Liczymy pasujące modele…
I picked up a nullbits Scramble while looking into mechanical keyboards and decided to build a case for it to have a macro pad added to my setup. It would be reasonable to just stick some adhesive feet to the bottom of the assembly and…
This is a 3D model for the CS:GO Karambit knife. The model is 1:1 scale and is 19 cm (~7.5 in) long. The download contains 3 different models, including the full body, and two different split version. If you have any problems, contact me.…
For Raspberry Pi Zero W so you can use Octoprint with your MK3/MK3S/MK3S+ printer. https://help.prusa3d.com/en/article/raspberry-pi-zero-w-preparation-and-installation_2180 If you prefer a step-by-step guide, it is available here:…
Karambit knife with a lot of details. Printed on MINI, 0.2 layer height, supports
NEW FIXED FILE !!! This was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
I had old utility blades with no usage laying around until I found this awesome design . I thought a few improvements could be made, so I changed the design a bit and added “grippy” features and “clicky” flexures. You can find a video of…
So, I got a little side-tracked and designed this, hope you like it!
Karambit split into three separate models
An minimal yet elegant combat Karambit knife. The Finger cutouts use the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5 15.7 0.785 or…
Made to fit snuggly so that it doesn't wobble. I also added some foam tape on the outside for even better fit. Confirmed fits 2015 Camry and 2019 Kia Sorento but should fit most 3.2 inch car cup holder. Probably should use filament with…
Available also on Makerworld: click Keyrambit Keychain This is a keychain spinner inspired by the karambit knife. It requires a 6803 (61803) bearing to function. It is a great way to fidget and relieve stress, and it can also be used as a…
A karambit I derived from another model. The two halves can be glued together with or without pins, but the pins will make guiding the two halves together easier. I DID NOT MAKE THE ORIGINAL DESIGN.
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Description: Elevate your fidget game with a 3D printable Folding Karambit Knife Fidget Toy! This unique creation seamlessly combines a sleek design inspired by a CRKT style folding Knife with the satisfying functionality of a fidget toy.…
Popular well with CS2. I also created a remix where the blade can be printed separately. Without AMS.
Edit: Added version for more common 2-notches 61mm/2.4inch blade. Whole thing is slightly bigger but it still fits nicely in the hand. My remix of super cool design I found here on Printables:…
Self modeled in Fusion360 off screenshot from a Karambit blue gem in CS2, enjoy!
Keyrambit for 6803 ZZ or RS bearings Material: PLA SILK DUAL COLOR ( RED and BLUE ) ERYONE Others: 6803 ZZ bearing 26x17 Printer : Anycubic Kobra 2 PRO
Fast and easy to print, the bearing needed is 61703ZZ 17x23x4mm, I ordered mine here: https://aliexpress.com/item/32816178869.html the bearing fit is tight so use something hard to press it in
First a little explanation: Subitus means impromptu in Latin. Karambits are a type of Indonesian martial arts knife. Disclaimer: Karambits are very dangerous and (quality) utility knife blades are razor sharp . Even if you are an…
My version of 3D Printable Folding Karambit Watch the video: youtu.be/GuLe6meCFzg I was inspired by Koss video: youtube.com/watch?v=JAw94JMxOrc BoM: 4x Door handle screws, 8x M4 washers, CA glue. If you don't have door handle scerws you…
Introducing the remarkable 3D-printed Karambit Key Spinner, a fusion of functionality and aesthetics that seamlessly combines the practicality of a keychain with the mesmerizing charm of a spinner toy. Crafted with precision and…
Karambit CS:GO Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.12 Infill: 25% Filament: Smart materials PLA Black and red Category: Toys & Games
Printed with 0.2mm layer height.
Źródło oznaczyło ten model jako treść 18+.
Length - 213 mm Handle length - 140 mm Blade length - 50 mm Blade holder thickness - 5 mm Knife thickness - 17 mm Lock type - Back lock Print settings: Infill -100% Material - ABS plastic Layer height- 0.2 mm Print speed: 50 mm/s Screw…
Brief History of the Karambit: The karambit was originally an agricultural implement designed to rake roots, gather threshing and plant rice in most of island Southeast Asia. It's a smaller variant of the Southeast Asian sickles. It still…
Źródło oznaczyło ten model jako treść 18+.
UPDATE 25/08/2026: Updated description. UPDATE 7/08/2026: Removed old files. MAJOR UPDATE 16/07/2026: 2.0 out now, no supports and better looks. SUPER SMALL UPDATE 22/03/2026: I've changed to xtrud3r, or x3 for short! Also changed the…
You have to print it in 2 parts and then fit it in the fall, you have to pay attention that when they fall into your stack, they fit together carefully, so you don't even need glue, because if it breaks, it can be replaced.
Just add 61704 or 6704 bearing and you are ready to spin!
