Liczymy pasujące modele…
This is a 1:2,000 scale model of an Arquitens-class Light Cruiser from Star Wars with two versions. The Republic Arquitens ("print_sw_arquitens-republic.stl") is based on its appearance in Clone Wars, the Imperial Arquitens…
Now that the Arquitens class (the Class 546 variant anyhow) made a central role appearance as Moff Gideon's flagship in the latest season of The Mandalorian I've been able to completely rework my old model from new reference photos,…
Eine 3D-gedruckte Fliegenklatsche, die vollständig aus PLA (Polylactid) hergestellt wird, ist ein praktisches und umweltfreundliches Werkzeug zur Bekämpfung von Insekten. Sie wird mithilfe eines 3D-Druckers produziert und bietet die…
Link to improved version A replica of the imperial arquitens-class cruiser as seen in Star Wars Rebels. The model is at 1:10,000 scale. The photos show a larger print at 1:2,000 and a smaller one at 1:10,000. Print instructions I would…
1x1 Gridfinity module for a single 36mm bottle. This module is suitable for Liquitex, Vallejo and other bottles of up to 36mm diameter. Prints without supports. For multiple bottle holders in a staircase configuration, I recommend…
Spanish: El pitorro donde está el cojinete/rueda de la mosquitera corredera se rompió, así que me hice uno nuevo a base de muchas horas con el pie de rey. Sirve para las mosquiteras correderas de aluminio con esquinas de PVC que usan…
I got the idea for this model from a YouTube video, so the principal layout isn't mine. Can't find the video for reference. The mathematics behind it is not terrible hard. But when it turns it's somehow mesmerising. As a lot of these kind…
Mas de 17 archivos de mobiliario a escala 1:100 para maquetas de arquitecturas, entre mesas, escritorios, sillas y otros
Stand holds up to 49 tubes of Liquitex Basics (22ml) in rows of 7. Platforms snap into sides and sides slot onto base for added rigidity. This rack is pretty solid and works fine without the base if you prefer. Lay parts flat for easy…
para las mosquiteras, agarre que se suele romper, modelo con tornillo de acero y pieza plastico para evitar la rotura
Gancho de reemplazo para mosquitera. se usa tornillo M5 de 40mm Has my design been useful? I accept a beer. Thank you! ¿Te ha sido útil mi diseño? ¡Te acepto una cerveza! Gracias. https://paypal.me/yoxxxoy Print Settings Supports: Yes…
-Rosca:M5x0.8 -Tiempo de impresion: 33 minutos -Cantidad: 2g -Consejos: imprimir como en la imagen, debes colocarlo con cuidado es una pieza frágil -STL optimizado -Thread: M5x0.8 -Printing time: 33 minutes -Weight: 2g -Tips: print like…
Holder for paint and paint brushes. The main holder fits 4oz liquitex tubes. The multi-size should fit the smaller tubes but I didn't have any on-hand to test it out. I glued the handle onto the base with 5-min epoxy.
Rodas para redes contra insetos, janela alumínio Category: Other
This project is a remix of FoxBlox's "Mini Commodore SX-64" model, with many changes and tweaks. This one is much larger than the original, making it easily printable with common 0.4 mm nozzles, and I have hollowed-out the interior of the…
Pieza de repuesto para gancho de mosquitera. Print settings for my Kobra 2 Neo: Layer height: 0.1 Print velocity: 10mm/s or 20mm/s
trava para tela mosqueteiro, uma alternativa para as versões comerciais.
I designed this model to hook up to my pegboard all my liquitex ink's bottles. While most of the pegboard-related models are for “ikea pegboard” or “american ones” with holes in inches, this one is designed for “european” pegboards, like…
Hice este tope para poner en las guías de las mosquiteras de las vantanas de aluminio, vivo en un quinto y el aire siempre me abre la mosquitera. Tengo otra mosquitera en el ventanal del comedor y el mismo rumba me abre la mosquitera. Es…
If you are like me you have difficulties remembering what sort of pellets you have in your hopper. I made this so I can tag the hopper with the right wood. In the design I made room for a 3x8mm neodymium magnet so I glued in place. I also…
EN: My net windows didn't have a handle and sometimes it was difficult to open or close it. Now with the handle placed in both sides aprox 50cm from the floor it prevents the frame to lift and jam. Bolts used: 2,5 x 10mm head 5mm ES: Mi…
Perdí el original y lo diseñe en fusion 360. Recomendable imprimir en PETG o ABS y poner al menos 4 perimetros.
