7731 modeli
Thanks to feedback from a user of my very popular miniature vice with table clamp, I realized that access to the the hand knob on the vice was a bit hindered by a part of the table clamp. If you don't have the vice yet, get it here:…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Paint holder for mini paints for the Skadis / Skådis system, three versions that fit either vallejo (or others of the same size), citadel or pro acryl. The dropper bottles (vallejo and pro acryl) fit either standing normally, or upside…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
Badminton racquet, 8 cm long. Tear off the support.
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Miniature Giants Causeway desk model. Print the base in green for grass or blue for sea. Recommended slicer settings Base: In your slicer rotate it to print upright on the long side nearest to rocks, see picture. This will give you the…
These trays fits your 24mm and 40mm base minis (my models are warhammer 40k models but there are probably other brands that has the same base diameters). Some of my miniatures are not suitable for storing in foam so I made these trays…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
you asked about a bigger version for lager miniatures - you get a lager version! This version of my miniature transport box has double the size of the standard ones and is designed to carry bigger miniatures. You can take out the divider…
A model of a Kenku (Humanoid Crow) Artificer/Fighter/Paladin for Dungeons and Dragons or similar TTRPGs. The pictures show the version I painted myself with added moss for foliage. I included a gcode and an STL file. If you'd like to…
The final word in squad organization and identification. Description Included: A 1-color variant dial cover A 2-color variant dial cover 2 target lock tokens (open) 2 target lock tokens (filled) 1 small base ship identification ring with…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
History of the miniature vice This is the completely reworked version 2.0 of my very popular miniature vise, which is much easier to assemble now. Around Christmas 2020, I had published the first version of my miniature vise here:…
A 1:12 and 1:48 scale Helldiver miniature! This model is 1 of 20 poses available in the full set of miniatures currently available on the Galactic Armory Patreon until June 1st 2024: https://patreon.com/galacticarmory The full set is also…
Find 9 other poses when you support me on Patreon: https://patreon.com/galacticarmory
Inspired by Sneaks awesome vise model I designed this miniature holder for painting. This mechanical concept makes so easy to attach and release miniatures with different base diameter or shape (square, oval…) although is best for round…
My fully working and tough miniature vise is still highly popular. That has motivated me to further improve the table clamp for the vice even more. It is now 100% printable, no metal parts are required any more. If you don't have the…
Labubu Mini - This model is shrunken down to 2/3rds of the original size. Plus I added the option for a keychain. The body can be printed without any supports. I did add a brim to make sure it doesn't tip while printing. Options include…
Thanks for all the valuable feedback that I got on my miniature vice: https://www.prusaprinters.org/prints/53471 This feedback has helped me to improve the design more and more, with additional upgrades and modifications that make it…
I've created these furniture pieces for use in architectural models, dioramas, and more. They're designed at a 1:100 scale but can be easily scaled from your 3D slicing software as follows: For a 1:50 scale, use at 200%. For a 1:75 scale,…
A range of circular, oval and rounded rectangle bases sized equal to those produced by Games Workshop.