I designed this adaptor for the cupholder in my 2018 F150 to hold either my 14oz Yeti Rambler or 32oz Nalgene bottle to keep them from sliding around the truck. Should fit 2015-2020 Ford F150's and also confirmed to fit in the 2021 Ram…
Printed at 0.2mm layer height with a 0.6mm nozzle on my MK3S
Simple karambit fidget toy, not sharp, not pointed, no gluing and no support necessary. --- Einfaches Karambit Fidget Toy, nicht scharf, nicht spitz, kein kleben und kein Support notwendig.
This project is a remix of the Valorant Velocity Karambit by MaitreLancelot on Thingiverse ( https://www.thingiverse.com/thing:5198504 ) This project was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot…
3D model of Karambit, in parts so you can print easily
A remix of Libang's Raspberry Pi Zero 2 W frame. https://www.prusaprinters.org/prints/85119-raspberry-pi-zero-2-w-frame-for-einsy-rambo Which is in turn a remix of the original Prusa Raspberry Pi Zero W frame.…
Just simple Gravity Karambit Knife Fidget Toy. Need 5 M3 12 bolts to assemble. Some glue for blade.
Banana Training Karambit. Print with a good amount of infill for a nice momentum. Have fun printing.
The print consists of two parts. Print them separately and slot them together with some glue.
See Original : https://www.thingiverse.com/search?q=foldable+karambit&type=things&sort=relevant Print Settings Printer Brand: FlashForge Printer: Adventurer 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: KCamel PLA Black…
This karambit utility knife prints in one piece and requires a razor blade and two M3 button head screws . Use the techniques shown in this video to produce different designs! If you are looking for a compact utility knife, check out my…
The karambit is a traditional knife from Southeast Asia, featuring a curved blade resembling a tiger's claw. Initially designed for agricultural use and later adapted for martial arts such as Silat, the karambit is ideal for…
I have printed the original from Dani Projects and as I wanted to glue the handles together, they wouldn't close fully. So I added some distance (total 1,2 mm) to them and it worked like a charm with no need of cleaning up. Use supports…
This remix of Dani Projects' Karambit Knife streamlines the printing process, especially for multi-color printer setups. It combines the original parts into two, a half-knife and a half-handle, enabling one-shot printing without…
I now als designed the knife in two pieces so dont need as much supports as before
I used no supports. I split the model into two parts and then glued them together.
so this is a folding karambit, credit to Biobernhard (thingiverse creator). i found this model online and re edited it to be able to be printed in separate colours, only requiring a little super glue to keep them together. ill try to find…
Clicky karambit, but with no overhangs. I highly recommend using the 3mf with negative parts for the M3 nuts to recess into. I exported it from Orca Slicers, and it unfortunately might not work in Prusa Slicer.
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Foldable Karambit with locking mechanism. Print settings: Infill -100% Layer height- 0.2 mm For clean top layer turn on “ironing” M3, 14mm x 3 for spacer and blade lock M3, 12mm x 1 for blade holder Add 4 more washers on the cap head side…
I recommend using gold colored filament and later paint the print with silver/grey and black color.
Handy box cutter or decorative karambit knives - available in 2 sizes - 10 gram prints
This is a case for an Einsy Rambo Board with room for a Raspberry Pi 3b/b+/4 and buck converter that fits the Bear Upgrade v-slot frame. STOCK FRAME VERSION:…
A fun little twirly whirly Utility Knife A upgrade to my previous Mk3 knife. this has improvements around the blade for better hold and safety, Handle MK4 is 7mm thick whereas the Handle MK4.2 is 6mm thick Please use it safely and don't…
https://stllink.pages.dev/
A family member wanted an adapter for their cup holder so that it could hold their 14 oz Yeti Rambler and its hot coffee safe during their morning commute. A lot of the existing designs did not allow for printing without supports or…
Print with a smaller layer height if you are interested in an improved blade surface.
Keyrambit for 6803 ZZ or RS bearings Material: PLA SILK DUAL COLOR ( PURPLE and GOLD ) ERYONE Others: 6803 ZZ bearing 26x17 Printer : Anycubic Kobra 2 PRO
As a kid I witness my grandpa singing at a small instrument … later he give it to me …. lost it in my childhood …. This is an interpretation of what I use to have …. the original had a metal limb that vibrate at the mouth entry and made a…
The model doesn't need any hardware to assemble. If you want a stronger bind, you can glue the pins to each other as shown in the pictures. Print settings: PLA 5% infill gyroid prusa mk4s For the model you need to download each STL file.…
This is a remix of the Raspberry Pi Zero frame for Einsy Rambo by Prusa Research . The original only fits the Raspberry Pi Zero, but this frame fits Raspberry Pi Zero W as well as Raspberry Pi Zero 2 W. (The Zero 2 has components in…
Keyrambit for 6803 ZZ or RS bearings Material: PLA SILK DUAL COLOR (BLACK and GOLD ) ERYONE Others: 6803 ZZ bearing 26x17 Printer : Anycubic Kobra 2 PRO
Remix of original frame for new Zero 2 W. New Zero 2 W have slightly different placed components. Updated model to V2. No need to use remix.
