Wyniki wyszukiwania: minus

My actual penis dick wiener and foreskin. (minus one inch as to not offend)

Godzilla Minus One - Posed (Very High Resolution)

This is a pre-posed model of Godzilla Minus One. Scale the model to your device. The model is available as a rigged model so that you can post the model and the move to print the model. I posed Godzilla to my liking and printed and then…

Godzilla Minus One

This is a high detailed version of the monster from Godzilla minus one. I hadn't seen one so I just made a profile using a model available online. I suggest a decently high infill, I use 40% because otherwise the claws come off with the…

indominus rex

the indominus rex is the main villain from jurassic world and it is a hybrid

Dominus - Rocket League

Dominus from Rocket League. I filled in the original model using 3D Builder to make it solid and much more printer-friendly. I also included the Stern wheels that will snap in to the axles, or you can use any of the other wheels on my…

One Piece TCG Power and Cost Add and Minus Counters

If you have bed adhesion problems with the centers of the zeros, in the slicer find where the first layer on the back of the zeroes is printed and set the number of slow layers to that layer plus five. For those still having issues with…

SOVOL SV08 Silicone Nozzle Cleaner & Purge Bucket Minus Load Cell brass brush option

…Please be sure to hit like & post a make, I'd love to see your prints! MACROS AVAILABLE HERE…! https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified/ EDIT: ADDED SILICONE MOUDLE for use with silicone pads, including the one…

Roblox Dominus Empyreus

The Roblox Dominus Empyreus that everyone wants! Category: Toys & Games

Root Insert / Organizer - All Expansions Through Homeland (Minus Clockwork)

This is an insert / organizer for Root. It supports all expansions released through Homeland (minus the Clockwork expansions), plus the deluxe clearing and deluxe frog clearing markers (see the detailed list below under “Which Content…

Cube minus Cubes

This is a cuboid standing on edge, with a series of shrinking cubes being subtracted on each face. Built in openSCAD. Nothing special, just something I wanted to try … Print Settings Printer: TronXY X5S Rafts: No Supports: No Resolution:…

Plus Plus (Minus Minus)

This building block is Plus Plus compatible but has a few differences. I'm excited to see what you can make with them!

Minus One Godzilla

Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤

Gardena Sileno Life and City Bumper Remix - Minus 8.3mm height

Remix of KenthJ's "Gardena Sileno Life and City Bumper" with 8.3mm more ground clearance.

Deadly Dark Dominus

A rare accessory on Roblox from SDCC2019.

Hueforge - Godzilla Minus One Movie Poster (160X241)

1st test print with these settings, I think you can get away from the Agua Blue, didn't really add too much to the print. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Azure…

MTG plus/minus counters

These are tokens/counters for tracking +1/+1 and -1/-1 conditions. The design is customizable in case you need other values for some reason, but these are the most common. I use filament changes to make sure the top layer has the text in…

ABECEDARIO en minusculas

ABECEDARIO en minusculas alfabeto letras

Hueforge - Godzilla Minus One without Text Poster

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Steel Grey Transmission Distance: 1 PLA PolyTerra Fossil Grey Transmission…

Dynamic Yo-Yo! ALL PIECES (minus string) INCLUDED

I created a Yo-Yo that is a step above the cheap ones you may find for only a couple of dollars. This Yo-Yo is designed with quality in mind, and similar to the professional-grade Yo-Yos that were incredibly popular in the 90s. Unlike…

MTG Minus Tokens

Minus tokens for MTG 17/12/24 UPDATE: Updated the design with smaller variety.

Chibi Pinky & The Brain (Minus & Cortex)

A new 3D figurine generated by AI, a Chibi Pinky & The Brain (Minus & Cortex). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the…

Minus Cube 3D puzzle / Минус-кубик

A retro soviet puzzle game reinterpreted for 3D printing. The goal of the puzzle is to shuffle the cubes in such a way that on each side of the box, all of the four (4) visible faces of the small cubes have the same color. Small cubes can…

FLP-10 Terminus- Double Barrel Pump Action Foam Blaster

Update 8/26/26: Tighter magwells and shroud for better prime detent. This is Terminus. It's got two barrels, two plunger tubes, two triggers, and uses two magazines. Terminus is the absolute best springer for under 250, if you don't mind…

Dominus Praefectus

roblox

Simplified Dominus Rocket League

I've basically just filled all the internal holes (there were many), Removed all the details in the bottom, made the axles thicker and simpler, should be much easier and faster to print. It's not perfect though, I am new to 3DP. :) It's…

Dominus Venari

Dominus Venari from Roblox, a Ready Player One prize that could only be earned once by one person.

