Wyniki wyszukiwania: oda

Master Yoda Figure

Made possible by my amazing Patreon supporters! If you like my work and want more models and pre-supported files for resin you can support me in Thangs This model is support free BUT i recommend you use a support pillar right next to the…

Low-Poly Baby Yoda book stand / book end

This is a book stand for your library that makes it look like Yoda is holding your books using the Force. Since the models are separate and the pin holding the character in place is on the book stand part, you can also just print the Yoda…

Beer Can Lid/Soda Can Lid/Bug Cover (no supports needed)

Updated - July 27, 2024 - added tolerance test and more tolerant sliding covers After receiving a number of complaints about the lid not snapping to the cover and knowing that each individual printer may not be configured to print holes…

Low Poly Grogu (Baby Yoda) (No Supports) (FIXED)

Remix of Val's Grogu from Mandolorian Original model https://www.thingiverse.com/thing:4038181

Sodastream bottle adapter V1 for standard 0,5 liter pet-bottles

For sealing you can eather use a o-ring gasket D20x3mm or print the gasket with tpu or flex material. The gasket has to be placed on the bottle side inside the thread-hole Supports are only needed for the outer ring, i used a…

Fruit Fly Trap for Soda Bottle

Print it in yellow, fill bottle with some orange juice (and a splash of vinegar) - fruit flies like yellow a lot

Fruit Fly Trap for Soda Bottle

A trap that works. Those nasty little buggers love getting in, have no clue how to get out

Stackable SodaStream Bottle Drying Stand

This stand is made for the drying of SodaStream bottles. Multiple stands can be stacked , regardless for which bottle. Currently there are models for the following bottles: SodaStream DUO plastic bottle (30 mm inner diameter) SodaStream…

Master Yoda Statue - Star Wars Home Decoration

Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)

Baby Yoda thootpaste vomit multimaterial

this baby yoda vomit toothpaste cap is a remix frrom https://cults3d.com/es/modelo-3d/artilugios/baby-yoda-pasta-dientes-thootpaste#_=_ but painted and laminated in prusaslicer and MMU2 Ready. The Gcode and the 3mf are uploaded.

Seat belt - deactiv alarm. Alfa Romeo, Audi, BMW, Citroen, Cupra, Dacia, Ferrari, FIAT, Jaguar, Land Rover, Mazda, Mercedes, MG, Mini, Opel, Peugeot, Porsche, Range Rover, Renault, Seat, Skoda, Toyota, Volvo, VW.

Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…

Grogu (Baby Yoda) - Star Wars Halloween Edition

Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Little Yoda Coffee Mug Coaster

Little Yoda coffee mug coaster D= 10 cm

Sodastream Bottle Cap

A model of a standard, easy-to-print SodaStream cap. I didn't use supports, but if you don't mind taking them off, print quality could be better with them. There are two ways to print this model. One is to print out the complete cap in…

Smart Holder adapter for Skoda

Smart holder adaptér držák vychází z originálu, který byl modifikován pro sportovní sedadla vozidel značky Škoda, včetně pojistky proti vyndaní pokud je vložen držák multimédií ;) postup: tisk z PET-G (z důvodu vysokých teplot ve voze v…

SodaStream glas bottle stand

SodaStream Glasflaschenständer zum trocknen

Meditating Yoda

Meditating Yoda

Škoda Superb Combi

Discover the magic of 3D printing with the fourth-generation Škoda Superb. The meticulously crafted replica of this iconic car brings its elegance, robust proportions, and dynamic design to your desk. Whether you’re a fan of Škoda cars or…

Smart Holder adapter for Skoda only MultiPrint!!

Smart holder adaptér !!!POZOR - pouze pro Colorprint!!! držák vychází z originálu, který byl modifikován pro sportovní sedadla vozidel značky Škoda, včetně pojistky proti vyndaní pokud je vložen držák multimédií ;) postup: vložit model a…

Soda Bottle Cap Wrench

These are the settings for a wrench to open Dr. Pepper bottle caps (and most likely many other brands). diameterB: 31.1 toothCountB: 24 toothHeightB: 0.7 toothWidthBottomB: 2.3 toothWidthTopB: 0.7 toothCurveB: false ringThicknessB: 2…

Kodama Keychain (Remix)

I printed in PLA Kodame: Infill: 15% Layer Height: 0.15mm Supports: Yes, organic Eyes and mouth: Infill: 15% Layer Height: 0.15mm Brim: Yes If you like my work consider Buy me a coffee 😊