There were some problems with the original, so I fixed them Category: Video Games
rambox dividers. Just getting started on this project but finally have something that fits flat on a prusa build plate. V4 has a ram logo I got from here: https://www.thingiverse.com/thing:3134647 V10 - V3 was similar to some commercial…
Available also on Makerworld: click Keyrambit Keychain This is a keychain spinner inspired by the karambit knife. It requires a 6803 (61803) bearing to function. It is a great way to fidget and relieve stress, and it can also be used as a…
A Minimalist Karambit Knife with a small blade. The Finger whole is the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5 15.7 0.785 or…
Made a simple karambit because I wanted to try making something with the bearing I had left. Used a 6704 bearing or the equivalent to it with 20mm inner, 27mm outer and 4mm thick dimensions. Recommended build space 200x200x10
Summary This is a case for an Einsy Rambo Board with room for a Raspberry Pi 3b/b+/4 and buck converter that fits the stock MK3(S) frame. Supports connecting Pi via USB or GPIO. Supports wiring for MMU2. BEAR frame version:…
Editing my model in 2 parts so that the blade can be printed separately.
Bring the ultimate flex from Roblox Rivals into the real world! This is a 1:1 scale, highly detailed 3D printable model of the iconic Gold / Champions Karambit. Designed with a clean, low-poly aesthetic that perfectly matches the game's…
This is a complete remodel to ensure it adequately supports the Raspberry Pi Zero 2 W, as the original model interferes with some resistors/diodes on the pi. This remodel also add a bit more clearance for the headers as I found that some…
¡Descubre la navaja KARAMBIT plegable, la herramienta perfecta para tus aventuras de campamento! Con su hoja curva de alta precisión y diseño compacto, esta navaja ofrece máxima versatilidad para cortar, rasgar o desollar. Su mango…
Velocity Karambit from the new episode 4 battlepass from Valorant ! Scale to your needs, share your makes and i like trains . ''VALORANT VELOCITY KARAMBIT'' was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by…
This handle was modelled after the official Yeti Rambler 20 oz Tumbler Handle from this link, YETI Rambler 20 oz Tumbler Handle | Sport Chek . It has a slightly loose fit so that users can add electrical tape to the inside of the rambler…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
This Karambit is not only useful, its also DANGEROUS! It's also pretty sleek. No hardware needed. I want to see those makes! This is a remix of https://www.thingiverse.com/thing:6195722 Print Settings Printer Brand: ELEGOO Printer: ELEGOO…
Bring your favorite in-game cosmetic weapon to the real world or your digital asset library! Inspired by the coveted Legendary Key Bundle in Roblox Rivals, this 3D model flawlessly replicates the iconic Keyrambit knife skin. Originally…
This is the Prime Krambit pulled from the Valorant game files and optimized to they are actually printable, Enjoy. -WARNING: NONE OF THE FILES ARE SCALED CORRECTLY Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't…
karambit knife dummy for cs2 fans
Here’s a quick model for a 14oz Yeti Rambler mug (approximately 100mm diameter at the base). I couldn’t find one that worked for my needs, so I designed this to fit nicely in the 2024 Ford Escape cupholders. The model is based on the…
This box fits on the beam of the LowRider CNC v3, and fits the 12864LCD and the Rambo. Here is the LCD box that pairs well with this. https://www.printables.com/model/20915-full-graphic-smart-controller-case
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Karambit Blunt Training Knife for martial arts use. Safe to practice martial arts skills Print instructions Category: 3D Printing Summary Karambit Blunt Training Knife for martial arts use. Safe to practice martial arts skills. For…
A Claw Shaped Minimalist Karambit Knife. Perfect for opening boxes!! The Finger cutout is 22mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5 15.7 0.714 or 71.4% 6 16.5…
Karambit EDC Utility Knife A compact, rugged, and ergonomic karambit-style everyday carry utility knife paired with a matching custom sheath. Hardware Required: 7x M3x5mm (DIN 7984 or ISO 7380) or BT3x5mm Screws (AA108) (Screw head height…
Keyrambit by nexi 3d BEARING SIZE 6803 TERMS AND CONDITIONS OF SALE If you plan to sell a ready-made 3D print using my model, I require that the description include information about the origin of the model (by whom the model was designed…
A simple yet addictive keychain spinner. I made a version with a bearing but idk if I will post it lmk.
Keyrambit for 6803 ZZ or RS bearings Material: PLA SILK DUAL COLOR ( PURPLE and BLACK ) ERYONE Others: 6803 ZZ bearing 26x17 Printer : Anycubic Kobra 2 PRO
Brambo is here to crash through your print queue with round vibes, snorty charm, and... an optional tail! Cute, compact, and a bit wild – he’s your new forest desk mascot. ✔ Includes two 3MF files: • Monocolor version – with and without…
Just scale up/down the model by a few percent if the bearing doesn't fit properly, but keep in mind that the bearing holds in only by the pressure of the outer ring. bearing i used:…