The minis These are small combat vehicles (mainly tanks) that are designed to be printed on a FDM machine. These models were made to be printed easily on cheap machines with a .4 nozzles. All models were tested on a cheap 2yr-old and…
Cute Cat Miniatures Set is a collection of five small decorative cat figurines designed for 3D printing. The set includes five different cat poses and styles: Peekaboo Cat in a Basket – a cute cat hiding inside a small box or basket. Loaf…
A 1:12 and 1:48 scale Stormtrooper miniature! This miniature is part of a set of 20 available for purchase on my website or on my Patreon until February 2025. The full version includes separated bases, pre-supports for resin printing, and…
Farm animal that stands on its own. Scalable. Tree supports required. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Bring your projects to life with this super collection of miniature people. The set includes a wide variety of human figures in different poses — walking, sitting, standing, interacting — ideal for architectural models, tabletop games,…
Intro I couldn't find a suitable hand vise/clamp for painting D&D/DnD miniatures and other resin prints so I designed this one from scratch. It works very well, especially for terrain and odd-sized prints, plus it's a great PCB clamp for…
Also my second version of the miniature vice became very popular right after it's release. If you don't have it yet, here are the files for the vice itself: https://www.prusaprinters.org/prints/53471 Update 23.01.22: New fully printed…
A little balloon dog, rabbit, and giraffe for you to print! These print-in-place animals are the perfect decoration for your room, or anywhere in your house. Or, you can just print some for fun! Auto supports on dog and rabbit* paint on…
Easy removal of supports, pay attention to the foot area. Frog samurai miniature with high details
They may have taken down the Trump/Epstein Best Friends Forever statue, but now you can celebrate Friendship Month at home and make your own. Larger version of the statue STL available to download here:…
3D Files for a 1:12 and 1:48 scale version of a B2 Battle Droid! This is 1 pose of a 12 pose set. If you like my work and wish to support me or get other poses, check out my Patreon here: https://patreon.com/galacticarmory
3D Files for a 1:12 and 1:48 scale version of a Republic Commando! This is 1 pose of a 10 pose set. If you like my work and wish to support me or get other poses, check out my Patreon here: https://patreon.com/galacticarmory
Update 10-1-2024: Added “offset” tiers, to stagger the location of bottles (as suggested by @Xellixor on Thingiverse). New version 3 with screw-based, more robust locking mechanism is now available on the Prusa Store . Version 2 is and…
A dwarf miniature for your boardgame. Print instructions Not easy super easy to print.
Updated 05/18/2022 Added new 79x1 (in three fits) to support season 2 minatures Added new labels for Season 2 Updated Instructions for Season 2 Updated 03/28/2022 Added new medium fit files (see “Optimizing Fit” section below) Updated…
This miniature vice with remarkable strength and modular mounting system is made for those of us, that want to do a little hobbyist work on our clean desks. It does not have any sharp edges, so the risk to scratch furniture is minimal.…
Hi, after looking through the available miniature painting handles I decided to design my own. I tried to make it as minimalistic and with as few parts as possible yet still providing a firm grip on the miniature base. The internal thread…
Model Crates are great! They're even better if they're miniature, collapsible and stackable! This is a simple print that goes together without any hardware and can hold all of your little bits and pieces on your desk or workbench. Build…
Supports required for the bushes and roof. Great detail and easy to remove supports. "Tree supports on build plate only" Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
These are various holders for miniature / acrylic paints. 25mm (Vallejo, Army Painter, …) 33mm (Citadel / Games Workshop) If the need comes up for myself, I will add other sizes as well in the future. If you want to change them yourself,…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Clodsire, Tabletop DnD miniature 50 mm Large base which can be used for DnD and other Tabletops.
Various pieces of furniture to be used in/with your D&D scenes, figurine toys, dioramas etc. There are various files including: box of supplies, barrels, bookshelves, tables, and chairs Pay attention to scale when you slice these files,…
Ich habe dieses Miniaturmodel der Toniebox für unseren Weihnachtswichtel erstellt. Sie finden aber auch sicher in jedem Puppenhaus platz. Das Model liegt in zwei Versionen vor: Einteilig für die Option es mehrfarbig zu drucken oder…
If you scale down you will lose the handrails but it still looks good. Tree supports on build plate only. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Project video: If you are an engineer, chances are you have a 3d-printer and are aware of injection molding machines, maybe even directly or indirectly working with them. So why not combine these two things? What you get , is a miniature…
Straight from the darkest dimensions, this model captures the horrifying appearance of the iconic Demogorgon. The figure stands in a disturbing, slightly hunched pose, its long, slender limbs and fingers outstretched in a gesture of…
A 1:12 and 1:48 scale Rookie ODST miniature! This miniature is part of a set of 12 available for purchase on my website or on my Patreon until August 2024. The full version includes swappable heads, pre-supports for resin printing, and 11…
The base is fully configurable in the provided FreeCAD-file. Simply change the values in the Parameters-spreadsheet. 25x25, 30x30, 50x25 and 50x30 mm exported bases are provided as examples.
Unofficial replacement promo miniatures for Star Wars: Battle of Hoth by Days of Wonder. The base game comes with cardboard tokens for the ion cannon and shield generator terrain pieces. A set of promo minis were available for a limited…
3D Print Files for a miniature Arbiter! Supplied in 1:12 scale for FDM printing and 1:48 scale for SLA printing.
