Liczymy pasujące modele…
A projector for GoBo that can be mounted on any flash (preferably one with a Led pilot light, such as the Godox MS300V). This is a personal elaboration inspired by the work of Petri Damsten ( http://petridamsten.com/gobo-holder/ ) and…
The MS3 does not mount to the stock ECU mounts on an NB Miata (mine's a '99). Recommend printing with: ABS filament Fill density=30%+ Perimeters=3+ With supports These originated from Risi_turbo's MS2 mounts from…
SMC bracket for mounting [Netgear MS305/MS308 Multi-Gigabit 2.5 GbE switches into common Structured Media Cabinets. Supported devices include: Netgear MS305 5-port 2.5 GbE switch Netgear MS308 8-port 2.5 GbE switch This includes printed…
M5stack atomS3 and S3R enclosure. if you want less tight add 0,1 or 0,2 mm in size.
Parametrizable 10 inch and 19 inch rack mount for - FritzBox 6590 and 7590 - Netgear GS316 / MS316 and GS308 / MS308 Screw size is parametrizeable, example is with M4 10mm screw Source at Github https://github.com/bobosch/RouterRack
M5Stack AtomS3 Halter für eine 3,5 Senkkopfschraube ---- M5Stack AtomS3 holder for a 3.5 countersunk screw
This part enables you to use the MK3 fan shroud on a Prusa MK2 (Dolly). for use with: https://www.thingiverse.com/thing:2261050 Source: (Original part was the original by Prusa on GitHub, converted from openscad to STEP and then imported…
Lower mounting bracket to locate a MegaSquirt MS3 ECU in an 01-05 Miata (this may work on a 1999-2000 NB1 however I don't have one to test.) Two versions, one without a hole for a bolt of ziptie to secure the ECU (0105MiataMS3Mount.stl) ,…
Just a simple protective cap for the light bulb. It has an opening, so it does not offer full protection, but it prints nicely without any supports
I needed a way to mount for my ATOMS3R Camera in my Lack enclosure. I had a Logitech C310 and it worked great, but it was too bulky in the enclosure with the pocket doors mod. I recently came across the new M5Stack camera and picked one…
This Mount is Remixed for the new m5Stack Unit CamS3 to fit into the Sovol SV06 and SV06 Extrusion Seals. Printed parts needed: 1x camera_mount.stl 1x extrusion_attachment.stl 2x Pin.stl or 1x complete_set.stl Additional parts: 2x Lego…
Info This Adapter is made for the new m5Stack Unit CamS3. It fits any ov2640 module with a 120* viewing angle lens on it. Just pop open the original housing, and change the module as well as the adapter! Like what you see? Consider…
Hi, this is a commissioned model for my workmates from our electronics testing department. A nice case for their JTAG programmer pcb (OLIMEX TMS320-XDS100 v3+ JTAG Programmer). It is a two part case for use with 8x M3 inserts. The input…
The Snap-on TPMS3 docking station breaks down into two pieces for storage purposes. The rear support was lost for the one I have. I designed this simple part so now I can charge the unit. I would orientate the part to be printed as it…
Based on my euro modules , this version is designed to hold an M5Stack Atom S3, but could easily be adapted to work with the other Atom modules. I've included two models based on my two euro plate designs (one with two clips, one with a…
A remix of FRC3038's camera mount for better camera fit/hold and more istall options. This is a WIP (ver 2); Version 3 may have print-in nuts for the tilt axis to elliminate the need for the 3.5"+ tilt bolt
Rowsdower, Zap Rowsdower, License Plate Frame, MS3K R.I.P. Bruce J. Mitchell Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
Recomended 55% - 100% Infill For Best result !!! JMS3D Shop Phone Stand – Improved Version (170 mm) The redesigned 170 mm JMS3D Phone Stand delivers extra stability, better grip, and a sleek, modern look. Its upgraded dual‑channel base…
A friend of mine uses a M5Stack ATOMS3R to point his Arrow II antenna directly on satellites. With this adapter, the M5Stack can be used as a scope to point the antenna directly on satellites or fixed points in the sky.
Chassis Sleeve for an AKG DMS300 Microphone. (5094802-00) Sleeve has ring / indent on bottom that can be colored for mic identification. Print in your choice of materials - I printed it in ABS. Threads may require finer layer heights…
Stand for smart weather station Tesla MS360 Stojánek pro meteorologiskou stanici Tesla MS360
Snap-on scope housing for an M5Stack AtomS3R + radio board on the Arrow II yagi; clip from Derusi’s verified mount.
Tested good with PLA or PETG.
M5stack atomS3 and S3R enclosure. if you want less tight add 0,1 or 0,2 mm in size.
Chassis Sleeve for an AKG DMS300 Microphone. (5094802-00) Sleeve has ring / indent on bottom that can be colored for mic identification. Print in your choice of materials - I printed it in ABS. Threads may require finer layer heights…
A remix of FRC3038's camera mount for better camera fit/hold and more istall options. This is a WIP (ver 2); Version 3 may have print-in nuts for the tilt axis to elliminate the need for the 3.5"+ tilt bolt
SMC bracket for mounting [Netgear MS305/MS308 Multi-Gigabit 2.5 GbE switches into common Structured Media Cabinets. Supported devices include: Netgear MS305 5-port 2.5 GbE switch Netgear MS308 8-port 2.5 GbE switch This includes printed…
This stand off should be compatible with the following Intel Integrated RAID modules (mezzanine): RMS3HC080 , RMS3JC080 https://www.intel.com/content/www/us/en/products/sku/97950/intel-server-board-s1200splr/compatible.html Designed to be…
Created using the Reality Scan Android app and Onshape - it's not perfect but it fits and works essentially as well as the standard part. The mod is fully reversible and requires only a PH1 driver to move the existing screws over to the…
Whiteboard Marker Holder - quick & easy Print and snap in 2x 38mm magnet (Franken HMS38) Needed: 2x Franken HMS38 Magnet - Source: https://www.idealo.de/preisvergleich/OffersOfProduct/2336992_-haftmagnet-38mm-rund-10-stk-franken.html Hole…
The original dust extraction is too terrible to use the saw indoors. I made this model. Print petg 1mm wall
Rotor is a very tight press fit. If you can't get it on, you can try reaming the hole out with a 3/16" drill bit to loosen it up. This is the intended motor for this siren https://www.amazon.com/dp/B08DG2KXZB No buck converter required.…
My version of Knob for Resprom RMS323 Potentiometer. РЕСПРОМ РМС323
