch pedal clevis with this bushing. I recommend printing with TPU or ABS for the best fit

Supporto per telecamera SwitchBot Pan/Tilt Cam per televisore LG

Supporto per telecamera SwitchBot Pan/Tilt Cam per televisore LG

Printed Clevis Pin 38 mm

Printed clevis pin, 38 mm shaft. You might have to scale it a couple percent to make it fit tightly. They are sized to work with the SALz HPA Nerf Blaster. They are not properly tested, but they do fit and hold up to the handling I have…

Adaptador para soporte de televisión

He impreso este adaptador para sujetar mi televisión en un soporte VESA, ya que no coinciden los agujeros de montaje. Los agujeros se hacen a parte para cuadrarlos perfectamente.

DB8 Television Antenna - Guide Parts

This remix includes my modified part, along with a walkthrough of how I built my antenna. Mainly because the article linked in the original model listing is currently dead (as of 12/5/25). When I started this project, I had zero…

Television / TV Stand Fixation for Samsung AU8079

I put my Samsung television onto a rolling board. To avoid, that the television falls down, I fixed the stand with these printed parts. Mounted each with 2 screws. Can be printed without support structure. Probably also fits for other…

Sparton Logo For 50's Television

I recreated this classic cursive "Sparton" logo for Stellar Electronics ( https://stellarmasterwork.com/ ) to replace the broken one on the control door of a 1950's television he's refurbishing for a client. Total time to make: about 2…

Cover television connection cable Switzerland

Since I no longer need the connections and have a 9-month-old daughter who is interested in everything I have constructed a cover for the TV connection cable (Switzerland).

STAY HOME AND WATCH TELEVISION - CORONAVIRUS, sign

YOUR GRANDPARENTS WERE ASKED TO FIGHT A WORLD WAR. YOU'RE BEING ASKED TO STAY HOME AND WATCH TELEVISION. DON'T SCREW THIS ! Stay safe friends and I will see you all on the other side of this. Category: Signs & Logos

M16x1.5mm M8 Clevis for SC63x150mm

Clevis for any M16x1.5mm threaded pneumatic cylinder. This isn't meant for heavy loads, I'm using it for linear motion. I printed in ABS with .2 layers, supports and solid. Seems to hold up just fine for my purposes.

Leningrad television - logo

Logo na televizní přijímač Leningrad jako náhrada za poškozené. PETG -> nástřik zlatou barvou. Category: 3D Printers

AppleVisionProCompact Lens box

Simple round box with Sliding integrated cover. Designed to hold the Zeiss lenses for the Apple vision pro but could be remixed to hold lots of things. You need to use a tough material with a little bit of flexibility. Hard and brittle…

Wheel for shortening television antenna VILLAGE MOON–V900

Small wheel for shortening this TV antenna . It's used on campervan, but can be used anywhere. Might need a bit of modifying, because the teeth don't allow the antenna to stay paralel. Printing instructions Layers: 0,20 mm but doesn't…

Low Poly Television

Low Poly Television

Clevis Pin Joint Assembly — DIN 71752 / ISO 8140 / GOST 9601 | WebCAE

Three-body clevis pin joint assembly: fork clevis, eye lug rod end, and cylindrical shear pin. Includes three STEP variants: • d12: pin Ø12 mm, total width 31 mm • d20: pin Ø20 mm, total width 52 mm • d30: pin Ø30 mm, total width 77 mm…

Applevision 1710 (AV) & 750 (AV) CRT Replacement Buttons

The original buttons in these monitors are very fragile. These models serve to replace them. Printed in Polar Filament "Retro Platinum" PETG with a 0.25mm nozzle. WARNING: Working inside a CRT can be lethal. Additionally, the plastics in…

CRTelelele V1 - A CRT Television Ukulele Synth

Using 4 linear Softpot potentiometers from spectra symbol, a 5in Action brand CRT with a black and white video port input, an Arduino Mega 2560, a low pass filter, and a .96in OLED screen, PWM waveforms are modified with DSP effects using…

AW11 Clutch Pedal Clevis Bushing

Remove the slop from your clutch pedal clevis with this bushing. I recommend printing with TPU or ABS for the best fit

Retro Television

This is a small retro TV that is meant to be displayed on a desk, shelf, or anywhere you please. This retro TV comes apart into the actual TV and the legs. The legs slide into the slot on the bottom of the retro T.V. I recommend using…

Low Poly Television

Low Poly Television

Žižkov Television Tower

Haptic model for the visually impaired, based on the book " Kamil – malíř snů " by Markéta Vítková. Read more about the project on PrusaLab's blog .

Levis classic logo (without MM)

Levis logo

Intellevision Display Stand

A stand to display your Mattel Intellevision

Intellevision Cartridge Stand

Intellevision Cartridge Stand

50's Art - The Console Television

50's Art - The Console Television 3D printable model.

50's Art - The Portable Television

50's Art - The Portable Television 3D printable model.

EagleVision Gopro 7 Lens Cover

if you have changed the lens of your gopro camera to eaglevision lens then this is the cover for you

Puzzlevision Logo

Mr. Puzzles, also known as the Mysterious TV Guy, is a major antagonist of the SMG4 series and the main antagonist of the PUZZLEVISION story. Logo made by @G_Coder

RC Plane E-flight Clevis for Push rod

Simple replacement for the original E-flight clevis for the 1.3mm threaded push rod. I use it on my Conscendo Evolution, but should be same for other planes too. I included multiple hole sizes to make it work with your printer, it should…