Magic The Gathering plus / minus counters

Simple counters with plus and minus. Can be used as poison counters, to modify creature power and toughness (they have two values with slash between) etc. Design enables stacking them up, and chamfer on top helps to count them when…

Minus1dimension-inator : A plotter attachement for bambulab X1

WARNING since last update X1 will heat up if there is a M3 command at the start of the G-code Who never thought: what if my 3D printer was a 2D printer ? All you need is a M6*40 bolt and a nut to go with it, simply put the nut in the…

MTG minus counters

Print settings 2 walls 0.2 mm layer height 5 top layers 3 bottom layers enable ironing 1% grid infill (0 also works but the number on the top might not be filled out properly)

Dragon Burner V8 with hex pattern minus outline.

Remove the accent outline on the face of the Dragonburner. In orca/Pursa Slicer use the split button to split the model!

Benchy Santa Maria: Columbus’ Caravel (minus the scurvy)

Behold the Santa Maria Benchy Edition™ —not to be confused with the actual ship that sailed the ocean blue in 1492, got lost, and accidentally invented layovers. This one’s printed in pristine white PLA and ready to be painted into a…

Basic Stat Minus - Marvel Champions

Exactly the same as DrFeelGood's basic stat tokens, but negative. When I printed them, I printed the body section in white (instead of colour) and the outline in the respective colour (instead of white) just to give it some visual…

Dune Sea Train Droid Head, Neck, and body. Minus a few details.

Work in progress. Stage one of Droid Build in Blender. Got sidetracked (real shiny objects) with materials and nodes. Body will be coming soon. The head is pretty much done. cut off the neck flat. put some holes in the top and make it a…

Terminus - Trays for the original insert/organizer

Better setup and gameplay for the boardgame Terminus. The trays can be used with the original insert. I own the deluxe components and used the spacer tray to store the cardboard money tokens.

Dice plus minus + -

I created this dice for my niece. She invented a game for primary school. Dice with 3 times “+” and 3 times “-” on opposite sides. Dimensions ~16 mm 15-20 % infill should be enough

Custom Dominus rocket league model

Custom Dominus rocket league model this will work 100% with On shape and other platform make sure to give this a thumbs un and a five star rating

Eibos Cyclopes Drier Fan Converter (minus a couple overhangs)

Two places were giving me trouble printing cleanly in PolyMax PC. The rounded overhangs near the heater screw holes. I suppose I could have just printed with supports, but I opted instead to extend the problematic overhangs down to the…

Minus Pol Block Solar PV Akku LiPoFe M6 Busbar

Die sonst schon vorhanden Modelle im Netz erlauben es nicht das ankommende Kabel in die gleiche Richtung auszurichten wie das abgehende Kabel

Plus/Minus Counters

A couple of little counters for counting plus and minus 1 to 10. Uses 4x2mm magnets to hold each one together. Update: Reversed the grooves in the middle section to simplify printing.

Reversible Plus/Minus Tokens

A simple counter/token that shows plus one, two or three on one side and minus one, two or three on the other side. Useful for various card, board and tabletop games which use these types of tokens. Designed to be color-changed at 0.8mm…

Lower A-arm for Helion Dominus 10tr

I made my own Lower a arm after breaking a ton of other designs.

garra de indominus rex

la garra de la foto es la que hice

Dominus from Rocket League Car Model

💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Detailed 3D model inspired by the Dominus from Rocket…

MTG TCG Plus Minus Counter

A small +/- counter for cards. The parts should fit together easily, end caps should press-fit. You will need a well tuned printer for the parts to work correctly. In case the fit is too loose/tight scale the axle up/down 1-2% in X/Y.

Alphabet minuscule cursive / Cursive tiny alphabet

La police utilisée est Marelle The police used is Marelle

Paladins - Terminus

This is a model of the paladins character Terminus with his weapon in his abominable skin. Be aware that when I printed this, some of the supports were printed mid-air, so be careful about that. The 2 files below include the print file…

Plus and Minus keycaps

A set of keycaps with a plus and a minus symbol ontop. Remix of 3DLada's keycaps.

