Liczymy pasujące modele…
The original model had the problem that it did not fit into the Elgato Prompter with the high position of the cutout. Here the camera position is more centred so that it fits well and you can also look centrally into the prompter for…
Smallrig Desview Teleprompter Gridfinity Storage (3x1 Grid) Sideways Stand
Credit for the teleprompter goes to KatzCreates: https://www.printables.com/model/90999-camera-lens-mounted-teleprompter
PLA is just fine for all the pieces. On my YT channel (and here on Printables) you can find the external battery project.
The stock back light shield shroud on the Glide Gear TMP 75 can be a bit wonky and doesn’t always block light as well as it should. This is a replacement rear cover designed to improve light blocking and give a cleaner, more effective…
I made this adapter for the Elgato Prompter to interface with my Logitech Brio Webcam. The webcam fits snugly in the adapter and rests against the pegs on the inside. I printed it with supports with generic black PLA. A black filament…
This model allows you to use longer lenses that wouldn't traditionally fit with the teleprompter. I did use a higher infill % (50%+) and I did use longer screws to get it to fit with the teleprompter. Warning: This does cause the…
You can build a prompter by re-using an old LCD monitor. 4:3 is preferred over 16:9. You also need a half mirror and all this needs a mount and a way to add a camera. Using 12 mm tubes and the parts from this post you have it!
This compact, easy-to-assemble teleprompter is designed for DSLR cameras and works perfectly with the Tamron 17-28mm lens at focal lengths down to 22mm. It lets you read your script while keeping direct eye contact with the camera,…
The Ulanzi RT02 Universal Teleprompter officially supports only the FaceCam Pro (haven’t tested it myself, so no promises about how well it behaves). My adapter comes to the rescue, ensuring a stable mount for the FaceCam at the back…
Here is a little niche print for you: A mounting option to fix the OBSBOT Meet 2 to the Elgato teleprompter. Including privacy screen which uses a screw of the now obsolete universial mounting plate. I printed this with 0.2 mm layer…
This is an adapter to mount an DJI Osmo Pocket 3 to an Elgato Prompter. Watch my video for more details: https://www.youtube.com/watch?v=MmlzIaYuW3Q
Credit for the teleprompter goes to KatzCreates: https://www.printables.com/model/90999-camera-lens-mounted-teleprompter
Measurements are slightly over to fit perfectly printed with PLA. Not sure yet, but should fit Panasonic AW-UE150KEJ PTZ.
Backplate for the Elgato Prompter to fit a Sony 16-50 E Mount lens.
This allows you to use an iPhone 11 with a Parrot Pocket Teleprompter, specifically with an "NTG Rugged Case". There is another version of this model for the bare phone. There are two versions of this model, which can be generated in…
This allows you to use an iPhone 11 with a Parrot Pocket Teleprompter. There is another version of this model for use with an "NTG Rugged Case" (the cheapest case I could find). This model is slightly less good than my case version, as I…
This is an adapter for Nikon to be used with @katzcreates Teleprompter https://www.printables.com/model/90999-camera-lens-mounted-teleprompter
This is a budget-friendly 3D printed teleprompter utilizing a 20x20cm glass pane from a standard 99-cent picture frame (Action Store). It features a 76mm lens opening (fits 72mm lenses with minimal light interference), a 15mm rod system…
A quick little foot pedal remote for my teleprompter! For more information & the code for this project, check out The Stock Pot website Parts Required 4 x M3 x 10 Cap head screws 1 x Lolin ESP32 LITE 1 x Lipo battery 3 x Momentary push…
This model is designed to use this monitor from Amazon: https://a.co/d/0rkTGwB And this cold shoe adapter: https://a.co/d/13R9GcO I use this phone tripod mount to hold the phone and to provide the front cold shoe to hold the monitor…
Elgato Prompter Backplate for Sony A7C Kit Lens (28-60mm). Backplate allows the inner lens barrel (extended) to fit into the hole. The outer lens barrel will rest against the backplate creating a light seal. The extended lens will…
This is my first release of a 3D printed teleprompter with NATO rail mount. It works perfectly with phones and small tablets. I am using a Smallrig articulating 11" arm on my camera rig to hold it in front of the lens. This makes it easy…
My iPhone 16 pro max is a pretty good camera, im surprised that theres no existing adapter for the elgato prompter. anyways, i thought that was dumb so i made one. works great if you print it with a .8 nozzle oriented the way i have it in…
For the Elgato Prompter XL. It's a shorter L Bracket to save some space for use with Elgato Facecam Cameras. I am using it for the Facecam Pro, but assuming it will work with the other Elgato Cameras. I printed with: Solid infill The…
a backplate for Elgato Teleprompter made for their new Facecam 4K with filter support
PLA is just fine for all the pieces. On my YT channel (and here on Printables) you can find the external battery project.
This is a custom adapter ring created for use with the Ambitful teleprompter and the Fujinon XF23mm F2 lens. The stock adapter ring set starts at forty nine millimeters and does not attach securely to this lens. I designed a precisely…
This is a custom backplate adapter for the Elgato Prompter, designed specifically for the Sony ZV-E10 with the kit lens. It allows a clean, stable mount of the camera behind the prompter while keeping the setup compact and well-sealed. ✨…
My iPhone 17 pro max is a pretty good camera, im surprised that theres no existing adapter for the elgato prompter. anyways, i thought that was dumb so i made one. works great. I made a window in the back so you can get a preview of what…
The stock back light shield shroud on the Glide Gear TMP 75 can be a bit wonky and doesn’t always block light as well as it should. This is a replacement rear cover designed to improve light blocking and give a cleaner, more effective…
If you have an Elgato Prompter that you use with a DSL[RM] and have ever switched lenses or removed the camera to use it elsewhere, you know exactly why I created this model. I would've liked to store the Step Up Rings in the drawer where…
A wall mount you can screw on wood or a wall for the Elgato Prompter. Easy to hang on a wall or desk.
