Liczymy pasujące modele…
A simple drive bay for 4 Dell 3,5" LFF HotSwap HDD caddys. The SATA/SAS Connetion at the back is not mounted, the rear of the HDD is exposed to plug in manually. Fits a 120mm Fan on top for cooling Printing orientation: on its "back" with…
This is a functional replica of the Dell G13 server drive caddy (model F238F ) designed for 3.5" LFF hard drives . Precision Tolerances – The screw heads for drive mounting must not exceed 1.25mm in height (use M3 screws ). Modular Design…
The adapter is designed to be used in a 3.5" (LFF) bay, fitting a 2.5" (SFF) SATA/SAS HDD/SSD drive. The interface connectors of the 2.5" drive will be positioned where the connectors of the 3.5" drive would be. It has all the mounting…
Adapter for Dell Drive Bay Caddys. Similar to Dell : 09W8C4, 0Y004G & 01Y05J on the Middle part is a screw hole for the 4th 3,5" screw you also need 4 m3 screws for the 2,5" drive should work on : PowerEdge R310, R320, R410, R415, R510,…
For the famous (and nowadays super cheap second hand) Supermicro CSE-815 1U server chassis, I designed a hard disk caddy (hard drive tray) for 3,5 SATA/SAS HDDs. I build a caddy / tray based on the original HDD MCP-220-00001 drive tray…
3x 5.25'' bay to 5x Dell LFF drive cage
Since the official HPE price for a 4xLFF cage exceeds €200 in my region (Slovenia | EU), I decided to make my own. My server already has an 8xSFF HDD cage, so I designed an additional cage for LFF drives to prevent them from being stacked…
Remix of https://www.thingiverse.com/thing:3918011 I used it to mount 2.5" Drives in the 3.5" Caddys of my Dell PowerEdge R520/R530/R630. But they should also work in other Generations and Brands of Caddys. I optimized the Design a bit…
Wand- oder Decken Halterung Kompatibel mit Samsung "The Freestyle" 2nd Gen. Projektor LFF3C (2023). Sollte der Freestyle Projektor noch gedreht werden nach dem Befestigen, dann die mittlere Bohrung verwenden, dann ist man flexibler.…
This caddy should fit at least for the following Huawei Systems: RH2288H V3 RH2288 V3 RH5885H V3 RH5288 V3 To my knowledge there is currently only one type of LFF caddys huawei produces, so the should also work on other systems. For…
twisted eiffel tower for decoration
LFF 3.5 SAS/SATA caddy. You need countersunk screws. 2pcs M3x6 or longer countersunk screws to assemle the parts. 4-6pcs 6-32x6 countersunk screws for the 3.5 HDD or 4pcs M3x5 screws for 2.5 HDD. With the 3.5 to 2.5 adapter you can put…
An adapter for 2.5" drives for a 3.5" caddy. Should be compatible with: * PowerEdge R310, R320, R410, R415, R510, R515, R710 * PowerEdge R320, R420, R520, R720, R720xd * PowerEdge R630, R730, R730XD * PowerEdge R740 I've attached the…
Designed to replace caddy model 72CWN this is not for regular servers, only compellent disk shelves
A decorative hexagonal wall shelf designed to be mounted on a wall. It primarily serves as an interior design element and is suitable for displaying small decorations, souvenirs, or other lightweight items. The shelf features three…
Anarhichas lupus – Atlantic Wolffish (3D Model) This model represents the Atlantic Wolffish ( Anarhichas lupus ), a powerful benthic predator found in the cold waters of the North Atlantic. Known for its massive head, muscular body, and…
BACKGROUND: I'm using a Wolffilms Smartphone Dashcam Holder within my car as a smartphone mount. Unfortunately, the small connector piece between the suction cup mount and the smartphone mount broke some days ago so I decided, that this…
When we purchased our sofa off Amazon, it didn't ship with enough connectors to attach all the sections in the configuration we wanted to use. The model is best printed in PETG and should be laid on the flat side so as to leverage maximum…
The stand for the portable coffee machine and Nespresso capsules (5 sleeves * 4 pts each)
I got a cheap HPE Apollo 4200 Gen 9 for relatively cheap, after I got it, I realized that it requires special caddies and does not use the normal Gen 9 Caddies. As there was no model yet published for LFF ( 3.5 ) disks, I bought one…
Matriz para hacer moldes en caucho de silicona - Modelo BULL DOG Frances
Cold-swap LFF bays for DL380 Gen10 SFF Chassis. Uses Secondary Riser Blank for mounting. Requires 5ish small zip ties, and some 1/8" thick foam tape. Note that it is not symmetrical. it will only fit correctly one way. (look thru the…
this is the best fortnite case of all tim euse all white for it and it will look perfect .
Modification of right side rail https://www.thingiverse.com/thing:6423950 Length extended to accommodate extra mounting holes for 2.5 inch drives, Compatibility with 3.5 inch drives is unchanged. To mount 2.5 inch drives you will also…
the print turned out great and was really good, its some work to put the chain on
Here's a cat head piece that works with Tinkerplay. It should, anyway. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bEsMweKPTgB Category: Model Robots
If you sell, own or work on Wolff brand e-bike, then you have probably seen this knob for the battery release break. The knob just crumbles over time for seemingly no reason. I work for a dealer and own a Vela, when i went to remove the…
i had some people not be able to find them so i have re-uploaded them here these are not my designs
I got a cheap HPE Apollo 4200 Gen 9 for relatively cheap, after I got it, I realized that it requires special caddies and does not use the normal Gen 9 Caddies. As there was no model yet published for LFF ( 3.5 ) disks, I bought one…
Self explanatory. SFF to LFF converter for two SFF drives. Use print softwares mirroring to print other side.
Test printed fine without supports, but did need brims
Modeled from the ground up for accuracy and 501st approval, this Commander Wolffe helmet is the perfect addition for anyone wanting to 3D print their own wearable helmet. The Helmet files include: - Assembled, casting, and solid versions…
If you sell, own or work on Wolff brand e-bike, then you have probably seen this knob for the battery release break. The knob just crumbles over time for seemingly no reason. I work for a dealer and own a Vela, when i went to remove the…
i had some people not be able to find them so i have re-uploaded them here these are not my designs
Print 2 blads pr disk you want to mount. one fan shield covers/cools 3 disk. (80mm fan) the middle screw locks the disk together. omit it and the disk can beliftet apart, but not slid apart. print 4 foot, and add a rubber paddy to it, to…
This is my version of a wide clamp for the Wolff Twice-as-Sharp scissor sharpening system. this is for sharpening chisels or plane irons. I didnt want to pay the ~$80 for the factory clamp.…
