Wyniki wyszukiwania: p55

Sortowanie

Liczymy pasujące modele…

P
PrintablesTrollmaster_LP

G&G Arp9 Arp556 Stock Tube Extension

Just my Remix of the Stock Tube Extension for Arp 9 and Arp 556 Print instructions Category: Sport & Outdoors Summary Just my Remix of the Stock Tube Extension for Arp 9 and Arp 556 Print Settings Printer Brand: Anycubic Printer:…

Pobrania
181
Polubienia
13
Ocena
5
P
PrintablesJEO

Ryobi P552 Saw Clamp

This will take a little bit of mechanical work to complete. All parts printed without supports. Parts and tools I used. 3/8-16 ready thread rod about 6 to 6 ½ inches 5/16 flat washer 6-32 x 3/8" screw #6 flat washer super glue 6-32 tap…

Pobrania
173
Polubienia
66
Ocena
5

GoPro Chin Mount for Airoh Helmet GP550s

Fits the Airhoh GP550s helmet like a glove, you will need additional 3M VHB 4991 2.3 mm adhesive. For best results use PETG for added strenght and the following settings: 4 walls 45% Infill Enable support You can leave the remaining…

Pobrania
144
Polubienia
6
Ocena
5
P
PrintablesJEO

Ryobi Saw P552 0-clearance

Printed on an Ender 3 with a magnetic pad. I set the print at 45 degrees on the bed to keep it from the edge to help prevent any curl up. Used 3D-Fuel Lulzbot Green PLA. I used the same screws to mount the new plate and slowly lowered the…

Pobrania
105
Polubienia
34
Ocena
0
P

Air Vents for Airoh helmet GP550s

During a motorcycle ride, I lost one of the air vents on my Airoh gp550s helmet. I made a 3D scan of the original air vent (the one I still had attached) and recreated it with 3D printing. For printing I used adaptive layers in the…

Pobrania
35
Polubienia
1
Ocena
0
P
PrintablesNikolay Severov

Airoh Helmet Gp550s replacement

scanned on phone, smoothed a bit, glued together for further processing and painting. Be careful on the roads. Add 0.5% for shrinkage. PETG. 0.2 my friend, who was in an accident, is a painter and is now painting these parts and the whole…

Pobrania
26
Polubienia
0
Ocena
0
P
PrintablesMove3D

upgrade box ip55 fan 120mm

modification for IP55/65 box to introduce air flow and cool the internal active components. draws air from below. apply external silicone gasket.

Pobrania
24
Polubienia
0
Ocena
0
P
PrintablesCrazyCaribou

Sony BP-HP550-11 Battery Harness for rechargable AAA cells

Summary This is a battery harness designed to replace the original Sony BP-HP550-11 battery pack, which typically costs around 25 €. It allows replacement AAA rechargeable batteries to be charged using the original Sony MDR‑RF855RK base…

Pobrania
22
Polubienia
5
Ocena
0
P
PrintablesSkypodx

Selaclean Pro - Bigger foam cannon holder for AVA Smart P55 pressure washer

The original foam cannon holder for the AVA Smart P55 was too small, so I made a bigger one to fit my new foam cannon. This one has internal diameter of 108 mm. Just swap out the old holder, this one fits perfect. Printed in PLA with…

Pobrania
18
Polubienia
3
Ocena
0
P
PrintablesTigerTone

Heavy Duty TP55 Sensor Bracket (Peg Mount)

A Heavy Duty remix of Dark Squirrel Designs Ankermake M5 Sensor Mount. This is a thicker and more reinforced version of the peg mount for the TP55 sensor. This version creates less vibration and wobble for the sensor. Do you want to be…

Pobrania
15
Polubienia
0
Ocena
0
P
Printableshsus

Baby monitor ears (Motorola MBP55)

I got a cheapish baby monitor from Motorola, while it does the trick it doesn't look very fun and I was envious of the (at least in my part of the world) discontinued arlo baby monitor that came with rabbit ears; So I went ahead and made…

Pobrania
14
Polubienia
5
Ocena
0
P
PrintablesJakob

Festo Festool Atf55 Ap55 Ap65 Vacuum Adapter

Festool Tracksaw (Atf55 Ap55 Ap65) Adapter for Vacuum (Metabo ASA)

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesGigabeast

Leaf Grabber Mod for DARLAC Grab-N-Lift DP556 15deg angle and slightly longer.

It used to be possible to buy leaf grabbers that were slightly angled at the head (I think Gardman made them, but they've changed the design). That way you could pick up leaves that were a little further in front of you rather than right…

Pobrania
8
Polubienia
0
Ocena
0
P
Printablesnguyenkvvn

G&G ARP9/ARP556 Stock Tube Extension (Shortened)

A shortened stock tube extension for use with an existing G&G stock tube extension.

Pobrania
8
Polubienia
0
Ocena
0
P
PrintablesBMan

Steam Frame battery mount for INIU P55 with top strap

Required Hardware 55 cm length of 1 inch nylon webbing Rubber band Print Settings 0.2mm layers 2 perimeters (with 0.4mm nozzle) 10% infill No supports (includes built in supports) The built in supports are 0.4mm wide fins in the belt…

Pobrania
7
Polubienia
2
Ocena
0
P
Printableschuck

Philips HP550 Replacement Headphone Bracket.

Learning to make 3d objects using tinkercad. This is a bad model and a work in progress, do not use. :) I thought it would be fun to upload though, so I don't feel like a leech here.

Pobrania
7
Polubienia
1
Ocena
0
P
PrintablesN0Rand0mNam3

Ump556

Beware the thing nobody knew he didnt need! The thing noone asked for, the thing that makes a classic cursed, the ump45 m4 mag adapter! I wanted my ust45 (…

Pobrania
5
Polubienia
3
Ocena
0
P
PrintablesSáňka

List kormidla k P550

Projekt ukazuje postup výroby listu kormidla na loď (skautská pramice P550)

Pobrania
2
Polubienia
0
Ocena
0
P
Printables

G&G ARP9/ARP556 Stock Tube Extension (Shortened)

A shortened stock tube extension for use with an existing G&G stock tube extension.

P
PrintablesDaveStruve

Feinwerkbau Air Pistol C20, C25, C55, P30, P55, and 102 Grip

These are grip files based on the later style contoured grip that came on the Feinwerkbau C55P. This is designed for the C20 Pistol, but should also work on the Feinwerkbau (FWB) C25, C55, P30, P55 and 102. The grips are designed to reuse…

Polubienia
3
Ocena
0