This model is a smaller L-bracket for the Elgato Prompter designed specifically for the Logitech StreamCam. The goal was to minimize the rear overhang. You'll need to pair this bracket with this adapter plate .
These are parts for making a teleprompter. The square holes are sized for 1" square tubing. See the video for assembly: https://youtu.be/LPBT2AuJd7g 4mm x 5.5mm x 8mm Hotmelt inserts (I couldn't find the exact ones but something like…
i had a few problems with original design not being merged properly, so i went ahead and remixed it to print with better parameters. i made walls wider to be able to print with bigger nozzles. Print Settings Printer Brand: Creality…
Basically I made it more 3d printableish, made it sut iPad 5, removed useless lower plate and replaced it with a swapable quick-release tripod mount. I needed to make one specifically for my tripod, so it probably won't fit for you. (You…
Introduction This model provides an effective, low-cost teleprompter for livestreaming and recording. Using a Raspberry Pi and Pi Camera (the cheap, non-HQ one provides great full-HD video in this application), your phone to display your…
With this setup, you can use a regular 5X7 frame glass and turn it into a small foldable prompter for your phone. The only other things you need beside the fram glass are some way of glueing both glass side pieces together, 2 X ¾ inch…
Adapter component only for Katz Teleprompter. Best printed in PETG, very snug secure fit with the adapter ring. Designed to specifically fit Neewer Macro Light/Flash Ring, which comes with a set of rings for various lens sizes. Can be…
Check out the full build video on my channel here: This is my take on a DIY teleprompter using some beam splitter glass and ½ aluminum tubing. I wanted it to customizable, adjustable, light weight, but most importantly, functional. In the…
This is a teleprompter designed for use on the Macbook Pro, but may well work with many other laptop brands and models. The hood slides on to the laptop screen and has a small circular hole for the webcam. You can then record video from…
Introducing the Teleprompter, a meticulously designed 3D model exclusively compatible with the PolarPro BaseCamp system. With its seamless integration with PolarPro BaseCamp, our Teleprompter unlocks a world of possibilities. Not only…
I like the Parrot portable teleprompter, but the few times I tried using it mounted on Canon EF-m 22mm lens, the lens motors were not happy focusing with all the extra weight. So, I had this thing sitting in storage until I decided to…
The original Teleprompter PAD iLight 12" that I purchased has a very sturdy metal and long camera plate, but it's too bulky and long for smaller cameras, so I made a lighter and shorter replacement that fits the original scre poisitons.
Just a simple teleprompter that can be printed on an Ender 3v2 or other printer with a print bed at least 210 mm x 210 mm. I used Speedy777's design as a jumping off point. The arms fit a Samsung Galaxy Tab. A YouTube video showing how to…
A fully usable teleprompter setup for large screens up to about 13". Works with lenses down to 20mm (full-frame equivalent) or possibly even wider! It uses a standard 15mm LWS rod system for flexibility and strength. The screen used is a…
I designed this mount to allow my Logitech StreamCam to fit in the mount of my SmallRig Teleprompter.
Simple Elgato Prompter backplate for Logitech webcams like the C920 HP Pro. Print instructions: 0.4mm nozzle 0.2 layer height Support on build plate only.
Bracket for the Teleprompter file from Katz Creates to accommodate a 77mm step up ring with a 4mm thickness.
UPDATE: see the corrected version by @Bingohecht_223494 https://www.printables.com/model/1044021-elgato-prompter-logitech-streamcam-adaptor-fixed The Elgato Prompter comes with a lot of adaptors and flexibility, but I wanted a cleaner…
I made this adapter for the Elgato Prompter to interface with my Logitech Brio Webcam. The webcam fits snugly in the adapter and rests against the pegs on the inside. I printed it with supports with generic black PLA. A black filament…
No supports needed. Print in black material. The camera is held in place by a rubber band. Simple Elgato Prompter backplate for Logitech webcams shaped like the C920 HP Pro.
Printable on 256mm Bambu without supports. Almost any material will work starting with PLA. If you print from trranslucent material you can see through if the screen is on.
Update Jan 26 2022 - After using this build for a few months, I recommend against any plexiglas. It still works great, but due to the statically charged nature of plastic sheeting, it's been nearly impossible to keep clean for long and…
UPDATE: Thanks to community feedback I have added additional sized inserts for different phones (so there's more of a chance of a snug fit for your phone, but a looser fit is okay long as it doesn't fall out!) as well as a version with…
I purchased an Iloknzi teleprompter and was disappointed it didn't have any hot/cold shoe mounts for a light, microphone, etc. The booklet for it shows side brackets on the equipment list but they're not included nor are they available. I…
Together with Alexander Schwartz , we designed an adapter to mount the Logitech Brio Stream webcam to the SmallRig Teleprompter TP10 (SKU 3374) Here is the tinkercad source in case you want to modify it.
You will need a glass or acrylic plate measuring 222 mm * 138 mm. Prints without support.
Spanish Este adaptador para Elgato prompter está diseñado para la cámara MX Brio con los siguientes objetivos: Uso mínimo del espacio trasero Permitir el máximo ángulo de vision de la cámara. Fácil extracción de la cámara para…
I hate seeing double when trying to pay attention in meetings and presentations. This is a shield to block your view of the prompter screen to avoid being distracted by an upside-down screen. Not sure why ChrisP marked his model as no…
It is so easy to build your own teleprompter from whatever leftovers you have, for example, a 4:3 LCD display. By the way 4:3 is way better than 16.9 because of the narrower line and this way your eyes won't be moving left-right so…
