Liczymy pasujące modele…
NOTE: This model is designed for a US Plug shape. I needed a simple & elegant wall mount for the HomePod Mini in the bathroom. I found several models on Esty ( SmartHomeEngineering & BurdProducts ) that I mostly liked but they didn't…
This is an HomePod Mini stand, inspired by HomePod Stand by FANBOY by malencar https://www.thingiverse.com/thing:3943055 and HomePod mini wall mount by bu11wei https://www.thingiverse.com/thing:4712032 I mostly combined these two. Please…
Remix of the "floating" outlet wall mount for the Apple HomePod Mini, now made for European Plugs.
A detailed description of the project is available on my homepage (in german): https://100prznt.de/pool/skimmer-am-rechteck-frame-pool/ Print instructions For long durability and tightness of the wedge, it should definitely be printed…
I made this so I could mount a HomePod mini to the wall in my daughters bathroom. It can be mounted using either 2x 3M adhesive strips or screws. I've personally used the 3M strips. When printing be sure to enable supports on the back…
This is a stand to raise the HomePod mini a little bit from the table, ground. The cable can be routed on the inside of the stand. Print instructions nothing special
Eine Klemme für die Abdeckplane unseres Pools. Gedruckt in PETG A clamp / clip for the pool cover. Printed in PETG
Introduction: I designed a three part wall mount for my HomePod minis. The parts are: Wall Plate: Secures to the spot on the wall where you want to mount your HomePod mini. Note the arrow indicating the correct orientation. Gripper Plate:…
Original Design by Erlbeck https://www.printables.com/social/273939-erlbeck/about Decided to print with a .8 nozzle at .6 layer height in PETG. Looks alright to me.
Most HomePod wall mounts I found had a baseplate that was actually obstructing the high frequencies of the sound when mounted overhead. So I designed this one with the smallest base possible. The HomePod holds fine on its own but you…
This tripod is made in 2 pieces: Main Body Leg (Print 3 times) This Model can be printed without supports. I recommend the use "super glue" to glue the legs to the main body. 3D printing settings Body: Resolution: 0.2 Supports: No Infill:…
A planter that looks like a HomePod mini! Perfect for the apple enthusiast. It has a small hole at the bottom to allow water to drain. Also added a model without the drain hole.
This is a wall outlet cover that has a removable shelf for the HomePod mini. It compactly hides the cable inside and creates a nice, stable shelf for the HomePod while keeping the other outlet free for use!
This part is meant mainly as a reference for your modelling projects of Homepod Accessories. You might be able to print this as well, but I haven't tried it myself. The outer mesh covering is something that is not yet properly done in…
Layer Height: 0.15mm Support: Only needed on the hook Perimeters: 4 * Alternatively, use modifier to increase perimeters of the hook to 6-8, and 2 on the main body Material: PLA is fine, but PETG for extra durability of the hook. I enjoy…
Version 1, fits ok…
Inspired by the look of the Apple HomePod Mini and a post I saw on Reddit. Believe it or not it was designed in Tinkercad. I printed it @ .3mm layer height which I think gives the lattice pattern a nice textured look.