Sodastream Bottle Holder

This is a bottle holder for our Sodastream. For licensing reasons, I published this model without the Sodastream logo. There are two different versions of the lid. Once for the 1 liter glass bottles and once for the 0.75 liter glass…

Skoda Fabia 1 (1999 - 2007) phone holder on dashboard

Skoda Fabia 1 (1999 - 2007) phone holder on dashboard Diameter of the ball is 17mm I used the Baseus Car Phone Holder from Aliexpress as the holder itself https://s.click.aliexpress.com/e/_DBAMS11 It is necessary to print the model split…

Baby Yoda (Grogu) with Ball - Star Wars Home Decoration

Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.1-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)

Škoda wallarts

Explore the wide range of Skoda’s iconic models with our exclusive collection of 3D printable wallarts. Whether you're a fan of the latest electric technology, the thrill of motorsport, or the elegance of Skoda’s combustion engine models,…

Škoda Scala

Step into the world of dynamic design with this detailed 3D model of the Škoda Scala, a compact hatchback that perfectly blends everyday practicality with bold style. Its clean lines, balanced proportions and confident stance make it…

Seat belt - deactiv alarm. Acura, BAIC, Buick, BYD, Cadillac, Chery, Chevrolet, Dodge, Ford, GMC, for Honda, Hyundai, Infiniti, Isuzu, Jaecoo, Jeep, KIA, Lexus, Lincoln, Mazda, MG, Mitsubishi, Nissan, Omoda, RAM, Subaru, Suzuki, Tesla, Toyota + TRUCKS

New Skoda Logo Key Tag

This versatile key tag, perfect for owners of the classic Škoda 120 or the innovative Enyaq iV . Designed for convenience, it allows for printing in place without the need for assembly. Compatible with any type of plastic , this key tag…

Can Holder for Beer or Soda / Porte-canettes

To easily transport your beer cans from the fridge to the garden or terrace. Two models of handles are provided for 330ml cans and 500ml cans. A very easy to remove support is required where the handle comes to rest. It is also advisable…

Skoda Enyaq back up camera light hood

The original model fits on a Skoda Enyaq, but it blocks a bit sight at the bottom. Furthermore, i have added a small opening to drain water.

Beer/Soda can opener/closer ... Otvírák/zavírák na plechovky

This model was printed on a Prusa MINI+ printer with custom embossed text without any support. It can therefore be printed without the option of a multi-colour printer. In Prusaslicer, on the bottom side you create your own embossed text…

A Soda Pop can cover

i did add support to the middle to help with the bridge but they can be very easily removed. the can cover can be rotated in and out of the way to keep bugs and debris out of the drink. it holds on to the tab of the drink so it makes it…

Sodastream bottle adapter V2 (DUO) for standard 0,5 liter pet-bottles

Make your sodawater with a 0,5 liter pet bottle, like coke, fanta,… Works on Sodastream DUO, EASY, TERRA, ART, POWER and JET which uses normally 1 Liter Sodastream PET-Bottles Older Systems like COOL,.. have shorter bottles, for that you…

Pi Spinny Earring or Doodad

Pi Day (March 14) is coming up and I wanted to make something for it! This is a small gyro-style spinning pi symbol print designed to be used as earrings, charm, keychain, zipper pull, etc. The pi symbol is designed so that it faces…

SodaStream CO2 cylinder wall mount for kitchen cabinets

This model is a wall mount for the inside of any standard Ikea kitchen cabinet that is designed to hold two of any standard type of SodaStream CO2 cylinders. By using the wall mount the usually unhandy and clunky SodaStream CO2 cylinders…

Knurled 12V Socket Cover - designed for Skoda Octavia III and universal use

Gerändelte 12V Zigarettenanzünder Abdeckung Designed für Skoda Octavia - natürlich auch universell einsetzbar. Mir gefiel am Ende die Version mit mittelfeinen Rändeln (Version “mid”). Tip: Einen guten Alu-Drehteil look erzielt man mit…

Soda Clamp and Headphones

It s a clamp for a desktop that hold a soda can and headphones

Bottle Drying Stand for SodaStream Crystal

Inspired by https://www.thingiverse.com/thing:4602157 I created my own bottle stand for drying (and storing) SodaStream Crystal glas bottles. Important for me was a secure stand (the bottle does not tilt or touch other bottles with two…