This bracket holds a Mele Quieter 3C to the televue clamshell. I had to move from using the vixen dovetail mount design because I put a finder scope there instead. The bump on the side of the bracket indexes into the 3.5mm headphone jack…
Not quite Optimus Prime :)
Designed this to hold the Nautlius shell I printed to go with my colleciton. Made it by solidifying the back and removing it from a cone, then cropping the top. Has been holding it well for about 2 years. Category: Animals
No hay mucho que describir, una esquinera para una mosquitera antigua.
I bought a case that was B stock because a foot was missing. So I designed and printed my own, 30 minutes later it was perfect. It can be mirrored in the slicer, both sides are symmetric. Since the rubber pad was also missing, I designed…
A box with holes in the sides for cords to go in and holes in the front for them to go out in an organized fashion. No more messy tangle of cords to get in the way on top of your desk again!
-----Hardware Required----- 1x: 8x10mm Spring 3x: 8x20mm Spring 2x: M3x6 1x: M3x12 4x: M3x20 (or M3x25) 9x: M3 Heat Set Inserts Note: The parts should be toleranced properly, but make sure everything that moves actually moves! feel free…
Esto es unos tiradores para facilitar la apertura y cierre de los postizos que se ponen en puertas y ventanas para que no entren insectos en nuestras casas. También puede utilizarse para puertas de armarios,cajones, etc. He creado dos…
Intended to lie flat so you can see all the labels, but printed vertically so I could fit it on my platen. This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/2OLLddTw2gG Category: 3D Printing
Fits 4x liquitex inks, print with the same recommended settings as the rest of the set.
Gridfinity organizer for Liquitex 22ml paint tubes from the starter kits
I made this in fusion 360 as a little project. The one in the photo isn't painted after being sanded down so it doesn't look the best, but irl it looks nice. I made two version of it, one where you can print the entire vase in one go or…
Tray to hold large tubes of Liquitex Acrylic paints. Shown in a vertical format because it's too wide to print laid out. Use supports for the alternated rows' bottoms. (They are alternated to make it easier to see the paint labels, with…
Material: PETG Druckereinstellung: Layerhöhe 0,2 / Infill 20 % honeycomb / Wände 5 / Schichten 5 oben, 5 unten / Support partial Gutes Gelingen und über ein Like würde ich mich freuen. Good luck and I would be happy about a like.
Was looking for a holder to organize some paint tubes. This one ended up working out great. No glue needed, it fits snug inside the bin. Holds the tubes very well. I was even able to turn it a bit past 90 degrees vertical and the tubes…
Skaids paint bottle holder that can create a nice layout for Vallejo / Liquitex (36mm) paints. Print Instructions Print without supports and placed so the top of the model is down. (See Pictures) Assembly Start at the top and work your…
Got a messy bench and need something to hold your paint bottles while still being able to see the labels clearly, and easy to grab and replace? Here you go! Enjoy!
Simple tray / holder to organise my Liquitex inks so I can move them and see them easily. Print instructions Any layer height and infill will work.
A 1x3 Gridfinity cube to hold 3 x Liquitex Basics Acrylic 118ml paint tubes. The hole is ø 38.5mm wide and should fit other paint tubes with a +/-38mm diameter. Tested with: Liquitex Basics Acrylic 118 ml Reeves Acrylic Acrilico 75ml Let…
The overall size of the model is the same as the Vallejo Paint Rack by Stu Cameron, but I have replaced the curved shelves with straight shelves to hold bottles of Liquitex Inks (and anything else up to 95mm high. You need to print both…
A quite small (QS) motor for fischertechnik with a size of 30 x 30 x 20 mm and three-way plug connectors. Part list: DC motor 130 , preferably in a 9V version, contacts slightly bent upwards, so that they make contact with the two…
I made this for stacking and mixing machining coolant in a 5 gallon bucket. The gaurds touch and make a tunnel. It surprised me how well it actually works with only two fit together. Fits over either a ¼"-20 or a 6mm thread. Arrange each…
Model can be printed on its base without support, because overhang wall is designed at 45° angle. I have printed it using 2 walls, 0.28mm layers and 10% adaptive cubic infill and would be printed very well if I did not forget to change…
Modelado de la iglecia de Zoquite, comunidad de Guadalupe, Zacateca, México.
A paint holder made for Liquitex acrylic guache and compatible with other container up to 41mm. https://www.multiboard.io/ Sizes This holder occupies 9 spaces horizontally Slicing recommendation You should print the box with 3 perimeters…
It's a phone stand. Not a perfect one, but a cute one. Thin enough to reside in your wallet. And you'll need one more card. Or a pencil. Or a pen. Not too strong with a card for vertical orientation, but horizontally works fine.
