37 modeli
Let me share with you another design of a poke-planter. Suitable for growing succulents, microgreens, or small houseplants. I hope this will brighten someone's day. I will be happy to see your prints and your "hairstyle" variants, so…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Let me share with you another design of a poke-planter. Suitable for growing succulents, microgreens, or small houseplants. I hope this will brighten someone's day. I will be happy to see your prints and your "hairstyle" variants, so…
Let me share with you another design of a poke-planter. Suitable for growing succulents, microgreens, or small houseplants. I hope this will brighten someone's day. I will be happy to see your prints and your "hairstyle" variants, so…
PLA; filling 15%; 0,15 mm Quality; No supports; Remixed oddish planter, drip plate are attached.
Hi, this is just a remix of the magnificent work done by the original creator. I've just add some holes on the bottom of the pot to drain the excess of water (when the pot is in the exterior) I've printed in 0.28 layer Hight. No supports…
I have tried to include any and all pieces of pertinent information for this model, but ultimately you will want to slice the models to your needs. I test every model before I release it (most of the time with a 0.6 mm nozzle), and below…
This is a large print. Time depends on your printer and settings. Rafts / skirts / brims are not really needed if your bed adhesion is okay. If it won't stick to the bed, use a raft. PLA is our preferred option, however you can use PETG…
I couldn't resist printing @Thanh3D ‘s adorable oddish planter. But if you’re a plant lover like me, but struggle at keeping them alive, this trellis has you covered! Designed to complement your Oddish planter, this trellis offers not…
No support oddish. Colored 3mf included.
Overview Pokémon fans unite with this playful Oddish bobble! Enjoy watching Oddish bounce to and fro with the addition of 3D Printy 's bobble-head springs. Printing I printed using PLA on the Prusa i3 MK3 with variable layer height to…
Combined Oddish Pokemon Planter from Llλmbda ( https://makerworld.com/en/models/47110#profileId-109577 ) and 17cm diameter tire with texture from lavernay ( https://makerworld.com/en/models/28542 ) to make this tire swing planter/pot for…
Hey guys! Here is a model of Oddish from Pokemon. You will need supports turned on when printing. Hope you enjoy! I designed this using Fusion 360.
Printable 3D model. Pokemon inspiration, Oddish Planter Vase. STL file.
Low poly Oddish, the Root Pokémon. A small Grass/Poison Pokémon for collectors.
My attempt at an Oddish vase, with a themed tray. It prints easily without support and with a good infill should hold water.
I had the best results printed at 100% infill, that adds a little extra weight to the bottom at the feet. Got very good results hot and slow with translucent PET-G but also quick good results with PLA+ Hope you enjoy!
This is a saucer dish for your Oddish planter. I printed mine at 200% scale. Enjoy!
I mashed half of Blop3D's Oddish planter into the cap of a Vorpal hexapod in order to create my own take on luke147II's Flora project: https://www.thingiverse.com/thing:3419428
oddish planter model, with body filled out, and hole placed through middle to hold fake succulents commonly found at most Walmarts
Made for my Stained Glass Resin Trays and thought I would share it with all of you. Can be modified to add a hole at the top to hang from windows as a sun catcher. Design is a perfect fit for AOEDEO 5 pcs Oval Resin Tray #4…
Made for my Stained Glass Resin Trays and thought I would share it with all of you. Can be modified to add a hole at the top to hang from windows as a sun catcher. Design is a perfect fit for AOEDEO 5 pcs Oval Resin Tray #4…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
I couldn't resist printing @Thanh3D ‘s adorable oddish planter. But if you’re a plant lover like me, but struggle at keeping them alive, this trellis has you covered! Designed to complement your Oddish planter, this trellis offers not…
#043 Oddish – Print Oddish in Parts! Description: Say hello to Oddish , the cheerful little plant Pokémon! This fun multi-part model is a breeze to print and makes a quirky, adorable addition to any collection. 🌿🔵 Features: ✨ Multi-Part…
🌿🌙 #043 Oddish – Print Oddish in Full Color! Description: Bring home the quirky charm of Oddish with this vibrant full-color print! Perfect for Grass/Poison-type fans and anyone who loves a cute, leafy Pokémon for their shelf. 🌿✨…
Print this with your multicolor setup using the colors described by the names of the STLs. Insert 3x8mm magnet in back.
My own variation of the Oddish Pokemon Planter that's floating around. I wanted one where I could print the eyes and mouth as seperate colors and then just glue them into place. Print 2 Eyes and 4 of the risers for underneath to allow…
I needed a new tray/device thing to plant catgrass for my cat because the one I bought didnt really hold the grass in place so the cat ripped most of it right out instead of just eating the tops. That old one only had 1 mesh layer so I…
Printed right from the file, you can fit a 2.5" pot into the planter if you like to double up like I do, or you'll have the entire cavity of the Oddish with a 2.5" diameter opening for your plant. Print with or without drainage holes.…
I decided to break this model apart for multi-material printing. Print instructions Category: Toys & Games
Hello everyone, I present to you my articulated mystherbe/oddish. It is 100% articulated, it can be put in different positions. It prints in place, without support. It is compatible with PLA. You will find 3 versions: STL 3mf for Bambulab…