MTG Plus and Minus counter

you can print this at your base settings easily but you will need a number of 8x2mm magnets equal to 2 times the number of wheels you print as that is how these connect to eachother

Plus Minus Input (Easy Home Cockpit Project)

Don't forget to like and comment. Material: 2x press switches (hole diameter is 16mm) When combined with one another models of this collection mimic the functionalities of the instrument panels found in most aircraft (helicopter, fighter…

Terminus Board Game Insert

Insert boxes and organizer for Terminus by Inside Up games retail edition. Print 5 of the player boxes. Make sure you kept your punch boards in the bottom for a snug fit. Tips:…

Maximinus Thrax Bridgelayer (lost STC) - WH40k

M-Thrax bridge-laying support vehicle based on the Chimera hull. Blue flat bridge is meant to be made of cardboard or plastic. The Maximus Thrax bridgelayer named after an Emperor of Old Terra, was designed to lay a combat bridge while…

Extruder Add/Minus

Clockwise = add plastic, Counterclockwise = less plastic

remotojoy-minus dock

This is a dock for remotojoy-minus. The following parts are required for assembly. KCD11 Rocker Switch ( https://aliexpress.com/item/4000973563250.html ) USB Type-C Connector ( https://aliexpress.com/item/1005006297697300.html ) JST PH2.0…

Dominus - Rocket League Cars

A model of the Dominus from Rocket League. The perfect miniature display figure for any Rocket League Fan! Print Settings Supports ON Infill? Your choice depending on intended strength Attribution Mention Made with the assistance of…

Croc minus base

Croc minus base.

WiiU Plus Minus Buttons

Simple keyed buttons with no markings. Designed to fit the wiiu plus and minus buttons. Tested good :) OpenSCAD file is included, so you can change the size and keying to fit other button needs. The .3mf file has variable layer height to…

E3D Revo Holder for Indominus

Nozzle Holder for E3D Revo Nozzle for my Indominus 3D Printer from Makergal 13/08/2023: Added teardrops to holes for better tolerances.

LYBELL MINUS 2.5

le " lybell MINUS " mise a jour tpu dji04 septembre 2026 ! NEWS frame v3 : plus longue de 3mm et entraxe des entretoise arrière plus large de 1mm .... le placement du condo est plus facile ! les tpu de la version v3 sont modéliser pour…

Quickstring - Terminus

Follow the guide for the original QuickString, just.. y'know, twice. You'll also need the insert and tip files from that set. This is just the dual-body.

Torus minus toruses

Torus minus 16 toruses

Icosahedron minus ball

Ball subtracted from icosahedron with smooth edges

Torus minus toruses 1

Torus minus 16 toruses

Fantominus Corsair CATSWAP

AIO Waterpump CATSWAP with Gatsly

East: Concordant and South: Terminus Game Boxes

I know John hand-makes the boxes for these games so I feel bad. I just prefer the more snug deck box that was in the North and the West Kickstarters. I love the idea of the compass series but the boxes just were taking too much shelf…

Plus and Minus keycaps

A set of keycaps with a plus and a minus symbol ontop. Remix of 3DLada's keycaps.

Benchy Santa Maria: Columbus’ Caravel (minus the scurvy)

Behold the Santa Maria Benchy Edition™ —not to be confused with the actual ship that sailed the ocean blue in 1492, got lost, and accidentally invented layovers. This one’s printed in pristine white PLA and ready to be painted into a…

Minus One Godzilla

Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤

Chibi Pinky & The Brain (Minus & Cortex)

A new 3D figurine generated by AI, a Chibi Pinky & The Brain (Minus & Cortex). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the…

MTG Minus Tokens

Minus tokens for MTG 17/12/24 UPDATE: Updated the design with smaller variety.

One Piece TCG Power and Cost Add and Minus Counters

If you have bed adhesion problems with the centers of the zeros, in the slicer find where the first layer on the back of the zeroes is printed and set the number of slow layers to that layer plus five. For those still having issues with…

ARYZ Minus | Pendant light E26/27

ARYZ Minus | Pendant light E26/27 The ARYZ Minus is the second born of the ARYZ collection and is, of course, based on the "minus - " symbol. Every evening, my children and I sit together over their arithmetic homework — adding,…

indominus rex

eh