A fun horror twist on the classic “see no evil, hear no evil, speak no evil” trio. These miniatures reimagine the iconic Ghostface mask in three different expressive poses: hands covering ears, hands covering mouth, and hands covering…
A painting handle for 15-25mm based models. The clips that grip the mini bases are narrow for good painting access to the underside of models. However topples over easily being so narrow, consider looking at the remix Printed at 0.2…
A support-free simple yet cool looking miniature riser for DnD, warhammer, flying creatures or just for displaying minis Features Printable without supports Beautiful chain texture Sizes for different common miniature base diameters (let…
Prints with minimal tree supports for DND terrain. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
My new favorite design. Update to my previous painting handle but kept the bolt hole for backwards compatibility with version 2. This one doesn't require a bolt as the clip has the 3d printed thread to screw into the handle. As before the…
awesome Owlbear miniature The base features holes for magnets
This holder (with the diameter of the base is 40mm) is used to attach the figure when painting.
Has this ever happened to you? You've just arrived at the big business building. You're there for a job interview with the president of big business, and you're hoping to make a good impression. You've done your research, and you know…
Bring arcane power to your tabletop adventures with this detailed wizard miniature, perfect for Dungeons & Dragons, Pathfinder, or any fantasy role-playing game. The model depicts a wise wizard mid-incantation, holding an ancient tome in…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
A couple of DnD minis I made. There are: -Male & Female variant of orc barbarians -Male & Female heavy armor knight (Not the highest quality Ive made, but I was asked to include them) A female elf archer A male fire sorcerer/mage
Supports required for the roof. Great detail and easy to remove supports. "Tree supports on build plate only" Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Yes, the model is meant to be partially sunk into the print bed. I designed it this way to reduce the number of required supports. Without further ado, here is Version 2 of my earlier sleeping dragon high detail miniature book dnd,…
Bring unwavering divine might to your tabletop with this highly detailed paladin miniature. T his model features a fully armored holy warrior poised for battle. The paladin stands confidently on a textured base, clad in ornate plate armor…
After 2 years of Warhammer 40k miniature painting and a few iterations I present the Magnetic Miniature Handling System, short M2HS. The goal of the M2HS is simplified handling of miniatures, subassemblies and finished minis too avoid…
Update 12/07/25: I just released a follow up table : https://www.printables.com/model/1353120-3d-printed-mini-pinball-v2 Firstly I admit, this is far from perfect. Consider it the begining of a journey that's been fraught with dumb…
Lego inspired mini figure
🧩 Hexagonal Wall Display Pack – Automotive Collection Edition Transform your miniature collection into a true automotive gallery with this exclusive modular hexagonal display pack ! Designed for collectors who appreciate both design and…
Nozzle contamination can be seen on the back.
A miniature model of a sewing machine with a drawer which can hold needles. I recommend printing the BASE part so that the right side, the side where the turning nob is, touches the build plate (I already exported lit ike this), this way…
Unleash the terror of Jabba's palace with this highly detailed 1:24 and 1:48 scale Rancor 3D Print Files. Crafted with meticulous attention to detail, this fearsome creature from the Star Wars universe will tower over your miniature…
These miniature bases are compatible with Warhammer 40k, Age of Sigmar, Battle Tech and many other table top games. Available WITH and WITHOUT hexagonal holes for the miniature pins. We recommend to print upside down on a textured plate…
A miniature swivel office chair. NO real adjustment functions. The seat should be rotatable if assembled correctly. Wheels (casters) are supposed to be spinnable too but tiny printing issues could obstruct that. Default size (assembled)…
4 miniature buildings that can have copper string lights fit inside to give a tea light glow. All designed to be printed without supports, these were printed with a 0.3mm layer height
print it upside down. .2mm layers. textured PEI looks best imo
2 versions- the raw model and one with a round base (Pictured) take your pick. Hostile monster for dnd adventures. Supports required: Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles Kirby inspired, Kirby, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.
Miniature Bookshelf I created to be used as a bookend or filler on a bookshelf. Can also be used to put collectables on, or miniature books could be added. I printed this at 0.15mm on my Prusa I3 Mk2.5S, with the back of the bookshelf on…
Finally modeled a dragon :) I'm not quite satisfied with the wings, they feel too bulky / inflated, and smooth. Might revisit it in the future.
