Liczymy pasujące modele…
Stand to reposition the original LCD display to the top base. Reduces the printer footprint and modifies the angle so it's easier to view and operate. Uses original mounting points of the screen too. Screen holds in place respecting…
UPDATE 1: Pin improved for V1 - Try Pin V1. 2 FIXED if the nebula pad is to loose with Base V1 UPDATE 2: I built a new holder from scratch (Display Base V2 + Pin V2). In V2 I fixed the problems that were present with V1 such as the wrong…
This is a light remix of the Honeycomb Stratocaster Body by Conceptor. ( https://www.thingiverse.com/thing:3174465 ) I resliced the body into 9 pieces rather than the original 6 so that there is only 1 seam under the strings where the…
Model printed in PLA and PETG in Creality Print on the standard "Normal" profile. Layer height 0.2, nozzle 0.4, filling 15%. Brim and support disabled. Pins should be printed separately, Brim and support optional, but not suggested, with…
This is a simple and good looking adapter to rotate orginal filament spool holder. For assembly you will need: 2x M5 nuts 2x M5x20 screws (flat head recommended) 2x M5x12 screws CA glue to fix the nut inside the hexagonal hole
Use this PIN with ' https://www.printables.com/model/592886-ender-3-v3-se-ender-3-se-lcd-reposition-stand ' for move stock LCD. The lock the screen with the new base.
Overview I've struggled with knee pain while sim racing on my Fanatec Clubsport V3 pedals due to the brake pedal placement. Some folks have successfully swapped the brake and clutch pedals to help with this, but I think this is a sub-par…
First, I needed to reposition the LCD on an Ender 3 V3 KE. The slots and posts are reversed from the SE (the slots on the KE are on the LCD) and I was unable to find an alternate LCD mount for the KE. TinkerCAD had a hard time with…
Update: I forgot that the Ender 3 KE has a different spool stand, with an additional part that makes it incompatible with my model. As such, I've updated my model to support the KE stand. Please let me know if it's still incompatible, in…
Reduces the printer footprint and allows to move the printer closer to the wall on the right side.
Cam reposition with swivel and tilt for fully custom POV. Takes 3x M3x 4.5mm OD x 5mm L heat set inserts and 4x M3x10ish screws (tbh didn't measure which ones I used) Credit to @Henryk for the swivel idea.
Ender 3 V3 SE LCD reposition stand variant. Reliable holder, verified installation location, does not interfere with calibration, is equidistant from the hot table and the edge of the case. I suggest you familiarize yourself with the rest…
THIS MODEL IS NOW DEPRECATED (I mean it still works great I just updated): https://www.printables.com/model/1089271-svo8-camera-reposition-adjustable Never understood why Sovol hung the camera upside down like that, the view was just…
The original design is awesome & I love the way it looks & works, but some spools are wound too loose, so added a guide. Guide was borrowed from https://www.printables.com/model/115109-filament-guide designed by Matt Boyer, & fused…
Use this PIN with 'https://www.printables.com/model/592886-ender-3-v3-se-ender-3-se-lcd-reposition-stand' for move stock
Pretty much the same as the original, only made it a bit more optimal for printing (less supports needed). Print with: Draft - 0.24mm Cross Hatch infill, 15% Supports - Tree/Organic (auto) Edited in OnShape:…
Remix of camera reposition for Sovol SV08 Takes a M3 threaded heat insert in the center. Make sure you set it at the correct angle, don't just melt right thru it. Camera cable is just long enough, may need some cable adjustment. Flip the…
[ FLIGHTPATH ] , a 90° Offset Filament Runout Sensor mount for the Centauri Carbon that uses the 2 OEM screws, no supports, & the OEM cable & PTFE tube length. Designed to route the PTFE tubing straight upwards rather than from front to…
The original design is great but it just collide with other model I am using, so i modified the base by lowering the angle. The angle is adjusted so it will also not collide with the extruder.