Raspberry Pi Screen Mount for Ender 3 - OctoDash/Klipperscreen

A raspberry pi + screen mount on the Ender 3. It attaches to the front of the 4040 extrusion using existing fasteners. Required fasteners: 2x M5x8 - attaches mount to extrusion 4x M2.5x4 - attaches pi to mount The example shown is using…

Master Yoda from Star Wars

Hello, Welcome to my profile, full of models and miniatures :-) I have a Master Yoda from Star Wars for you for an exhibition or diorama. Very cool figures. It is suitable for coloring. My children absolutely love it :-). Important: If…

Skoda logo keychain

Skoda logo keychain

SKODA YETI KEYCHAIN

This unique keychain is a miniature replica of the SKODA YETI, designed with a sleek, compact look at 7 cm by 5 cm . Printed in 3D with a two-color layer change for added depth and visual appeal, it captures the distinctive silhouette of…

Grogu (Baby Yoda) - Star Wars Home Decor

Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)

There goes Yoyo aka baby Yoda's lunch (toothpaste plug)

This is a plug for the “vomiting” baby Yoda to keep the toothpaste running. Print slow! Is is a small model and it will print in under 15 minutes even if you go really slow. No support needed. Just cut the plug to the desired length and…

Star Wars - Bébé Yoda (Grogu)

Cette figurine représente Grogu , surnommé Bébé Yoda, personnage culte de la série The Mandalorian . Avec sa pose attendrissante et ses grands yeux expressifs, ce modèle est parfait pour tous les amoureux de l'univers Star Wars. Optimisé…

3/4 inch PVC coupler with 2 liter soda fitting for irrigation

Uploaded V2 - better tolerances all around, and significantly shortened the overall length to cut down on plastic A ¾" schedule 40 PVC pipe-coupling that adds a 2 liter soda-bottle (standard US-threads). I created this as a cheap way to…

Cute Soda Can Keychain

Easy to make a cute Soda Can keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Kodak film case

Store up to 6 Kodak 35mm film rolls in their canisters. Caution: designed to fit Kodak 35mm canisters. Compatibilaty with other brand film canisters is unknown, but you can always just put the film roll without the canister in the case if…

Garage for 1:24 Skoda Models (unofficial)

A small garage made for the 1:24 Skoda Octavia model (https://www.printables.com/model/762153-skoda-octavia-124), but you can use it for any prints with similar sizes. For the main body of the garage, I've used 0.3 mm layer height, 15 %…

Hitron CODA-4582 Wall Mount

This is a wall mount for the Hitron CODA-4582 or 4680 (Rogers Gigabit) modem. The holes are M3 sized so M3 screws or #6 screw will work. Drywall screws fit as well. Print instructions Print using the included 3mf file or go simple and…

Soporte Celular Yoda

Soporte celular inspirado en la imagen de Yoda de la película Star Wars. Por su diseño también sirve como soporte de Tablet. Se imprime en tres capas de diferente color : negro, verde, blanco. Print instructions Capas: Negro - 0.00 Verde…

Soda Pop 1 liter bottle holder for car

This is a remake of an old product for a 1 liter bottle of pop. the others were prototypes and could be used in with the various mounts for other projects, like peg boards etc. Category: Other

Keychain with logo. Acura, BAIC, Buick, BYD, Cadillac, Chery, Chevrolet, Dodge, Ford, GMC, for Honda, Hyundai, Infiniti, Isuzu, Jaecoo, Jeep, KIA, Lexus, Lincoln, Mazda, MG, Mitsubishi, Nissan, Omoda, RAM, Subaru, Suzuki, Tesla, Toyota.

Keychains in various versions. Keychains modeled after the seat belt alarm lock. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From layer 26 For a 0.16 mm layer (initial…

Air Compressor Flap Holder Doodad for Rivian R1T

A little doodad to help keep your air compressor flaps down. .bgcode file is set up for Prusa Mk4 with generic PETG and has brimming. Works great to pop two of 'em out! NOTE: Gear Guard does NOT lock with this inserted.

Plastic cap for Skoda

Hi, this is a model of a plastic cap for trunk lid for Skoda Roomster. Print settigs: Layer height 0,1mm or lower No supports Material: I used PETG, other should work Note: GCODE has 215C temp as I use that with my SUNLU filament If you…

Sodastream / Wassermax bottle stand

Simple stand that allows the waterbottles to dry out. Fits bot sodasteam and wassermax bottles. Print with standard settings in PLA or PETG

Sodastream bottle holder - easy

Helps to dry your bottle after cleaning. Added an insert-ring for better grip (flex or tpu), but you can also use it without the ring.