Tiny Tank – Tiger i 1:200 scale model Easy to assemble – the turret clicks onto the hull and can rotate. Just glue the tracks and back part to the main body. To scale a model from 1:200 to 1:144, you need to use a scaling factor of 138.8%…
Since I published this miniature vice with the optional table clamp, it has become very popular. And I have started to use it myself for numerous hobby activities. If you don't have it yet, feel free to get the latest version here:…
Follow us on instagram : https://www.instagram.com/papaprints3d/ More models on our website : https://papa-prints.com/ The Papa-prints BBQ is the most unique toy barbecue model: large cooking space with removable grill, 3 control knobs,…
Attached is 25, 32, 40, 50 and 60 mm blank miniature bases. Also attached is the SCAD file if you want to modify. Want another dimension? Alter the width value of the OpenSCAD file and make your own. Printed at 0.3mm for speed. Round…
Meet this adorable little T-Rex! 🦖 Designed to be cute, fun, and easy to print. The sitting pose makes it perfect as a desk buddy, shelf decoration, or even a gift for dino lovers of all ages. This charming dino was created from scratch…
These are digital 3D printable models of Miniature Food from across the globe from our magic compass . This pack is part of our All-knowing Magic Compass which you can find on our website:…
This is my character from my DnD game. He is the avatar of Thor to walk among the humans. I hope you like it and have some awesome adventures with him.
Miniature Painting Handle capable of holding bottlecaps and wine corks to assist in painting miniatures. Category: Toy & Game Accessories
Three variants for undead miniatures. The two skeletons should require little to no supports, while the lich will require supports.
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Plants vs Zombies inspired, Peashooter, Tabletop DnD miniature 25 mm medium base which can be used for DnD and…
*NEW version Here Useful link: Klipper Configuration- TicTac_BLTouch_Basic.cfg A smaller version of the awesome Ratrig V-Minion, with a build volume of 120mm3, Belted Z and Drag-chains on all Axis. Printed parts arranged in the correct…
D&D roll playing figure
Detailed miniature Grinch Christmas village scene . It's the perfect festive print for decorating your tree, gifting, or adding a touch of winter magic to your home.
I was trying to accessorize a library-themed book nook ( https://cults3d.com/en/3d-model/art/una-pequena-libreria-para-decorar-tu-libreria ) with a stack of books. I found this design of a book on Tinkercad and remixed it. I've included…
A boney baby dragon that is surprisingly cute. Supports needed. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
I included two variants, hollow and solid - if you want the top to have some texture and you have a textured heatbed, print the model upside down and it will look nice - solid is there so if you wanna print it rightside up then you can…
A request was made on r/kitcards and I decided to try to fulfill it. IT was a fun project that involved a lot of experimentation around the action of the blade. The blade on this model can be moved either by using your hand or by affixing…
One of the first models I made was a crappy and simple model of a spoiler with dual wings (I'm not sure of the right terminology). I have revised it and made a far better version, including a better mounting system and a slight curve.…
I created these Star Wars Minis to hold a piece of 1.75mm filament. Heat & cool filament to make straight sticks. Collection HERE: https://www.printables.com/@TripleGWorkshop/collections/2171907 Tree Supports on build plate only Partially…
I've been looking for some nice looking stand for my minis and I've found one designed for ThomPerry63. It was designed for resin printing, and since I'm using mainly PLA I've tuned it to use it. Changes: filled the bottom, so you dont…
Here is a collection of miniatures from the Acquisitions Incorporated DnD game! Based on the characters located here: http://www.acq-inc.com/ Want to access even more models not found here in Prusa Printers? Interested in supporting my…
A very small pc with internal components. The .STEP file is included if you want to create your own components for it. Print with resin for best results. The side panel is optional and can be printed with clear resin You can get a…
Supports required for the roof. Great detail and easy to remove supports. "Tree supports on build plate only" Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Perfect for any graveyard, tomb, crypt, dungeon, swamp, church, spooky glen, backyard, etc. Some have optional supports. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
![Blank 32mm miniature base [Solid and hollow]](https://media.printables.com/media/prints/1131093/images/8534553_9f89b494-fd4b-4aa8-bbcd-335ae4053dae_94f88f29-f1a7-43f6-9169-45886fa741ba/32.png)