Hello Everyone From the beginning of using HomePod Mini, I did not like its position because the screen is not visible from a greater distance. So I decided to design a stand for it so that it would be placed in a horizontal position. I…
I made a HomePod Mini in Fusion 360 for you to use in your Designs, so you can make your own HomePod stands and accessories. I put the CAD file in the downloads as well as an STL enjoy
Simple Apple HomePod Mini Wall Mount – No Supports, Speaker-Friendly A refreshingly simple HomePod Mini wall mount that does everything the others don't. After trying the existing options — all either too complex, needing supports,…
This wall mount is designed for the Apple HomePod mini to mount this with the charger plug to the wall, no screws are needed. The long (but not long enogh) cable can stored in the front container part. All parts are printed with supports…
I needed a way to get my HomePod Mini off of the counter, hide the cord and power brick, and still leave access to the other outlet! Print this, remove the wall plate, and attach the print with a single screw. The cord threads through a…
I couldn't find a mount that scratched my specific itch, being simple and wall mountable by screw. This mount will fit the HomePod safely but not super tight, it is easy to get it in and out again (just be sure it's in reach of a wall…
Ich habe mir hier ein Stand für den Apple homepod mini Konstruiert --------------- I constructed a stand for the Apple homepod mini here
The Apple HomePod Mini does not have a removable power supply cord so it cannot be shortened. In some installations, this leaves several feet of cord to deal with. I designed a container that will house the excess cord. The container…
Designed up this Wheatley theme for the HomePod mini. All surfaces that are important, such as the outlets of the acoustic waveguide, the microphones and both speakers are cleared out. Even the humidity/temperature sensor is cut out to be…
Top surface is 150x150mm. The cable pass through is 15mm in diameter. The shelf is 80mm high (the part that mounts to the wall). The screw holes are for M3.5 countersunk screws.
I was too lazy to replace my office duplex outlet with a GFCI or combo one, so I modified this design. If you use the sliced file, I tried to keep the supports to a minimum. Thanks, Jordanburgy, for the great design!
Since the HomePod mini's driver fires downward, I opted against using a standard shelf design so that the audio would project against the wall and spread more evenly across the room. You'll need some M3 nuts and 8 mm socket cap screws,…
HomePod mini wall mount Simple design for HomePod mini wall mount.
This is a holder for an Apple HomePod mini that allows you to screw it into a standard recessed light fixture (or any other light socket). It not only mounts your HomePod mini to the ceiling but provides power! All without impacting sound…
HomePod Mini Stand
Maße = Höhe: 60mm Breite: 100mm Radius oben 85mm
It's the Remix of the moste Beautiful HomePod Wallmount. I made it with a cable Hole and to fit it with a HomePod Gen2.
The power supply fits exactly into the foot with a euro socket. I've uploaded the step data if anyone wants to make it a little bigger.
Ce support surélève le HomePod mini de 20 cm. Il est équipé d'un passage de câble dans le tube. Paramètres utilisés pour la fabrication Buse 0,60 mm Hauteur de couches 0,30 mm Périmètres 3 Couches solides Dessus : 4 / Dessous : 3…
Requires Magnets with a 6mm diameter and 3mm thickness. Moreover a M3x12 Screw (or longer) + M3-Nut is needed, that fixes the hinge of the MagSafe mount. On the bottom there are 4 places for felt stickers (20mm diameter, 3mm thickness).…
A socket for the Apple HomePod Mini with cable guide. V2 has stronger cable holders
Habe eine verstärkte Version erstellt.
This is a modern Apple Homepod Planter with inner diameters of 80mm, 110mm and 140mm. It looks good with succulents but also works with other plants.
I realy Love the Original from adrianjwright. But The Original dont fit my Gen2 Homepod. So i Remixed it. You need to Print it with Support.
The clamps are made for 18mm mounting area. You can change the z scale to make it taller or smaller as needed. It has M3 holes, so you are able to use them to assembly and hold to the desk. You will need to print two clamps for it. If you…
Print as is with any infill, I printed on my X1 Carbon
The mount allows you to place HomePod mini on your bed. The sound with two HomePods is incredible when lying down.
