P
PrintablesHeissen
Cody Rhodes multicolour logo
At 100% resolution (Layer height 0.2) the color changes are: Layer 0: Blue Layer 5: White Layer 9: Red Layer 12:Black
- Pobrania
- 733
- Polubienia
- 74
- Ocena
- 5
Wyniki wyszukiwania: rhodes
Liczymy pasujące modele…
P
Printablespizzyflavin
Rhodes Piano Hammer
Modeled after a 1977 Rhodes Mark 1 Stage 73 Piano hammer. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: Yes Infill: 100 Category: Music
- Pobrania
- 215
- Polubienia
- 10
- Ocena
- 0
P
PrintablesFactorium of TS
Colossus of Rhodes lamp!
There was 7 wonder in the ancient world. One of them is the Colossus of Rhodes. It stood in the city, and build for the sungood, Apollo, after the failed siege of Demetrios Poliekretes. This is a modern reproduction of it, made for…
- Pobrania
- 194
- Polubienia
- 11
- Ocena
- 5
P
Printablesbullitt168
Rhodes Piano Mortise Sizing Cauls (Key Bushing Plugs)
I designed these Cauls in Fusion 360 when restoring my Rhodes MK1 Piano earlier this year. I took inspiration from here and several other forums & YT-Videos. See the plugs in action on Youtube in this playlist, where i collected some…
- Pobrania
- 192
- Polubienia
- 12
- Ocena
- 5
P
PrintablesGooseWerks
Rhodesian A76 Radio
This is a replica Rhodesian A76 radio. This was created for the purpose of reenacting various conflicts and historic displays at events. The knobs are slightly undersized so they can fit into the "Top" plate and spin or be glued in place.…
- Pobrania
- 77
- Polubienia
- 10
- Ocena
- 0
P
PrintablesBullet_3d
Cody Rhodes Multicolour logo for the filament holder of the ender 3 v3 se
check the original model for print directions. I'm gonna be honest, I'm too lazy to copy and paste them. It's also so you can give his model views aswell
- Pobrania
- 63
- Polubienia
- 10
- Ocena
- 0
P
PrintablesMusicGearMD
Fender Rhodes/Rhodes Damper Rail Bushing
A very basic model--the bushing that separates the damper rail from the action rail in a Rhodes piano. These should be printed in a high strength material that has self-lubricating properties such as PA or POM. It is possible to use PETG…
- Pobrania
- 41
- Polubienia
- 6
- Ocena
- 0
P
PrintablesZwoop
Duncan Rhodes PA paint holders for Threadboards
These are basic thread boards holders, of various sizes, suitable for Duncan Rhodes Paint Academy paints. These paint bottles are 24mm in diameter, so anything around there would fit. I've also made a similar set for the Citadel range of…
- Pobrania
- 41
- Polubienia
- 7
- Ocena
- 0
P
Printablesskatt_mann
Fender Rhodes Cheek Block
I was fixing up a ‘72 Fender Rhodes that was missing the cheek blocks, so I designed this model from scratch instead of buying reproduction blocks. I secured each block with a wood screw into the existing hole on the frame, and then…
- Pobrania
- 34
- Polubienia
- 2
- Ocena
- 0
P
Printablesasdfqwer426
Fender Rhodes Piano Rear Logo
I found models of a few other Rhodes logos, but not the rear name plate. Mine was broken in half and mostly missing, so modeled up this replica. It's not perfect, the original has more of tapered edge from the text down to the base, while…
- Pobrania
- 27
- Polubienia
- 7
- Ocena
- 0
P
PrintablesKrischu
Rhodes Hammer Gelenk (hinge)
Es gibt ein Modell des Hammerkörpers für Fender Rhodes. Dem fehlt aber das Gegenlager, das Kniegelenk, mit dem der Hammer am Holzrahmen befestigt wird. Aus PLA (Thermoplastisches Druckermaterial) hat das Modell genügend Elastizität, um…
- Pobrania
- 22
- Polubienia
- 0
- Ocena
- 0
P
PrintablesGustavo Bremm
Rhodes Pickup
Make sure to print the pickup up, a bit of support is needed. 0.2 nozzle is recommended but 0.4 works too. I don't recommend PLA as it gets brittle over time.
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKrischu
Rhodes Hammer Hinge (split version)
This version is of two halves, which can be glued together after fitting. Use a spiral drill to widen the hole if necessary.
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPoncije
Rhodes MKI 73 Rubber Grommet
Fourth iteration of my attempt to print a replacement rubber part that fits easily into the original metal. 100% better than the 50 year old brittle dried up rubber. :-) “original replacement” was in my opinion a ridiculously expensive…
- Pobrania
- 9
- Polubienia
- 4
- Ocena
- 0
P
PrintablesAttila Lázár
Hueforge Stamp Colossus of Rhodes
Hello, this is the first part of the seven wonders, i used Ferdinand Knab's paintings as source model. You can resize the image in your slicer to 160*200 mm before slicing (i did it so, to make all print at the same size); and you can use…
- Pobrania
- 7
- Polubienia
- 9
- Ocena
- 0
P
Printablesasdfqwer426
Rhodes Piano Suitcase Glide Cup
My beat up old suitcase was missing both of these cups on top of the suitcase, it made aligning the piano on top a bit more difficult and the sustain pedal wasn't always aligned. One of my holes was deeper than the other, but the bumper…
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
Printablesasdfqwer426
Fender Rhodes Suitcase Top Sustain Bushing
This bushing sits in the hole on the bottom of the suitcase piano, this is different than the one found on the stage piano. I'm honestly not positive it's the perfect design as I never had my original, I worry the sustain block might get…
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
Printablesasdfqwer426
Fender Rhodes Suitcase Piano Sustain Bushing
This bushing sits on the top of the suitcase speaker box around the push rod that connects to the pedal itself. Mine worked fine without it, but is definitely a bit smoother with slightly quieter action with this installed.
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTheGreatRender
Colossus of Rhodes - Helios with the Torch
Helios standing over the harbour of Rhodes, printed as one solid piece. The pedestal is laid up in stone courses with mooring blocks at the corners. Bare legs show below a fluted chiton, the torso is modelled, and the bearded head wears a…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
Cody Rhodes Multicolour logo for the filament holder of the ender 3 v3 se
check the original model for print directions. I'm gonna be honest, I'm too lazy to copy and paste them. It's also so you can give his model views aswell
P
Printables
Hueforge Stamp Colossus of Rhodes
Hello, this is the first part of the seven wonders, i used Ferdinand Knab's paintings as source model. You can resize the image in your slicer to 160*200 mm before slicing (i did it so, to make all print at the same size); and you can use…
P
Printableshgross
Rhodes, Greece - 3D Miniature
3D printable topographic miniature of Rhodes - 🇬🇷 Greece Capture the beauty of Rhodes 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 36.449, 28.226 (LatLng) . It…
- Polubienia
- 0
- Ocena
- 0
P
Printableshgross
Rhodes, Greece - 3D Miniature
3D printable topographic miniature of Rhodes - 🇬🇷 Greece Capture the beauty of Rhodes 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 36.446, 28.226 (LatLng) . It…
- Polubienia
- 0
- Ocena
- 0