Do. Or Do Not. There Is No Try. Yoda Plaque.

I made this Yoda sign to motivate the people at work. This is our motto that drives us to be productive and just get things done! It has 1mm x 10mm round magnets in the back. I printed it in PLA, using a white background, black border and…

keychain SKODA VRS

keychain Skoda VRS 4 colours

Sci-Fi DooDaad Dice

Comboulator Sincropazinator Magilicuddy Tinestick Die. The distracting dice Zaphod Beeblebrox used to help steal the Vogon Ship “Heart of Gold” There are two versions. Regular and Thick.

Karak - Podavač karet

Jednoduchý a funkční držák na karty Karak který se vejde do originální krabice.

Sodastream Bottle Drip Snout with Cap Holder

I liked the Sodastream Bottle Drip Snout shared by @Peter https://www.printables.com/fr/model/50222-sodastream-bottle-drip-snout I printed it, but on first use, i didn't know where to put the bottle cap. So i added a “thing” to place the…

Škoda 1203 sanitka

Tisk na dvě poloviny, podpěry jsou nutné, tryska 0,4, PLA.

Škoda 105

Tisk na dvě poloviny, podpěry nutné, PLA, tryska 0,4, výplň 15%.

Skoda CityGo Magsafe Phone holder

Skoda CityGo, Seat Mii, Volkswagen Up compatible. The 3mf includes a fuzzy skin to remove the visual layer lines. It looks great. Printed in Prusament. with paint on support to guarantee removability. PETG version no need for enclosure…

Herbs, spices container from Sodastream syrup bottle

Using empty Sodastream syrup bottles as containers for herbs, spices, and salt is a practical solution. Their narrow, tall shape fits perfectly in slim kitchen cabinets, saving space while offering high capacity. They are ideal for…

Škoda 1000 mbx

Tisk vcelku, filament PETG, tryska 0,4, podpěry všude.

Foldable Softair soda can target holder

foldable holder, the joint holes measure is 2.3mm, so raw filament can be used for the final assembly. some WD40 and small screwdriver to clean the passages are needed in order to ease the final assembly 2 printing files due to dimensions…

Skoda Enyaq trash bag hook

This hook fits the center console of a Škoda Enyaq and can be used to hang, for example, a trash bag or another small pouch. To improve the fit and ensure it stays put, apply small pieces of self-adhesive felt (the kind used on furniture…

SodaStream Deckel für Glasflasche 0,8l

Deckel für SodaStream Glasflaschen mit 0,8l Inhalt. In den Deckel passen Dichringe mit 35mm Aussendurchmesser.

Škoda 1203 ROL valník 1975

Tisk na dvě poloviny, podpěry, výplň 10%, tryska 0,4.

Sodastream Crystal 2.0 - Glass bottle flask attachment / Glasflaschenhalter Befestigung

*Englisch Below* GER: Die Glasflaschenhalter Befestigung meines Sodastreams ist gebrochen, darum habe ich ein Ersatzteil entworfen. Kann je nach Genauigkeit des Druckers richtig herum oder über kopf gedruckt werden. Passt möglicherweise…

Škoda coaster / podtácek

Škoda coaster / podtácek

Skoda wheels Logo ⌀9cm

Skoda wheels Logo ⌀9cm if you want you can make it smaller and fit it as car logo. Model was colored with marker

Skoda Fabia 4 keychain

Dimensions: 80 x 27 mm (width x heigth) Modifier (Skoda Fabia 4): Top and Bottom layers: 0 Perimetrs: 1 Infil: 70% Infill pattern: Grid Colors (using multicolor by layers): 0-1.4 - Black 1.4 - White or silver 1.6 - Color of car (Orange)

20 Tiny Nesting Bowls - Great for board game & doodad organizing - Matryoshka bowls

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . 1/10/2025: Complete Design…

Škoda TUDOR vojsko

Tisk na dvě poloviny podélně, PLA, tryska 0,4, výplň 15%.

Whel cover logo for Skoda Fabia 1

I lost the logo on my car wheel, so I designed a similar one. I used two colors. I printed in Prusa MINI used 0.25 nozzle. I used the 55 mm version. The filament replacement is included in the gcode.

Knife holder for Marbodal

Suitable for marbodal cutlery box. Fits 3 knives with naked blade, and 2 knives in knife sheath. https://www.marbodal.se/skapsinredning/lador-och-ladinredning/besticklada-gra-tbx-80

ŠKODA POPULAR Monte Carlo (1936-1939)

ŠKODA POPULAR Monte Carlo (1936-1939)

Velcro soda mug handle - bottle or can

Printed with PLA 1,75 mm. Used a standard Velcro band

Sodastream Penguin Untersetzer

Untersetzer für den Sodastream Penguin damit das überlaufende Wasser nicht immer auf der Arbeitsfläche landet.

