Liczymy pasujące modele…
I was searching for some coat-hooks to make, but all lacked the personality I was searching for. This hook has two protrusions at slightly different angles. One with a sharper end to catch the collar of a jacket or coat, and the other…
As an example of how you can use my T-Clip system for attaching to Skadis pegboard, I remixed my Squiggle Coat Hook design. Just print the hook and a couple clips that match the type of your Skadis board.
I was delighted to find here the Torus Toy model by @lubosz We used to have a much smaller version many years ago and i decided to try and remix it and build a larger and more complicated version. The result is fantastic. It prints in…
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wheels for my business card embosser, these ones have a wave pattern. Designed to work with: https://makerworld.com/en/models/485772 please download and print the case + gears from above.
A squiggly ring designed in OpenSCAD. The included stl has 19mm inner diameter, but can be scaled for other finger sizes. About 40 minutes to print in PLA at 0.08mm layer height.
Remixed spool dryer to make it compatible with 350W food dehydrator! Tested with Silvercrest and Quigg components! Made also some change to the mode: PTFE guides moved to the back; added PTFE guides to the base instead of the middle part;…
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
A fun triblader for recreational throwing. Made in Blender using a non-destructive workflow, so you can easily manipulate some control points in the Blender file to change the shape. The model might be a bit too large for many printers,…
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
A fun pie dish shaped jewellery dish. Printing and Assembly The dish shown in photos was printed at 0.2mm layer heights using a 0.4mm Nozzle. It should print well with larger nozzles, although the crisp edges may become more rounded.…
Cutting edge is 0.4mm. I personally printed with a 5mm raft, 0% infill Made for cutting/stamping polymer clay for jewelry but can be sized larger for cookie cutting. Modeled and created by myself.
This Blender-based sculpt was a playground for animation, creating armatures and muscle sculpting. It is my first work in the world of lizards (and bipedal-scavengers). The original figurine/ model is pose-able and has yet to be printed.…
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Interior diameter is 3.0 inches / 76.2 mm. Interior height is 2.0 inches / 50.80 mm. No supports are required. The model responds very well to scaling in your slicer if you want different sizes. The table below provides scaling factors…
This small soap dish has a squiggle border around a decorative hearts pattern on the bottom to keep the soap dry. You can also use it for cotton pads or similar objects which need to dry somewhere. It is not my favorite, I like LR2166…
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly Top Oui Yogurt Cap
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
I wanted to use this good looking hook designed by Line Arc Line with double sided tape without seeing the holes, so I simply removed the holes. If someone wants a little recess on the back of the hook to accommodate thicker tape, just…
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
A battery compartment cover for the QUIGG DK-3015q kitchen scale sold by ALDI. I slightly modified the original model created by https://www.printables.com/@eSeL , so that the batteries have a little more room. Not sure if my batteries…
A triblader boomerang with fun, squiggly wings; for recreational throwing. Made in Onshape; the document can be found here .
If you've come this far, you've noticed that the ring is printed as a helical coil shape, and you may or may not be intrigued at that thought. Well it's not. It's a very simple flat four-minute print, heated and wrapped around a mandrel…
SquiggleAide is an assistive writing and drawing aid designed for individuals affected by arthritis, paralysis, reduced motor function, etc. This tool helps users write or draw comfortably while requiring minimal grip strength to hold a…
This is a simple tablet stand I made for my iPad. Holds the device at a 60 degree angle. I included two versions, one without the hexagonal cutouts. I also included the .step files in case you want to modify it to fit your own device.…
This is a remix of @Line Arc Line's Squiggle Coat Hook that has been adapted to clip onto 25mm or 1 inch wooden slats instead of using screws. This hook is also 1mm thicker than the original and the upper hook is longer. This hook is…
A bucket in the fashion of the “Squiggly Purge” purge line macro. The latest version of the Macro can be found on GitHub .
