Liczymy pasujące modele…
If you've been in the foam blasting hobby for any length of time, you've probably heard of the Fidlock holster system. It's pretty great - put a couple magnets on whatever, and now you can securely hold that whatever onto your body. If…
It's like Midlock, only it's a lot thinner and uses way fewer heatsets and bolts. Now instead of 6 screws holding the front plate to any of the 12 heatsets in the thigh plate, with pulling all 6 required to adjust the angle, there are 36…
Quick mount plate for the Nightinagle to allow the use of the Midlock system. Update - Slightly tweaked second version to allow use of m5 nuts if required. Two versions, one slightly thicker than the other.
Quick mount plate for the Worker Nightinagle 2.0 to allow the use of the Midlock system .
Want to reload your Breacher like John Wick? This SillyShell Caddie can hold 2 or 4 shells on anywhere you want. Using Chance's Midlock system Hardware: 2 or 4 x M3 Heat Set Inserts (I used M3*5.5*5 ) 2 or 4 x M3*10-12 Print Orientation:…
Highly recommended that you print this in PETG or another semi-flexible filament, as the clamps have to flex a little to grab and release darts/shells. PLA will work but its longevity may be affected. Replaces the FrontPanel and…
This is a mounting plate for Fidlock or Midlock studs designed for the Protean blaster. It comes in both Right and Left handed versions and it also features a spacer specifically designed to be used with the Solenoid pusher group of the…
Designed to be extra low profile, and be even more secure due to the double-wide mount. Unfortunately not adjustable needed HW: one ~4,5mm diameter ballpoint pen spring two M2 self-tapping screws (can be scavenged from nerf blasters) a…
This is a Dropleg rear plate for the Midlock Platform, it's designed for 30 mm wide straps and I've used this Snap Buckle to complete the harness. Print settings It can simply be printed with the flat face on the printbed, it's highly…
requires two screws and stuff to mount it to your bladetech or whatever mount of your choice completely removes need for heatsets or any of those pesky back parts I use these https://blade-tech.com/products/molle-lok
These are modified Grip cores and Spring cups of the Wildstyle that integrate M5 threaded holes that make them compatible with both Midlock and Fidlock holsters. They come in both left handed ( LH ) and right handed ( RH ) versions. Print…
This is my take on a midlock mounting solution for the Adventure Force Aeon Pro X; not blaster disassembly or modification is required! All you need to do is unscrew 2 screws on the side picatinny rails and then bolt this in its place.…
Overview This is a bracket to secure the midlock attachment knobs designed by Chance to an Xshot Thrasher. It uses 4x m3 heat set inserts (5mm x 6mm) and 4x m3 screws. I'm using m3 screws because it's what I had on hand and they work with…
Uses KK0708's Cricket Pro holster geometry (i.e., through the hole) to mount to the Midlock system. It has a bit sticking out that fits in the diamond-shaped gap between the trigger and the hole to prevent the blaster from flopping around…
Modified Voidrunner receivers with Midlock or medium Fidlock (60mm spacing) mounts on either one or both sides. For some reason, the hinge for the battery cap was different in the .step file, so I uploaded it here. Needs two M5x12 screws…
Use this instead of the normal Left panel (or mirror to use it on the right). I'm using M5x10 bolts but could fit longer.
Remix of the non-angled magnetic holster mount for the Gecko to work with Midlock/medium Fidlock
I recently decided to try using two (or more) Super Drum 70 magazines with my nerf loadout, but if I am using more than one, I need a place to stow them. The Mantis holster seemed like a good option, but I needed a lug for it. I didn't…
Designed to be extra low profile, and be even more secure due to the double-wide mount. Unfortunately not adjustable needed HW: one ~4,5mm diameter ballpoint pen spring two M2 self-tapping screws (can be scavenged from nerf blasters) a…
Remix of the non-angled magnetic holster mount for the Gecko to work with Midlock/medium Fidlock
This is a modified version of the Thigh and Front Plate for the Midlock platform with the goal to make them compatible with M3 heat inserts with smaller outer diameter. Other than that the pieces are exactly the same, so print settings…
This is a plate I designed to be used with midlock or fidlock to make a super awesome holster. I designed it to be able to be drawn with one hand (you should be able to reach the release the your thumb) which makes it super practical in…
Edited this so that you dont have to get m3 heatsets but you can instead use 5 m3 nuts. they are about .22 from flat to flat. youll have to use slightly longer screws for each position because the threads on the nuts dont go as far as the…
I've since updated this project to one that uses less parts in general. Take a look if you'd like! https://www.printables.com/model/1363459 This is a remix of the belt plate from midlock 2. The side loops have a 1" slot in them for nylon…
The Midlock system is great, but objects end up sitting quite far away from your body. This reduces by 8mm by removing the ‘thigh’ component and angle adjustment functionality. I wouldn't want to bring it any closer to the body as it…
I stretched the midlock part so i could use it with the mounting points for the DZ Outlaw by Skwiggums ( https://www.printables.com/model/705841 ). It works the same as the original but kinda just hangs down a bit further. Use with all…
I realized after posting 1.0 that i could make it thinner by modifying the “thigh” plate form the original. this gave me more area to work with so now all loops are 25mm (1in) for standard straps. only hardware needed is one 3mm nut and…
Converts Midlock2 to Spindle Hub mount. Uses a single m4x10 screw to secure to the Hub. Terms and Conditions: By downloading these files, you agree to the terms that you are not Frontline Foam, you are in no way affiliated with Frontline…
I've created a split pusher cover for post 1.3 Gryphons to allow the use of Midlock mount points while keeping the pieces easy to print in the “best” orientation.
The Midlock holster system is a great way to attach your blasters to your gear on a budget, but I found the included mounting plate to be quite wobbly when mounted to my vest. I modified these mounting plates to attach to the PALS/MOLLE…
A Picatinny rail compatible mount for Chance's midlock. Uses two (2) 10-32 countersunk or button head ¾ in bolts and nuts for the knobs (should work with M5 hardware as well. as well as two (2) m3x30 bolts + nuts for the pic mount. Needs…
