41 modeli
Added 10/11/2025 V3 rim center w/o connector parts (Schraubverbinder) (Felgenschüssel ohne Schraubverbinder) and suitable tire with M3 metric threads. Printing the threads in tpu might fail but then you can just screw them in. Threads for…
The original Worx cutting disc size is 145mm, with original blades the full cutting width is 175mm. There are other versions around but mostly for older Landroids. I wanted to create my own and also make some changes to the original…
Here is my first post, after 1 year spent with my robot mower, I noticed that the wheel at the front deserved to be improved. So I tried to raise it and widen it. it is therefore suitable for the Landroid M500+ WR165E series . Print in…
!!! The use of the parts is on your own risk, no liability for injury or damage. !!! Custom knife plate for Worx Landroid M500 (WR165E, model 2020) with 5 blades. Can be used on all cut height settings. After printing of the plate part,…
I got a request from Neistsch to modifying my existing thing to fit the Worx Landgroid M500 series, so over a week or so of emailing measurements, images, test parts etc. we finally got the wheel fitted and adjusted to work. The images…
(19.07.2021) update : added a 35mm stand receiver This is a remix from the amazing idea of Alexandre Valentim on Focuspulleratwork forum to have an easy way of organizing and storing wcu rings on your focus station. I've modified the…
Update: bei den Teckerreifen 5 gibt es jetzt eine linke und rechte Version. there is now a left and right version of the Teckerreifen 5. Hallo, ich habe uns ein Rad und separate Reifen konstruiert. Du brauchst dann in Zukunft nur noch den…
Spoiler für Worx WR165E M500 mit Batteriefach. Der Spoiler wird hinten auf das Batteriefach geklebt. Ich hab es mit Heißkleber gemacht. Der Knopf für das Fach ist immernoch erreichbar mit einem schmalen Gegenstand. Der Spoiler hat nur…
The original clips to hold the filter closed broke, so I designed a 3d printable replacement. It's a pretty tight fit, you may have to upscale it in the slicer a couple percent if it's too tight for you. It has a notch so it clips in…
UPDATE : You can now purchase an improved version of this prop from Blue Robotics! Users should note that this version is slightly larger, and can cause the M500 to draw more than 40A, above the rated current for the motor. This makes…
This is a replacement for the original rubber sleeve on the front wheel. It seems to improve the maneuverability and therefore gets less stuck. Printed on a resin printer (ABS Like Resin) but FDM prints will work just as good.
Felge für Worx Landroid M500 WR164E Den Reifen habe ich vom User Daniel übernommen ---->>> Download WICHTIG!!!! Der Reifen MUSS auf 98% der Ursprünglichen Größe gedruckt werden sonst passt er nicht auf die Felge!!!!! Link zum Spoiler
Hallo, ich habe einen Schutz für das Vorderrad von einem Landroid M500 konstruiert. Der Landroid wir vorne 6mm höher. Ich habe es mit TPU (Extrudr Flex Medium A98) gedruckt. Ohne Infill, mit Wandstärken 5. Viel Spass damit! Hello, I have…
Hier haben wir einen Spoiler für den Worx Landroid. Passend für alle Größen wie M500, M700 oder M1000. Ich habe den Flügel in PLA-Orange und die Halter in schwarzem PLA gedruckt, hält schon den ganzen Sommer und verformt sich nichts. Ich…
I tried out many different concepts from the internet but none of them was suitable for my machine. So I designed a system from scratch and am very happy with it, feel free to modify it ( .f3d and .step files are included). Please tell me…
This is a replica of Tektronix part number 214-1593-02 which is no longer available. This barrier key snaps onto the EDAC card edge connector that is used in TM500 series power supplies. It prevents incompatible plugins from being…
I was tired of having the extra batteries for my Sony A77ii getting lost in my camera bag. This holder keeps my 3 spare batteries together for easier access. Also, putting charged batteries with the contacts facing down and putting spent…
This is an updated version of the battery holder for NP-FM500H batteries that I designed previously here: https://www.printables.com/model/449469-np-fm500h-battery-holder The previous version lost its grip on the batteries over time. So I…
I had a problem on my bike when my chain from time to time fell off during landings. So I have utilized mounting holes on my Bafang M500 engine to design a simple chain protector. It is held in place by 2 M4x12 screws. I have printed it…
Might need to drill the hole to 3.15 - 3.2 mm.
