Liczymy pasujące modele…
ENG: Vertical stand for Lenovo USFF Tiny PCs. Works with M700q, M900q, M710q, M900q and presumably oder and newer variants like M720q and so on. As long as the PC is not thicker than 36mm. Made with Tinkercad. GER: Ständer für Lenovo USFF…
The rack mount can be printed standing on its front side without supports. There are holes on the rear side where threaded M3 inserts can be installed, enabling mounting of the retention clips with M3 screws. For more details, please…
Remix of MyStoopidStuff's Under Desk Slide Out Mount For A Lenovo M700 (also fits the M93p and P330) Tiny PC Really liked the design and fit but needed a rack mountable solutions, step file included incase anyone wants to make their own…
A shelf for the universal 10-inch rack project, using either commercial rails or 2020 extrusions, for the base frame.
This model consists of three parts: case body, lid and lightguides. BOM The following items are needed for one case: 1x printed body 1 x printed lid 2x lightguides 2x M4x10 hexagon socket head cap screw(DIN 912) 1x SP11 Panel Mount…
This is a simple yet effective bipod for my arisoft sniper ASG Zastava Varmint M70. I made this using Solidworks 2016 and it works very good until now. It could be used on any sniper rifle like VSR10,Varmint M70 etc or with any sniper…
Just a wall mount for the Logitech M705 wireless mouse. I was doing some organizing and decided to make wall mounts for various items.
These things are the most fragile part on the headphones. Hope this saves someone the $100 for the headband. I modelled the right one using Onshape and mirrored the left one. I got the best results printing it with tree support and brim…
ENG: mount a LENOVO M700q or M900q under a table, cupboard or wherever it fits. the nodge fit the rubberfeet, so the PC can't slide out. print the adapter four times. made with Tinkercad. GER: mit vier von diesen adaptern lässt sich ein…
Hier habe ich eine neue Version für den Worx M700+ erstellt. UPDATE: V2 Slim zum Download bereit Er hat nun 7 Messer die mit einem zweigeteilten Messerteller verschraubt werden. Diese Teilung habe ich gemacht weil es damit einfacher zu…
I have painted the case of the Landroid M700 Plus. To save the colored side behind the black cover i have designed these bumper and taped it with some double sided tape inside the case (see pictures). I printed it with TPU, to spare the…
My second hand Lenovo M900 Tiny did not come with any mounting hardware for the SATA drive. The drive was just hanging mid air. Discovered this will also fit the M700 as well. Installation is a breeze. Removing tray, however, may be more…
Es handelt sich um eine Halterung für ein Lenovo ThinkCentre M700 Tiny. Diese ist so konstruiert dass das ThinkCentre von der Seite reingeschoben werden kann. Zur Befestigung befinden sich pro Halter zwei 4,5mm Löcher mit 2,2mm Fase damit…
Mocowana w miejscu oryginalnej stopki. poprawia chwyt
stopka magazynka do m70
KJW M700 Barrel to M14 CCW Thread Adapter Fits (snugly) over the unthreaded KJ Works M700 Rifle and adds M14 CCW threads for threading on muzzle devices (E.g airsoft tracer). I made the sleeve that fits over the barrel long so it covers…
Hier haben wir einen Spoiler für den Worx Landroid. Passend für alle Größen wie M500, M700 oder M1000. Ich habe den Flügel in PLA-Orange und die Halter in schwarzem PLA gedruckt, hält schon den ganzen Sommer und verformt sich nichts. Ich…
Created this for our Lenovo M700 PC to mount the power supply below our sliding keyboard/PC rack in our CNC control cabinet. Once secured to surface, it grips the brick snug and doesn't slide. Print with “I” face to build plate. Supports…
Držák kamery pro hasičskou helmu Gallet
Model of the factory cam alignment block for the BMW M70, M73, or M43 engine. Print two for the V12s. Make sure to dial in your printer/filament so that the holder fits snugly on the cam. Faces chamfered to reduce elephant foot, corners…
Recreated the loop for my Plantronics wireless ear bud. The piece was clear, so I painted it black and took a picture of it. Then I converted it to a SVG and imported it into tinkdercad. From there I re-drew it to add roundness to the…
Wall mount for a CM700. Take the base plate off it slides right in. There are little plastic nubs under the original desk foot that I clipped up. would likely be resolved by scaling up 1 to 2%
Caddy for 3.5" and 2.5" hdd
Reifen in TPU ohne Stützen Deckel in PLA oder PET mit passenden kl. Spax zusammenschrauben
TTGO T-PCIE with SIM7000G module: I was not able to find any CAD models for these two lilygo modules so I created my own. I had to measure everything myself which might have caused some inaccuracies in the placement of the components or…
This part mounts to a M70 Samsung monitor to provide a shelf to place a small speaker on. In this case a Bose mini bluetooth speaker. This mounts in place of the Montior stand so is only useful if you have the monitor mounted on a arm and…
Držák pro kameru MiVue m700 na přilbu dräger HPS 7000 který zapadne do adapteru pro svítilny ADALIT a PELI. Univerzál pro levou i pravou stranu, nevadí kandaharu - pěkný záběr i pro nasazené masce. Doporučeno: 5 perimetrů.
