Filter Clip for Maytronics Dolphin M500 Pool Cleaner (And possibly other models)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3d printed filter clips to replace broken original ones.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 146
- Wydruki
- 0
- Wyświetlenia
- 597
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
The original clips to hold the filter closed broke, so I designed a 3d printable replacement. It's a pretty tight fit, you may have to upscale it in the slicer a couple percent if it's too tight for you. It has a notch so it clips in place very nicely.
I printed it in PLA(+) and it works fine, but over time it deforms so I have to print new ones every couple months. PETG or other stronger filaments would probably work better.
PRINT SETTINGS
- The more walls the better, I used 4
- Top/bottom layers are the same, I used 6
- Print flat on the side, no supports needed
Post a make and/or comment any improvements/suggestions you have, I appreciate it!
As with all my models, if you wish to sell these please get in contact and we can sort something out