Liczymy pasujące modele…
This design serves as the basis for designing and printing a speaker mount for a speaker with FlexMount165 or 200 technology. Open the step file in a CAD program and construct tabs at the points where screw connection points are required.…
This is 3Dprint1UPu's model that has been painted for MMU printing. You should just be able to slice and print. Everything has been taken care of.
This design serves as the basis for designing and printing a speaker mount for a speaker with FlexMount100 technology. Open the step file in a CAD program and construct tabs at the points where screw connection points are required. We…
We recommend printing only ABS or ASA if the adapter is to be used in a car. It should be printed without supports with a layer thickness of 0.15mm.
I used an NT1 for years, but since I use multiple computers I wanted audio to input to any of them without worrying about analog mixing and relying on the quality of whatever sound hardware might be in a random machine. The USB-C…
Cover for Honda NT1100 motorcycle steering stem nut. 3mf files exported from Fusion 360 and project files from Orca Slicer. Both have a blank file and logo files. If you import F360 logo files to your slicer you have to align the logo…
Hello Fellow Creators FIXDRY double dryerbox is fine. Using it I have found a couple elements missing I designed for usability and my comfort. Feel free to refer to those ideas, I hope you find them useful. Handle : this is the weakest…
Designed for the Littleguyracingparts Super 8 axles, which means anything with an wheel to wheel of up to 13.5cm. Stock width is like 9.5cm. Works with stock axles, stock axles+hex extenders, Meus isos, Lgrp super 8s axles without hex…
Remove body attached retention hardware and glue in tailgate badge. Relocate control box. Replace front and rear frame spacers using original hardware and holes. Glue in 10x2mm magnets. Glue top pieces to body shell using lower magnets to…
This design serves as the basis for designing and printing a speaker mount for a speaker with FlexMount100 technology. Open the step file in a CAD program and construct tabs at the points where screw connection points are required. We…
Rode NT1 mount - two versions Thickness of the microphone holder ear - 6.4 mm Category: Audio
Honda NT1100 Steering Wheel Nut Cover This steering wheel nut cover is designed for the Honda NT1100, created using PLA filament with a 15% infill and no supports required for printing. The design includes two variations: one with a logo…
Using the Bambu Labs AMS system limits the maximum diameter of the filament spools. This shelf is designed to sit above filament rolls in the FIXDRY NT1 filament dryer for spools within that size limit. The shelf facilitates…
A compact desiccant tray for the Fixdry Double-NT1 that can securely hold silica gel beads. The gaps are about 1.2mm so small silica gel beads will not spill. This uses the 2 holes at the top of the dryer so mind where you will place it.…
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended. This stand is for all Helix Compose…
A cover for center of the triple trees on 2025 Honda NT1100 To make it snug fits, need to increase by 2% when slicing.
An attachment to the Fixdry Double-NT1 that makes it easier to open it. Required hardware are 2 sets of M3 bolt and nuts, or any size as long as bolt diameter is <3.2mm, and nut width <6mm but you loose the snug fit of the nut which can…
Replacement part for telescope eye piece, the one silver part in the picture i uploaded, dont have the telescope model since it was to fix one for someone but did not have the whole telescope, will add it if i can get the info later.…
Rescalable aquarium reinforcement, high durability, fast printing time.The model is originally designed for 10mm glass. Minimum glass thickness is 4mm.
5th attempt at a cable mount. (drawn in sketchup, cleaned with netfabb) I had problems with the clip being too brittle and tried to fix it by fattening the clip. Didn't work? Maybe I need to change some slic3r setting? This is supposed to…
extender for spools wider than 70mm
Front Axle Plugs, keep dirt, debris out.
EDP controller board for NT116WHM NT125WHM-N42 1366X768 MINI HDMI LED 2 TYPE C LCD controller can be found here: https://www.ebay.com/itm/166465703483?var=466110114895 Printed with PLA, threaded inserts are also needed to put the parts…
Overall, I like this multi-stick. But the mount doesn't suit me, especially after it fell once on a rough road. So I modeled the body using a caliper. I'll make the mount later when I have time and inspiration.
These are the tow plastic parts of the latch mechanism of the Honda NT1100's side boxes. I designed them using basic measuring tools, so they aren't perfect. Please don't resell, or repost whit out my approval! If you need the CAD files,…
3D Printer Ventilation for Resin Printers — 120mm Fan Version by 3DVenting.com These are the 3D-printed plastic parts for a dual 120mm fan ventilation system designed specifically for ELEGOO resin printers. At 250 CFM, this is the…
Adapter for using IKEA365 10.6l container as a lid for Fixdry NT1 dryer. Benefits: Enables using large diamater 3kg spools (e.g. eSUN). Material: ASA or other high-temp material recommended. Notes: When setting up drying time, please add…
I created a muffler for the Flsun T1 silent kit
Rear Axle plugs, keep dirt, debris out
Wires holder when add the bar riser ¼ 20 screws or M3
OnePoint articulation for Dummy13V1
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/flrqjYyFhi5 A simple mount to hold an ASUS 3Dd scanner onto a Surface 3 Pro. Changing the width of the clips would adapt this mount to suit other tablets…
I broke the front screen's hinge on my RØDE NT1-A's mount (apparently called the SM6 ), and instead of dealing with some weird imperial thread ( Untermenscheneinheiten ) I 3D modeled a replacement for M5 hardware. You need: A 5 mm drill…
Designed for NT1, but may also work for other Rode large diaphragm condencers: NT1-A, 5th gen, NT1000 etc. The 3/8"-16 thread should fit most microphone arms and stands. Support is included in the model (0.12mm gap). Should be easy to…
Honda NT1100 Steering Wheel Nut Cover This steering wheel nut cover is designed for the Honda NT1100, created using PLA filament with a 15% infill and no supports required for printing. The design includes two variations: one with a logo…
I broke the front screen's hinge on my RØDE NT1-A's mount (apparently called the SM6 ), and instead of dealing with some weird imperial thread ( Untermenscheneinheiten ) I 3D modeled a replacement for M5 hardware. You need: A 5 mm drill…
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended. This stand is for all Helix Compose…