For replacing broken belt clip on your Snom M70 handset
Remixed original to add a mount for an optical (portable DVD) and external HDD, both on rails so can be taken off as needed. Optical drive mount
Behold, the 2x superdrum70 to double stack magazine neck! For use with MisplacedMoose Meuce double stack double feed compatible blasters. it is a work in progress, and my current version has some problems with friction, which I suspect…
I have painted my case of the Landroid M700 Plus. I dont like the orange driving around in my garden. To complete the painting, i have printed these Caps and taped it with some double sided tape. Print is easy and fast.. Print settings:…
The M705 is held snugly so it doesn't easily slide out while in my backpack. I've been using a print of this for over 7 years and it has held up very well.
I needed a simple way to label multiple Lenovo M70q PCs in an office without screws or adhesives. Since I couldn’t find existing designs, I created these snap-on labels myself! Details: Blank & Customizable: The label has no pre-printed…
Plastic adapter for Lenovo ThinkCentre M600 and M700 tiny PCs to mount 2.5" SSD or hard drive. Not the same design as the original part but it is designed for easy 3D printing while maintaining the same general functionality. You will…
3x2x4 shadowbox bin that fits a Logitech M705 Mouse
Parametric OpenSCAD design to generate enlarger masks for Durst Sivoneg/Sinoneg/Sirioneg/Unineg carriers. Print two to sandwich your film, or print one if you have a sheet of glass in your carrier.
Laser tube extension protection for Redsail M700 Instructions The base has screw holes ready for m3 screws from the backside. Then print as many extensions as you need for your tube and finally print a cap. Category: Parts
Just a simple bracket I threw together in Fusion 360 to hold my Logitech M705 mouse under my coffee table. The touchpad on the K400 is nice for couch browsing most of the time, but a real mouse is nice on occasion. Print Settings Printer:…
I bought a Global M704 microscope and don't need to use the halogen fibre optic illumination. This model will screw in and plug the unused fibre socket on the microscope body, keeping dust and light out. This model will probably work on…
I bought a used Global M704 microscope, and the objective lens did not have a cap. This model fits snugly when printed in PLA. The lens on my microscope is M1028-250, but I think it would probably fit any of their objective lenses.…
The positioning of the screws for attachment to the tripod is “relatively unfavorable”. To Loosening or tightening with the Allen key. This tool helps to simplify tightening or unscrewing - see pictures. Printing PETG recommended, Nozzle…
mounting bracket for tp link m7005
This model is a Samsung remote control case. It's recommended to use TPU for printing; attaching it to the surface with silicone double-sided tape will provide a more stable finish.
Stand for Gorenje SM703GCB multimaker plates that I made. It can be printed in one piece on Flsun SR. Fits 6 plates/inserts that have the following size: 223 x 125 x 9 mm.
Wall mount for Netgear CM700 modem with cooling slots.
printed on a Creality K1C, 0.2 layer, 0.4 Nozzle, Rafts yes, Support for the vent holes
Description Custom mounting kit for the ABM700 and Ontario LittleDreamCatcher baby monitor. Includes a standard flat plate and an angled wall mount for a better view of the crib. Both models feature the specific twist-lock geometry for a…
For Axis Camera that is included with M7001 encoder MK4 Enclosure. Watch your print. Compatible with LED light. Need to supply a small screw to hold in place (hole in print) goes through existing middle hole
OEM part is made of bakelite, and being over 50 years old now, it was too brittle and broke into pieces. I designed a 1 to 1 replacement (mk1 parts) and a new one (mk2 parts) bulkier and easier to print, with built-in cable clamp. If I…
This is a 3D-printable replacement for the tilt-axis bearing support used in the Big Dipper LM70S moving head light. The
These things are the most fragile part on the headphones. Hope this saves someone the $100 for the headband. I modelled the right one using Onshape and mirrored the left one. I got the best results printing it with tree support and brim…
A snug travel case for your Logitech M705 wireless mouse. Print the case body on the butt, so that the opening is facing up. The lid is available with and without the Logitech text.
Description Custom mounting kit for the ABM700 and Ontario LittleDreamCatcher baby monitor. Includes a standard flat plate and an angled wall mount for a better view of the crib. Both models feature the specific twist-lock geometry for a…
3x2x4 shadowbox bin that fits a Logitech M705 Mouse
I bought a used Global M704 microscope, and the objective lens did not have a cap. This model fits snugly when printed in PLA. The lens on my microscope is M1028-250, but I think it would probably fit any of their objective lenses.…
I bought a Global M704 microscope and don't need to use the halogen fibre optic illumination. This model will screw in and plug the unused fibre socket on the microscope body, keeping dust and light out. This model will probably work on…
A snug travel case for your Logitech M705 wireless mouse. Print the case body on the butt, so that the opening is facing up. The lid is available with and without the Logitech text.
That's it. You can light up the PCB you are looking at
UPDATE 8-20-2021: I updated the latch after using the same design on a Pi4 holder (posted here: https://www.thingiverse.com/thing:4936218 ). I have not tested this model, but I did test the latch using the Pi4 holder and it worked there.…
UPDATE 8/20/2021 : I posted an (untested) remix of this with a quick release latch to keep it from sliding out easily. You can find it here if you want to test it out: https://www.prusaprinters.org/prints/79591 I tried posting this…
I bought a Global M704 microscope which came without eyepiece cups. For this microscope your eyes need to be a pretty specific distance from the eyepiece otherwise it's basically unusable. This model is intended to replicate the M1039A 1…