Voda pro slepice

Neuměl jsem najít dávkovač pro slepice se závitem který by pasoval na skleněnou láhev ,protože ty plastové PETKY se při podtlaku deformovali ,Je to klasická lahev od vína 0,7l se šroubovým uzávěrem , tak dlouho jsem testoval závity až…

Sodastream easy open cap cover

I like "sodastream" bottles and use them while cycling. But when my hands are wet, unscrewing the original caps is very difficult. These covers for the original caps do the trick. They add little to their size (they are quite thin, look…

Škoda 1101 TUDOR sanita 1948

Tisk opět na dvě poloviny, PLA, výplň 10%, tryska 0,4.

Škoda RAPID 1,4 SV rok 1936

Tisk tentokrát na zkoušku vcelku za pomocí podpěr. Filament PETG, výplň 15%, tryska 0,4.

Páka posunu sedadla Škoda

Originální páky se ulomily, tak jsem si nakreslil jednoduchou náhradu. Pravá i levá část je stejná. další verze by šla zkrátit a zapustit do těla pro větší pevnost, ale tohle funguje dobře už pár měsíců :) tištěno z PETG mělo by sedět na:…

Škoda 440 Spartak Polytex Roadster 1956

Tisk na dvě poloviny, podpěry, výplně, PLA, tryska 0,4.

Rocket versus soda can

Some things make you think ! This should have been a can holder for the can holder contest - targeted to add a better grip to a soda can and add a little funny twist. So I began to think…..and made the most out of it. The concept (third…

Skoda GoPro Mount (fits Audi, Seat and VW as well)

Mount this on your Skoda's front seat for a POV of your road rage, snack spills, and those epic sing-along sessions!

SodaStream Glass Carafe Bottle Stand

Due to the decreasing diameter towards the bottom of the SodaStream bottle https://sodastream.com/products/glass-carafe it tends to tilt over, for example when you have them stored in the fridge door and you open or close too quickly.…

Trodat 4638 stamp cover

Print settings: nozzle: 0.4mm layer height: 0.2mm material: PETG perimeters: 3 infill: 15% supports: no color change: 1) 0.4mm, 2) 1.0mm note: for better quality emblem Irecommend use only one perimeter in first layer.

Škoda Fabia II

0.2 Speed Fill 30% PETG

Y-Rail Adapter modified for usage with Hyperpixel 4" Touchscreen LCD with Raspberry Pi4 for Octoprint and OctoDash for Prusa i3 MK3S+ (version without power button)

Y-Rail Adapter modified for usage with Hyperpixel 4" Touchscreen LCD with Raspberry Pi4 for Octoprint and OctoDash for Prusa i3 MK3S+ https://www.prusaprinters.org/cs/prints/70062-hyperpixel-4-touchscreen-lcd-raspberry-pi4-without

Narrow Can Holder for Beer or Soda / Porte-canettes étroites

To easily transport your beer cans from the fridge to the garden or terrace. This template is suitable for certain narrow-diameter cans (57 mm or 2"1/4) with a capacity of 250 ml or more. (For larger cans with a diameter of 66 mm - 2"…

Compact SodaStream Bottle Stand

Simple 2-part sodastream bottle stand that assembles for use, and disassembles afterwards in seconds for space-saving flat storage in a drawer (or similar). Printing: Material - anything you like really - not important. Silk PLA pictured…

Sodastream bottle holder

Recommend printing in waterproof PETG :)

Soda Siphon Station

I love seltzer, so last year I bought myself a soda siphon to make it at home. I hated having the pieces sit in the drawer, and I also didn't like the box of CO2 chargers just sitting on the counter all the time. So, I set out to design a…

Karmnik dla ptaków z podajnikiem ziaren

Model wydrukowany na Prusa Mini. Do sklejenia po wydrukowaniu. Dodatkowo należy dorobić stojak (w moim wypadku ze znalezionych w domu fragmentów drewna). W karmniku dodatkowo zaprojektowano dozownik na ziarno, które automatycznie dosypuje…

Sodastream Extinguisher/ Instant drink cooler

Just screw the adapter on, and push the button. Attention: Be careful this is not a toy, it can get to extremely low temperatures.