🛠 About This Model This is a simple protective frame designed for the Worx Landroid M500 Plus (and possibly other Landroid models) to help prevent accidental pressing of the stop button—especially when the robot moves under objects like…
This replaces the mechanism of a tm500 door handle for RV cargo handle measuring 5" by 4.5". (Might fit others too) Original part are 3 white prongs with snap in/friction connection. I couldn't find the replacement part alone nor a seller…
The motor broke on my cyberbike. Turns out you need some special tools to swap it out. This design is the tool to properly remove the nut that holds the sprocket mount. Note you also need a crank puller to remove the crank arms. This is…
Leica wanted to charge me a small fortune for a darkfield slider, so I made my own. This darkfield patch slots directly into the Leica Slotted Abbe Condenser (Leica Part Number: 13 613 550) common to the Leica DM500 and DM750 microscopes,…
skinny holder for a tektronix plug (AM503 current amp is what I use it with, but any TM500 module ( http://www.barrytech.com/tektronix/tektm500/tektm500.html ) should work. I don't have the tektronix power supply where this TM500 plugs go…
The Tektronix TM500 is a modular test equipment system offering a variety of plug-in modules that fit a dedicated series of mainframes with one to six module slots. This is a blank panel cover for one of its 6 open bays. The inset on the…
Felge mit Hinterschnitt, damit diese auf den M500 bzw. M500 Plus passt. Räder werden vom original Ersteller verwendet und funktionieren super. Wegen der Radgröße ist eine kleine Änderung am Gehäuse des Worx notwendig. Fällt aber kaum auf…
Battery Charger Stand NP-F550 F750 F 950 FM50 FM500 Battery charger Gridfinity stand. Added Hull Line Remover Space Print with PLA, PETG any speed, I added Hull line remove Space
Heyhooo This is a shock absorber I designed for the Petromax LM500 . https://www.youtube.com/shorts/hlhutxKBYMc The Problem Quite soft impacts from the direction of the battery axes are enough to temporarily disconnect the power supply.…
Ein wenig Fun.... Elektronisch wird das Projekt noch erweitert, da mich ein oder zwei dinge noch stören. Die 5V liegen leider dauerhaft an der USB Schnittstelle an... hier möchte ich noch ein Relais verbauen, was von der…
Hey there, Makers! 👋 Get ready to print your very own Ensis M5000S , a super cool toy rifle inspired by the sleek and elegant design of the ORSIS T5000M. This isn't just any toy; it's a fully functional model that uses a rubber band…
Heyhooo This is a shock absorber I designed for the Petromax LM500 . https://www.youtube.com/shorts/hlhutxKBYMc The Problem Quite soft impacts from the direction of the battery axes are enough to temporarily disconnect the power supply.…
A mount for a RBM500 battery monitor so it can be mounted on a flat panel
Wall mounting box for Renogy RBM500 battery monitor display. Use two medium size 3M command strips to attach to wall. Printed in PETG with 0.4mm nozzle, 0.20mm layers, 3 walls, 7 shell layers, 15% gyroid, slow 80-120mm/s speed for better…
Battery holder for Sony FM-500H. Print Settings Printer: Rebel 2 HD Supports: No Resolution: 0.2 Infill: 20 Category: Camera
I could not find an individual case for the NP-FM500H battery for the Sony a68 camera so, I found a similar enough case and remixed it to fit my battery. As I was printing it I realized that I had measured it wrong and made it longer than…
Normaly you can't use the build in scale in a Rommelsbacher EKM500 grinder, when placing a portalfilter under the output. This is a little simple tool for using a 51mm portalfilter basket and mesauring the output weight during grinding…
With inspiration from Thing 773512 I created my own battery holder for Sony a77ii battery FM500H. 2018-08-19: v2 uploaded: Slighly better fit and completely new made STL. Better slicing and printing. Print Settings Printer: Velleman…