A case to hold gameport adapter with pro micro with USB-C port. Check the project here: https://github.com/necroware/gameport-adapter
https://github.com/necroware/gameport-adapter Necroware released this pretty great gameport joystick adapter PCB and software. It's the most comprehensive design I've seen, including some custom one offs I've build with direct wiring to a…
A small and simple stand for the Homepod Mini for mounting at the socket. The hole for the plug is really tight so that the mount holds well at it. So maybe you need a bit force. I printed the model on the side without any supports. This…
I wanted to hide the HomePod Mini's power cable without any "fancy" artifacts, so I came up with this design where you could hide the cable inside the stand and as a bonus get a little more bass thanks to the empty stand enclosure. Print…
Layer Height: 0.15mm Support: Only needed on the hook Perimeters: 4
The Intelligence Dampening Sphere , more commonly known as Wheatley , is a personality core of masculine programming and English West Country accent who appears in the single-player campaign of Portal 2 . Siri is the digital assistant…
An extended height version of a waffle plant pot. It looks like it could have been an apple plant pot and looks very nice on your desk. Category: 3D Printing
Holder for an Apple HomePod mini, meant to be wall-mounted. There is space in between the two pieces for cable management. Two options for the backplate: A) the cable comes out through the bottom of the enclosure; uses 6 M3x8 screws (3…
I wanted to hide the cord where my HomePod mini is mounted on the wall so I created this bracket with a hole and slot to feed the cord into a hole in the wall. You will need a hole about 11mm in diameter to get the end of the cord…
Printed in Marble Grey PLA. I recommend this cable organizer to make everything tidy: Simple Cable Organizer. by DFV Tech | Download free STL model | Printables.com
A template for marking holes (wall plug, diameter 6 mm) in the wall for mounting the bracket.The holder is made of PLA material.
The original HomePods have very little accessories still available for them since they are discontinued , so I was happy to find something remotely close to what I was trying to accomplish. I took the base of their model, removed the…
This is a remix of a stand created by @Hasenpups extending the model for extra clearance. A HomePod Mini sitting on the 6.5 inch stand is 9 inches tall.
Hier ist ein Kabelclip für das Kabel des HomePod mini. Einfach mit doppelseitigem Kleber an der gewünschten Stelle fixieren und das Kabel eindrücken.
Stand for all kinds of smart speakers. It can also be used as a stand for flower pots or other items.
Works with standard pegboard, perfect for jamming out in the hobby room.
Homepod Mini holder and headboard hanger mount to secure homepod mini to a headboard without needing any screws into the wall or headboard itself. A cable chase is integrated into the mount to hide the cable up and over the headboard so…
Good looking and stable Stand for HomePod Mini Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: 0.2 Filament: any PLA any Category: Audio
I could have bought one on amazon for $14 but no, I spent an hour designing one in blender and 4hrs printing on my Prusa MK3S+. I printed in PETG 25% infill with supports. Note: Place your Homepod mini with the cord sticking out the top…
This is a minimalist stand designed specifically for the Apple HomePod Mini. It raises the speaker slightly from the surface, giving it a stable base, and a subtle design touch that fits into any modern workspace or living room. Features…
Apple Home Pod Mini Wall Mount Bracket. There is a screw hole to mount to the wall, or you could use strong tape. The square box is sized so that you can coil the excess USB cable so that it is not hanging loose below the home pod.…
Context After searching for a good HomePod Mini wall mount, I always encountered the same issues. either no cable management, or hanging below the socket, and most important with all the weight on the tiny Apple charger. Why yet another…
I made this mount so I could fix my HomePods to my Ikea Fjällbo under my television and have a better stereo setup. The stand is fixed with 4 M3 screws. The spacing of the screws is adapted for my Fjällbo (but yours shouldn't be too…
I did it in two pieces so I didn't need to deal with internal supports. Lid has snap fit joints to securely attach to base. Printed on MK4 with Input Shaper - .4nozzle, .2layer height and rock marble polyterra PLA. Great original design…
This is a very simple and easy to print model of base plate or mounting for Apple HomePod. HomePod is fitting perfectly into a recess. Can be placed normally (vertically pointing up) or tilted on the side to expose touch panel more to the…
Having all that extra USB cable on the countertop was just not acceptable. I saw other bases for the HomePod Mini but none did anything to hideaway the extra cable. Here is a model made to allow the HomePod cable to be the right length.
A friend, who calls him “LX”, has an original HomePod and I tried to remix a stand for him as a little present. It didn't work perfectly, but it is usable.