Uses same screws except requires 8mm steel shaft (I used DIN 931 8.8 M8 x 120 bolts shortened with with heads removed) through rollers. Only works with 2 inch belts. Suitable for high torque applications. The orignal model with…
Bracket to move the position of the glass shelf between the two screw holes. I needed to raise the height of the top shelf to better display the LEGO Saturn V and lunar lander, and this solves the problem perfectly. Printable without…
I've resized some of the boxes for Leon_H's spirit island insert. I like to have all the spirit materials in one box and everything else in the other. You Still Need the other pieces from Leon_H's Spirit Island Box These modified files…
Recently i converted my CR10 extruder to a direct extruder. now the filament sensor sits below the extruder intake. So I designed a holder to attach it on top of the printer. since it is near the spool I made it rotatable. No glue is…
This is an improved remix of an already great idea and very nice model! Thank you @ https://www.printables.com/@shoeys_2048431 for that! However, I noticed a few things during assembly, which is why I redesigned some of the components.…
Work in process! Adjustable Tapo c110 for the SV08 gantry was designed to replace the stock camera. Depending on your setup you'll have to figure out how to route your cables. Would suggest printing the adapter in higher temp filament…
reposition of the extruder fan to allow visual access to hotend and filament. this thing adds an aluminium heatsink and moves extruder stock heatsink and fan 23mm far and 20mm right from extruder motor allowing for visual inspection of…
This adapter moves the Filament case from the back to the side using the handle slot as the anker. There was no need for glue or sticky tape to hold adapter in to the handle slot, friction was enough. Recommend to printing both parts…
What y made and why: If you escalate it smaller (60% in my case) some of the parts aren't recognized by the slicer. I repaired the files with orcaslicer. I also change the position of the models for the best for FDM 3D printers. -------…
I wanted to reposition the screen to have it vertical, saving a bit of room. This will take M3 screws and bolts to attach the screen to the block. Here is the raw onshape link if you want to mess with the model :…
I printed hinged version of the riser and later encountered a sensor reposition solution, which fixes most (if not all) of my K1 max problems with filament under extrusion and heat creep that I had. I just combined two models and printed…
Laptop stand designed by bartnijs is my best choice for my laptop stand, you can download it from here: https://www.thingiverse.com/thing:3708825 But I found that the pin is losses and flimsy, so I change with M10x36 bolt headless and…
My biggest problem with the ender 3 is the size of the fan shroud and how much it covers the nozzle. Even if you have your printer in a well lit area, it's difficult for light to get to the nozzle when you are printing your first few…
This is a tweak of the support bracket only to pull the hole over in X/Y/Z. Print multiple copies to get a clean print.
This adapter allows longer microphones to be mounted on the Mission 1 without them being inside the frame. The number in the picture was just for my own testing and to help me tell them apart; it does not appear on the print file.
refrigerator Bar reposition
do u have endstop switches but the big kind ? i doubt it but if you do here is a print to reposition it to the A drive.
What y made and why: If you escalate it smaller (60% in my case) some of the parts aren't recognized by the slicer. I repaired the files with orcaslicer. I also change the position of the models for the best for FDM 3D printers. -------…
Reduces the printer footprint and allows to move the printer closer to the wall on the right side.
I have Ender 3 V3 SE but different dimensions of holes. I had to compensate it with 0.25mm. You can try to print those files before final print of the stand.
This extension allows you to reposition your water bottle mount points 64mm up or down. 64mm is the standard distance between mount points, so this would essentially move it one full mount away. This was useful for my smaller frame…
Edit 26.7.2021: Small modification of the wall thickness. Set extrusion width to 0.4 mm. I don't like the original hinge pin design so I prepared my own. Tolerances are made for my printer and are really tight. Thanks* @bartnijs * for…
Relocation of filament sensor and cleaner to the front right of the printer because of better accessibility. I used this cleaner…
This is a filament guiding bracket for Ender 3, if you wish to reposition thefilament spool from the top of the printer. It guides the filament from the side or the bottom of the printer with a roller bearing. This helped me a lot in…
Spool holder reposition with filament runout sensor attachment
A stand for moving the original LCD display under the print table. Reduces the printer footprint and changes the angle