Hi, I introduce you to my new design, a Squiggle Toothbrush Holder
The squiggle plant pot, perfect for smaller plants for around the house and office. Designed with Rhino 3D 2 Separate Parts Material Usage: 160 g Material: Matte PLA Build Adhesion: Skirt Dimensions Base: 136 x 136 x 115 mm Drainage Tray:…
this is a squiggly spiral vase. Scale it to the size you want. and print it in vase mode.
A squiggly line test print for 3d printers.
This is a nozzle for the handvacuum QUIGG MD19458H sold by Aldi. The vacuum has a pretty shitty shaped nozzle and this model improves the situation. Print upright with a brim.
🎅 Merry Christmas ! 🎅 Easy to print : just print it in Vase mode / Spiral vase. Printed in PETG / Nozzle 0.4 mm / Height 0.2 mm Demo file with this settings. Like it ? ❤ Check my Christmas collection here :…
I took an already great model by Line Arc Line that I have used extensively throughout my home and welding shop, and made it a single version as a great way to hang and display my welding helmets. I used Matter 3D Matte Black PLA at…
TBH I don't know what should I call this pattern. Print it upside down if you want. Should work both ways
The picture is slightly outdated. This is v2 with a tighter and sturdier nut hold. I printed this with 50% infill. 0.2mm layers. 3 perimeters. But any config is probably fine, use your own judgement.
Squiggly wall art formed by summing three rotating vectors. Four ‘preset’ STLs are included. You can edit the parameters or randomise them in the OpenSCAD customiser (which has details of how to do so). To access the presets in OpenSCAD,…
English Some time ago the switch of my old paper shredder broke off and I was not able to use it in this state. It would be possible to just set it to "automatic mode", but then it would not be possible to switch it off or set it to…
Reparatur für Einrastfunktion des Quigg MD 17518. Druckoption: PLA 20% Infill
Printed versions available for sale on Etsy
Einstell-Schlüssel für QUIGG Frost-Schrank kann an einem Schlüsselbund oder einem Band befestigt werden. Gemacht um die Temperatur in meinem Tiefkühl / Frost-Schrank richtig einzustellen. Kann eventuell auch für andere Hersteller passen.…
Einstell-Schlüssel für QUIGG Frost-Schrank mit Einkaufswagen Chip Gemacht um die Temperatur in meinem Tiefkühl / Frost-Schrank richtig einzustellen. Kann eventuell auch für andere Hersteller passen. Zum einstellen auf -18° C empfehle ich…
schnalle für den Aldi nass trocken sauger
A printable, magnetically mounting version of "squiggles n' dots" rank badge. Print in orientation provided, insert 6mm magnets in the holes (press fit), paint and enjoy.
A printable, magnetically mounting version of "squiggles n' dots" rank badge. Print in orientation provided, insert 6mm magnets in the holes (press fit), paint and enjoy.
This thing holds all my soldering items (and fits a little spool of solder in the first “pocket”) but you can also use it for pens and whatnot! This is a longer print, try with .2mm or .15mm for better results. doesn't require supports :)…
Squiggles vs. The Mysterious Sock 🐍🧦 Deep in the shadows under the bed, Squiggles spotted his greatest nemesis yet: the Mysterious Sock. It lay there, motionless, but Squiggles knew better. This wasn’t just any sock – it was a legendary…
SquiggleAide is an assistive writing and drawing aid designed for individuals affected by arthritis, paralysis, reduced motor function, etc. This tool helps users write or draw comfortably while requiring minimal grip strength to hold a…
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Customized version of https://www.thingiverse.com/thing:1571860 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1571860 Instructions Using the following options: Base_Diameter = 34.3 Base_Overlap = 45…
Phone stand for your desk, printed without supports. Features cutout for cable routing and charging your device! Perfect for desktop organization and cable management!
There is 3 models, one with all diffrent textures, one with just weaves and one with just squiggles.