Printed using an Ender 3 V3 SE using 30% infill and 5 layer walls. Snaps tight around a 35mm pole and securely holds the HomePod Mini below your monitor or TV.
I recommend double sided adhesive tape or something similar that it doesn’t slide down that easily Resolution: 0.32 mm Infil: 10% Supports: Recommended Filament: Geeetech Wood PLA
A simple wall mount shelf for holding your HomePod Mini(s). Printing Instructions Print in your preferred material with as much infill as you like, but here are some print settings recommendations: Print on its back and supports won't be…
a simple HomePod mini holder with big surface for double sided tape
Simple HomePod mini shelf for Ikea Nordli. Print 45 degrees to prevent support.
I created this wall shelf for the Original HomePod, e.g. version 1, so that I could have it in the correct height for better sound in the living room when connected to the TV. The design was made to not disturb the sound from the speakers…
Australian powerpoint mount for the Homepod Mini. Has a hole on the back to add a support stick if needed.
Homepod Mini holder to put on your desk. shelf or wherwever you like.
This is a wall mount for the HomePod mini. You can screw it on the wall or glue it with Tesa Powerstrips. Printed in PLA+, 0.20 mm, 15% infill with adaptive cubic infill, no supports.
This design is printed in two pieces. Wall mounting: 2 wall plugs 6 mm + screws.
Apple HomePod Mini support ring. Printed in Silver PLA, with supports. P. S. Don’t for get the ❤️ pls… 😊
Mountable HomePod Mini stand with c-clamp for mounting on a shelf, desk or table. I mounted two of those on either side of my desk. Less clutter and raised a bit above the desk. You'll need a M4 or a 4 x 12(at least) mm woodscrew to mount…
Wall mount for HomePod Mini with hidden cable storage. This 3D printable design keeps your speaker securely mounted while maintaining a clean, minimal setup. Perfect for saving desk space and organizing cables. Also works great as a…
We have a small empty space next to our kitchen cabinet which is covert with a front plate. To get the HomePod mini out of the way, I tinkered around to use the empty space and its features as a mounting point. The model is splitted in…
Optimize speaker placement, cable management, and organization by placing these prints around.
A simple and easy to print model to give your Homepod Mini the look of a pumpkin. I didn't need any supports, however i did print it with a brim.
❗ WARNING ❗: I made this mount in a way that it will grip the rubber base of a HomepodMini. When I was trying to remove my homepod from it for the first time, I though that I will ripp the rubber base off :D but I managed to disconect it…
A Low poly aesthetic Wall Mount for apple HomePod mini speaks
I merged parts of these two projects to create this. Skadis HomePod Mini Holder Peg for Shelf It has a negative volume. Use PrusaSlicer 2.4 or greater.
2 Color simplified TIE Fighter model for HomePod mini I used black and gray PLA. For easier printing, the wings and body are divided into two parts that need to be assembled after printing. Thank you for your likes, comments, and follows :)
A simple remix, because the plug of my homepod was a little too big for the original adapter to use it with the lovely "Wall Mount Plug" . Print Settings Printer Brand: Anycubic Printer: Vyper Rafts: No Supports: No Resolution: 0.20…
Mount your HomePod Mini directly to a wall outlet with clean cable management and no bulky shelves. This design attaches to a standard US duplex outlet plate and hides excess cable inside for a minimal, clutter-free setup. 🔧 Features: •…
Fits the popular fence type Double bar fence/"Doppelstabmattenzaun".
HOLLOW IS BEST. Printed with 20% infill, concentric pattern recommended for fastest print. Printed with PLA.
Housing for a teensy 2.0 with D-Sub15 connector. Can be used to connect e.g. a Microsoft Force Feedback Sidewinder Joystick via USB. Category: Electronics
If you need to place a HomePod Mini on a shelf and hide the cable you need to create a 10 mm hole for the USB-C cable bu
